20845 High Strength 5-Minute Epoxy, 0.84 oz.

Great epoxy for strong repair on acrylic hot tub. It's called 5 minute epoxy for a reason! I was in the sun and about 5 minutes into things it got hot and set in about 30 seconds went from thick clear epoxy to unworkable then set. Aside from not knowing that ahead, it was easy to use and seems strong.

After much research--and much nervousness--I chose this 5-minute Epoxy for my precious jewelry project: setting a 4x3mm faceted topaz gemstone into a 22ct gold ring. It worked very well. I had to use a toothpick to apply with finer precision as the mixing tool that comes with the product is not ideal for small, detailed work. The 5-minute setting time was great, so I could position the gem exactly how I wanted after dropping it into place. The epoxy dries as clear as crystal, which was one of my main requirements. I recommend working in a well-ventilated area as the epoxy does give off slight fumes when first mixed. The cap actually works, which is good since I only used a dab for this project. Overall, this product is a good one.

Awesome adhesive! It not only worked great, the remaining epoxy mix didn't dry up when I stored it. I was able to use the remaining product to repair an additional item. Absolutely no waste!

After reading the instructions it was a 10 min job start to finish. The glass insert on my class ring had popped loose after an accidental fall to the hard ground. With epoxy, I made sure gas bubbles were of equal size in each tube before dispensing equal sized drops. Mixed, then applied to all hidden edges of insert with toothpick. Perfect! Wearing again 15 minutes later!

Easy application but didn’t last. Used to secure diamond back in ring but it didn’t last. Lost diamond. Think it’s a good product but would not recommend using to secure a stone.

My mom had a semi-precious stone fall out of a ring setting. She took it to a jeweler who wanted over $300 to reset it. What?? I bought this, and secured it back in for under $20. It’s been holding strong ever since! Great for jewelry repair

Worked really well on ceramic pitcher with a metal base. Not too runny, simple to use and re-use.

Best epoxy on the market.

Non so come, dopo il primo utilizzo uno dei due componenti si è indurito. Sono sicuro che non è entrato in contatto con l'altro e il flacone è stato chiuso subito dopo l'apertura..

Good

Perfect to put together 3D printed pieces

Pegamento de secado rápido sí, pero no le llega ni a la altura de los zapatos al conocidisimo loctite... pense que sería más resistente

Great for bonding all sorts of materials such as metal, glass, plastic, stone, ceramic, etc. Easy to mix and apply and dries crystal clear. Doesn't turn yellow like some other cheap epoxies. I just love working with this as it bonds so well and has a decent amount of working time to set your pieces just right.. around 1-3 min for small batches, in my experience.. After that it gets stringy and harder to work with. I always keep this on hand and use it for so many things! Looks cloudy when mixed but trust me... It's as clear as glass when it sets completely in about 24hrs. If you pull the plunger back a bit before you re-cap it, it saves a lot of mess in the cap and makes it easier to level both sides out a bit better for the next time you use it. I store it upright as well to keep it from getting too many air pockets.