Zinus Quick Lock Bunkie Board, Box Spring and Bed Slat Replacement, Queen

We got a really nice (expensive) bed set with our first home, and when the spaces between the slats were way too big, we really didn't want to spend even more on an expensive boxspring. First we got a thin bamboo bunkie board. It was decent, but just not enough to hold the mattress, and you couldn't sit on the ends without sagging. Next, we tried a wooden box spring and IT WAS HORRIBLY LOUD AND CREAKY. A bit demoralized, we gave this one a shot and it's perfect! Very easy to put together. Solid and supportive, no fear about ruining out mattress. Light and easy to move around. Low profile, barely adds height to the bed. Above all: QUIET

Our guestroom queen platform bed wooden support slats were falling apart. I just got a new expensive mattress for the bed and read that metal bunkie board would provide more support and keep the mattress healthier for longer. After reading the reviews on this ZINUS metal bunkie board, I ordered it. It took a couple of days longer than I expected to receive it but it was during the holiday madness. Arrived in 1 long, flat box. All the pieces were there. Instructions were clear, and it was SO quick and easy to assemble! Everything clicked into place and nothing was defective or the wrong size etc. It fit well in the queen platform bed frame. There was maybe an inch or less of space between the bunkie board and edge of the platform, but it did not slide around. The mattress fit exactly in the platform frame so it did not slide around on the bunkie board so I did not have to use the adhesive on some of the slats that were supposed to hold the mattress in place. All in all, it was a great product that was very easy for 1 person to assemble, and it did exactly what it was supposed to do for a GREAT price! I have no complaints.

This was one of the best purchases that I have ever made on Amazon. I had wooden bed slats that were constantly slipping off and so I would have to pull them back to be on top of the metal ridge supporting them. Making things worse is that I have a bedjet powerlayer adjustable bed frame on top, so that was no easy feat. But this bunkie board totally solved my problems here. Assembly was super simple and the rubberized connections make the bed super quiet. It feels very supportive. The hardest thing to do was to lift off and on my powerlayer but that that is no fault of the bunkie board. The only caution I have is to make sure your ridge or whatever this will sit is wide enough and your measurements are correct. The board just sits flush on the inner edges of the ridges in my case but it’s important to that the right width here. Anyway the quality and durability of this board seems outstanding after months of use. I would recommend this 100% for anyone needing slat replacement or wanting a more solid foundation to a frame.

I have one of those fabric bed frames with fabric headboard. Its really beautiful. However the boarder frame on the inside that goes around the inside of the bed where u put the slats down is wood. I've had 2 of these bed frame beds and both had wood slats. One came with a ton of slats and the other came with only 4. The wood slats broke on the first bed, they arent very good for these beds in my opinion. Not strong and sturdy wood slats at all. But my point is this product is a perfect solution. I ended up throwing out the frame on the bed that broke because where the breaks were it couldnt be salvaged. I didnt want that to happen with bed number 2. I put the frame together and the 4 weak slats. Then this product came to mind. My first bed was a regular mattress and I guess the wood slats replace box spring so I didnt have box spring. The mattress was older and everyone in my house had a memory foam mattress so I finally upgraded. I have a queen frame and queen mattress. Not only was I worried these weak wood slats wood break again but my mattress was sinking between the slats. Everything felt like a horrible nightmare bedtime wise. This product saved me. It was completely simple and quick to put together. You simply attach each side together to form the rectangle board frame. All hardware and tools are included. Only took a few minutes to do. Then you just snap all the slats in. The just push down into all the little openings, you dont even have to mess with twisting and turning more screws. I hate putting furniture together but this was a simple fast easy breeze. I laid this board right over the wood slats and it damn near was a perfect fit. The length is perfect fit for a queen bed. I gave 4 stars and would have gave 5 stars but I found one issue. Now this holds my mattress up where its supposed to be, no more sinking and unevenness. The bed supports it well, everything is strong and sturdy. 4 stars instead of 5 is due to the width. Its a little short but not by much at all. I couldnt find anything with a tad bit bigger width that I needed and all descriptions with these measurements said its for the average standard size queen so I just took my chances. Its still enough for me to love it and keep it but if I had to guess I'd say it could be about a centimeter to a half inch longer in width and it would have fit right in snuggly. This is why I had to lay it over the wood slates or one side wouldnt sit up properly on the wood boarder on the inside frame. It was either the description or other reviews that said laying it over the current frame/slats was fine and it is. Hope this info helps. I'd buy again if another bed in the house has issues with the wood slats again

