400x300mm DIY PC Case Dust Mesh Filter, 2Pack PVC Dustproof Mesh Filter Cover with Magnetic Strip for Computer PC Case

I recently built a new PC for my son after his mini PC failed suddenly. I wanted to go with a full sized ATX build, as I usually make for myself, and picked a Lian Li Lancool 207 case. After building the system in the case, I realized that the air intake meshes were great for airflow but also great at letting dust in. I have previously made DIY magnetic filters for my Phanteks P500A case when the same situation faced me a few years back, so I looked at my options and selected this one largely on the basis of good price with a good review average. I am pleased to say it was a great choice. I had no trouble making intake filters for all of the meshes on this case. There's one particularly unprotected air intake which has very large hexagonal gaps the same size used for the rear air outflow, and I think covering that one is actually pretty important if you don't want a lot of dust coming in where SATA drives are, blowing right up into your video card through the horizontally mounted fans (you know what hates dust? horizontally mounted fans, really hard on their bearings over time as lubrication distribution is harder for them than vertically mounted fans). Please view the attached photos so you can see what I mean when I said there's plenty of materials to make all the filters you need for a case with modern airflow. Speaking of, they do reduce airflow somewhat compared to unimpeded bigger gaps, but if you're in a modern case you should still have very good airflow. I've used something exactly like this for years on my P500A case with a 12900K and it has never caused temperature issues, despite covering the entire front intake mesh so I reckon it's going to be a winner for keeping the interior clear of dust (which tends to help keep air moving nicely, you know?)

This is the stuff here, excellent thickness, plenty of material to fully filter an entire larger size gaming tower. It comes packaged in a large plastic sandwiched between two pieces of cardboard that keep it from getting beat up, folded, or otherwise damaged. No mesh will ever fully dust proof your computer, this will only increase the amount of time between routine cleanings that are necessary to keep your system running at peak performance. The holes are on this are such that they should be able to keep out pet hair, your hair, and larger material. I don't notice any restriction in air volume and temps seem relatively stable in very close to pre mesh temps, I'm seeing a .5 to 1 degree c increase which is negligible. This stuff is easy to work with, cut, and attach the magnets. Magnetic hold is pretty decent as well. After reading reviews on several others like this I noticed a common thing in that generally it's shipped in a roll which gets damaged in shipping. This was one of the few that is shipped correctly and the price is lower than others that are shipped rolled. Save yourself a few bucks and the aggravation of receiving damaged mesh and go with this one.

Worked really good. I used a paper cutter for screen and cut magnet tape with scissors. Looks very good after installed. I replaced dust filter kids messed up and made a filter for a computer that didn’t have a filter on top intake fan. I would buy this again when needed.

I am pretty pleased with this mesh. I wanted to go for a pre-sized on for my Meshify case, but couldn't find one with the right measurements. This requires cutting to size, but I should be able to get 4 perfectly sized screens out of this one pack. I also like that the magnets are wider than the originals, so you don't get the same shearingfrom pressure when cat sits on top. My biggest gripe is that the magnet adhesive isn't very good. I placed and then pressed between boards for a few hours and the bond didn't last but a few weeks. Over all I think it's a great replacement.

I only recently installed the mesh filter. I rebuilt my computer and the original dust was awful. The stock shapes (rectangle) would only have covered some of the vents. I was able to customize the mesh to fit all the vents. A straight edge ruler and pencil line made an easy job of marking the screen. Pencil lines show enough to cut the shapes with a sharp utility knife. Remember to cut the magnetic pieces to fit together to keep the dust out. Magnets work best directly on the metal case. Airflow seems unimpeded. 1 sheet covered all of my computer's vents. I may have to do a follow up review in a few months regarding the dust build up after installing the filters on my rebuild.

Works great, both the adhesive and magnetism are efficient in strength. I placed a magnet wrong and after two days I was able to peel it off and reapply it to a new spot with no sticky residue left behind and plenty of adhession to keep using the same magnet. Only using scissors, I managed to make some pretty clean cuts so it's pretty easy to use.

Perfect. Broke glass, now it's dust screen heat releasing class. Cheap. Cuts easy. Use a new utility blade.

I flip PCs and this is a must if you buy used cases. I have used this to replace a top dust filter in a Phanteks Eclipse P350X Computer Case. First, I got the rough measurements of 6 in x 12 in. Secondly, I cut it out with scissors. Then, used the scissors to cut round corners. Next, cut the magnets to fit around the filter, leaving around half an inch from the edges of the filter. Then, using the strong double sided adhesive I stuck it. Finally, I plopped it where the missing filter was and it really brought the whisk build together. It felt and looked flawless. Air travels through it nicely, preforming well. Will fit any spot you need. Great value for me flipping because people like a PC that looks nice and complete. You can also just easily remove it to clean the holes.

So, bought a case that was almost perfect... But you guessed it, it was missing any form of dust filtering from it's main front intake, ridiculous oversight if you ask me. But fun case otherwise, so went with this kit. Even slapping bits and pieces together (case was slightly longer than the max length of the mesh pieces) was p1ss easy. I even managed to cut it to size with a regular pair of scissors. Supplied magnetic bits are more than adequate to safely stick it to the front of any ferro metal front. Just know it has to adhere directly to metal, any form of plastic in between will be enough for these magnets to loose adhesion. So, good stuff, easy to clean as well. Tip: have a good look at which side is the smoothest and make sure that that points outwards, easier with cleaning the filter

Ich habe die PVC-Staubnetzfilter für mein PC-Gehäuse gekauft, und ich bin absolut begeistert! Die Größe von 400 x 300 mm passt perfekt zu meinem Tower, und mit den Magnetstreifen lassen sie sich mühelos anbringen. Endlich keine Staubansammlungen mehr im PC! Die Filter sind wirklich staubdicht, und sie halten meinen PC immer sauber, ohne dass ich ständig die Innenräume reinigen muss. Die Qualität der Magnetstreifen ist top – sie halten den Filter stabil an seinem Platz, ohne dass er sich löst. Ich kann diese Filter jedem empfehlen, der seinen PC vor Staub schützen möchte, ohne aufwändige Modifikationen vornehmen zu müssen. Für den Preis eine super Lösung!

Material de boa qualidade e de facil manuseio, recomendo!

NZXT H510i kasam için aldım, kendim ön panel boyutunda kestim. Çevresine de manyetik bant yapıştırdım orijinal gibi oldu. Cam yerine bunu takmış oldum böylece kasa hava alabildi sonunda.

Inga problem med denna, gör sitt jobb