17005 2-Piece Stainless Steel Pry Bar Scraper Set

Awesome little pry bars. Well made and solid. Nice sharp edges. Thin but still very sturdy. Excellent for removing trim, door and window casing for replacement, without damaging surrounding materials. More effective for delicate work not demolition.

Great tool! I had 17 door frames to replace the molding on. This tool made removing the old molding much easier. I highly recommend.

Thin, strong, sharp. Great as a set, as one can be used as a base to pry against to prevent marring the surface. Perfect for trim removal and cleanup. Turns out that the variety of sizes is very helpful.

I am a carpenter and cabinet maker and these bars are the best!!! AND better than all other similarly shaped pry-bars for a number of reasons: *They are thinner than other brands but just as rigid so they give you the prying power but are capable of getting in as tight a spot as any pry bar (which is the REASON you buy this kind of bar anyway so why are any of the others in this vein so fat??) Please remember all pry-bars that are flat pieces of metal are meant to pry in such a way that you rock on the small head from side to side not back and forth in a motion that would bend the bar open although these pry-bars resist bending very well. *There are two sizes which is good for different tasks but can also give you the flexibility to keep one for the dirty jobs that can get covered in crud (like paint and caulk and toilet wax) and keep one for the more surgical jobs AND it is 10 bucks for two, at least right now--Are you kidding me?!?!?! *They absolutely DO NOT RUST, so they will never rust up and leave marks on work pieces or walls. I have a pair I bought 5 years ago that looks just as shiny and new as they were when I first bought them (barring scratches) and they have lived in my truck the entire time. * I do a fair bit of tiling and these are great for getting in grout joints and raising the tile up to plane it or to pull it off (most trowels bend under the pressure if you use the cheaper ones which I like because they are smaller and actually fit into a bucket!). They are also great at the end of the day when cleaning grout/thinset off tools or bucket!

This Titan tool is good quality and well made. The sides are quite square where most others of this sort have a nice feeling chamfer to them. The long pry end has about a 5/128" flat on the end of it where the main body is ~3/32" thick. The scraper on the short pry end comes with a cover and is well sharpened to a knife-edge. The short pry angle is about 85°. I compared this with four other brands of these 9" pry tools. Of the three stainless tools, ("Grip" and Weichuan were the other two), this one has an acceptable finished and sports a very sharp scraping edge for $1 more than the Grip. Of these, I would take the Grip tool and sharpen the scraper edge myself if that was important as it's a beautiful piece and feels great to hold and work with. The best deal, however, was definitely on a pair of stainless pry tools from Weichuan that were quite nice, same steel quality at half the price, and perhaps a slightly better finish than this Titan tool, although an inconsistent angle on the pry end between the pair of Weichuan tools. There were two other non-stainless brands and the strongest and thickest of all the tools was from Bates and is the one I kept after reviewing them all. The final tool I looked at was from Spec Ops with a poor finish and equivalent strength to the others. It looked really nice and was well packaged, but not a serious contender in this group of $10ish pry tools - it was the only one in the group that I would recommend not buying - the others are all solid purchases, depending on what's important to you.

Haven't had a chance to use this small prybar/scraper, but from how care has been taken to make & finish it, this looks to be a solid "performer". If you need a prybar for small tasks, this will likely suit your needs. The stainless also makes this a " looker" too. I did have to spend almost 5-7 minutes scraping off the warning sticker that was placed at the flat blade edge when they could have put it in the grip where it wouldn't obstruct use.

The tool I’ve been looking for. Easily remove misaligned trim pieces without marring surfaces. Great little tool.

I've used this same flat bar for years. It is tough and super hard stainless. The last one I had lasted for years before it snapped. I would buy again. Worth the money.

Buon materiale , se lo usi bene ti dura nel tempo

Très utile dans plein de situations, légère et plus costaude qu’elle en a l’air. Je recommande en plus sa taille compacte la rend facilement transportable.

For the size, this is a very sturdy little tool. Very sharp edges (ideally need covering caps so they don’t damage something) that have proved to be useful, and with the gauge of steel used it doesn’t flex. Recommended addition to toolkit or edc.

Herramienta imprescindible en cualquier caja de herramientas. Calidad superior. Varios usos en uno: Palanca, rasqueta y extracción de clavos.

Brilliant quality set of pry bars. Every size you'll ever need. Easy to use. Very durable. Highly recommended