I bought a brand new Ikea bed when I moved, as well as a new mattress (from mattress firm). Immediately after getting the mattress on the bed frame (was fine on the floor) I started to notice that I was having a lot of fitful sleep & back pain. The Ikea slats are two lines of slats that are bowed upwards, creating a divot in the middle of the frame, which according to reddit has ruined people's mattresses over time. I went back to get their more expensive slats & immediately put it back in the box to return when I saw the slats were ALSO BOWED! I turned to Amazon and their trusty reviews to find this metal box spring replacement & it did not disappoint! It was SO EASY to put together. The only issue, which was listed in prev reviews, is that it slides a bit in the bed (longwise from head to toe of frame). BUT, a trusty reviewer stated that they just used some of the packing material foam bricks to shove in the space at the foot of the bed to keep it still & honesty, it was a perfect fit! I would highly suggest to get this frame & just use the packaging to fill in the little inch or so space to keep it from moving. My back is already happier & this was cheaper than the expensive Ikea slats that still don't work. If you're waiting for a sign to fix your crappy Ikea slats without having to get rid of the pretty frame, GET THIS!

This was incredibly easy to put together. I’d say it took about 5 minutes. Not only that, it comes with two different allen wrench tools, one of them a ratcheting device. SO nice! It fit my queen size bed frame perfectly. It’s got lots of slats to distribute the weight to, so that’s great. I instantly noticed that the bed felt more stable, sturdy, and less squeaky. I highly recommend it.

Super product, easy to put together, just exactly what we were looking for. Even supplied the right tools for easiest assembly. Ten minutes later it’s on the bed making it perfectly level. Great job. Thanks.

I have an antique brass bed that belonged to my grandmother for most of her life. It is very dear to me. But we had to modify the underside of the bed due to the flat side support bars the bed rests on. Without the box springs, the mattress would fall through. but with the box springs lifted the bed high, so I needed a step stool to get into bed. The process of climbing into bed threw my hips and back out of alignment. Finally after several nights of severe pain, I ordered the bunkie board. As I unboxed the frame, I laid out the sides and the supports across the bed and told myself it would be too short. But I decided to put it together and see what happened. IT WORKED! It is so easy to assemble and It fit inside my frame perfectly. I did have concerns because of the flat side bars in several places that the frame would slip. I finally decided to the bunkie frame to the side frame using painters tape, then I covered the painters tape with two layers of Gator Duct tape. From experience, I learned that this technique with tape is easy to remove with no sticky residue to remove.. The gator tape is very strong so I am confident I will never end with my bed tipping sideways in the middle of the night. Once of that is enough for a lifetime. Overall this is a great product at a great price. Also, if a person is concerned about whether this will fit or not, it is covered. If it doesn't fit, just let them know, re-box it, and print out the label. There would be free shipping if it was a certain size but it doesn't fit the bed it is specified for. I see some reviews that complained they could not return it, but it is. Read the specifics on the right side of the add.

The wooden slat supports in my current bed frame had crumbled and broke, no longer allowing my slats to fit in correctly to support my mattress. This bunkie board solved the issue completely, fit my queen size frame like a glove and now my mattress lays on top so nicely. I have never been so excited to sleep lol the sticky strips on the top and bottom are helpful to prevent the mattress from sliding off. The hardware is so beautifully packaged and the assembly is quick and simple. One person can easily complete on their own. We only had one issue with the one bolt not threading on the middle post, however with 3 screws it’s secure and very tight so it’s a minor factory flaw. Not worth complaining much about, hence the 4 stars instead of 5. However the factory flaw, we do highly recommend! Very durable and of high quality, the cost seems high for metal, but I am very impressed!

I am a very handsome big bear. I purchased a bed from one of those places where you have 1000 parts that you have to put together by following crappy instructions. The trouble with these companies is that they use cheap pine boards to make up the slats and supports for the bed. I knew that after time these would start to dry out and crack as there are so many knots in the cheap wood that it is bound to fail. I called the store to complain about it, but they just told me I could buy replacement slats which were, well, pine board. After weeks of searching bed companies online, I found this SPECTACULAR product. I measured carefully and figured this would fit into the bed frame making it a much stronger support. So I ordered it in QUEEN and waited. The package arrived and EVERYTHING was inside, packaged so amazingly well. And get this, unlike those other stores that give you EXACTLY the amount of parts you need, these people give you extra of the screws as well as the plastic wedge holders that hold the slats in. Only a caring company would bother to give you free extra parts saving you a trip back to the store, lining up for and hour only to get ONE part to complete the project. I mean look at the instructions: COLOURED and CLEARLY LABELLED! These instructions made it so easy to put the frame together step by step. And look what else they included. In addition to the standard Allen Key they send, they also put in this RATCHET which is FABULOUS! No more banging my hands against the wood when the screw is in a tight place. And you get to KEEP it. Every bed is different based on whether or not there are enough boards along the sides to sit this on. My bed had wood along the side pieces which was a bit wider than the frame itself. I used sheets of thin styrofoam on both sides of the frame to center it to the bed. If you don't have styrofoam, small wedges will work. My bed does not have any wood supports on the headboard or the foot board. This concerned me as that meant only the sides were supported. I went and purchased some L brackets to support the head and food board along that axis. You'll see them in my pictures. Now, if you are a big person like me, expecting this to withhold a lot of weight particularly in the middle if you don't put in some kind of support underneath is going to end up disappointing you. The pine boards had two "feet" that connected the middle beam to the floor. If you are smart, you will also pick up some adjustable feet that you can put under the middle beam for support. I used the old wood as a spacer to make sure the pressure was along the spine. THIS FRAME IS PERFECT. Now my mattress is secure, I can move around in the bed without worrying about the Gods of Pine forsaking me and sending me to the floor. I seriously cannot think of a better solution to BEAR-ifying my bed! GREAT COMPANY. GREAT PRODUCT. I am a verified buyer. You can tell them Daddy Bear sent you!!!!!

I bought this to turn my standard bed frame into a low profile bed and it is perfect. It was super easy to put together and it fits the frame perfectly. It is supportive for my new mattress and works great. I have no complaints at this time. It feels solid and it doesn't slide around like people say it does, but it does make the mattress easy to move if needed to. I didn't use the sticker things, because the mattress doesn't need to be stuck in place. I highly recommend it for anybody who wants to do something like that or just wants bed slats. Excellent product and excellent quality. I put it together myself in no time at all.

Solid, easy to build. Would give this 5 stars but some small design issues. The sides are about 1 or 2 inches too short to fit in the bedframe perfectly (with a small gap of course). It does not fall off my standard metal bed frame, but if you have frame with lip that is tad short it could fall off. I used pieces of the foam packaging it came with to wedge in the gap so it won't slide around even an inch. The other issue is the gap between the rails will leave pretty sizable dents in your foam mattress on the bottom side. A tight cloth cover really should be added with this frame to stop this from happening. As such you could use pieces of cardboard or some thin plywood to cover the frame to avoid any uneven wear to the underside of the mattress. Once the mattress is on there is no movement to the base or sounds of squeaky metal. It comes with some sticky tape to help stop your mattress from sliding, but honestly you will likely need to buy some mattress stoppers or a foam anti-slide topper because there is zero friction so the mattress easily shifts off the frame each night.

I got this bed support to substitute for a boxspring for my son's bed after he grew out of his loft bed frame. This is a great solution since we already had a metal bed frame and a mattress but nothing to support it- this was far more affordable than buying a new boxspring or a whole new bed frame. The package arrived very quickly and was delivered right to my apartment door! My son and I put it together in just a couple of minutes and it worked out just perfectly! It seems very strong and sturdy. I'm going to use a couple of zip-ties just to secure it to the metal bed frame so that it doesn't shift around at all but even without them it doesn't really seem to be a problem so far. My son is happy and so am I! I would definitely recommend this item!