Fix A Floor Extra Strength Floor Tile Adhesive & Micro Precision Kit – Vinyl Floor Adhesive for Hollow Spots, Laminate, Creaking Wood & More – Versatile Injector Solution, 300ml Tube

Happy to give 5 stars as product has worked perfectly and I have no loose tiles or crunchy sounds underneath after use. I had a phenomenon called tile tenting happen and it fixed it for us. But I will say and warn others that it doesn’t work like in the videos where you squeeze into one hole and it comes up another when filled - this didn’t happen so you need to work out your own system like I did. The solution is incredibly runny (although it needs to be to recess under damaged tiles) but as it takes a while to sink into the holes I drilled, its very easy to over fill them and make a mess until I got into a rhythm. I found it best to work on a section of holes at a time and slowly release the fix-a-floor into the first hole and as soon as it fills up release the pressure on your cork gun and quickly aim the nozzle into a nearby hole as it will drip solution after releasing the trigger on the gun. Squirt, fill, release, aim nozzle into next hole, squeeze, release and next hole and repeat. After a while I got pretty good at it and hardly had any excess mess. Another tip, whilst in periods of rest (waiting for glue to recess) is to lay the gun and aim the nozzle over a hole so if it drips it doesn’t get wasted. I did find some of the holes wouldn’t fill up and not take much solution whereas others were like endless pits so use these ones to catch the excess drips. I also carefully stood / put pressure on the tiles to help the solution squish under them and I could see the air bubbles form in the glue holes and then I could add more solution. Wipe any spills away with a wet sponge and make sure to leave for 24h. I also weighted the tiles with dumbbells. The process is slow and repetitive but works if you follow the steps I did. Have read others say it doesn’t work and is glorified PVA glue but it sets really solid and has to be runny to work correctly.

I bought this after employing a rogue trader to lay a parquet floor for me. His professional workmanship has left us with loads of hollow spots and planks that move. I tried this in one section and it seems to have done the job. Unfortunately the contents emptied all over my floor. The rear cap ended up coming out and I lost the majority of the contents. Ordered three more tubes to get the job done. I would definitely recommend this product.

I was a bit dubious about how much success I would have with this product, but I was pleasantly surprised at how good it was. I had to remove most of the grout and so a couple of tiles became loose and I had to remove them. No problem though. I just poured some of the adhesive onto the floor and pressed the tiles back into place. Having placed heavy objects onto the tiles afterwards and waited 24 hours they both were nice and secure. I re-grouted the tiles and now there is no movement at all. I wish all DIY jobs ended this way! The thin thin nozzle was an inspired addition as not all the gaps between the tiles were uniform, so I did use this for some of the tiles. The solution is very runny so make sure you hold it vertically when not in use. The plastic cap was also very useful when using the plastic end. A great product and I would definitely recommend. It saved me a lot of time and hassle.

Good product but tube is has lick all around. Buy some adhesive cheaper from poundland and makes same job.

I had some wonky floor tiles at out holiday home in France, and rather than pay to have them dug up and replaced, I did it myself with this adhesive. I was assured it would not work, but it did, absolutely fantastic product. You need to drill holes with 2mm drill and squirt the stuff underneath the tiles!

Special nozzle included but you will need some small diamond drills to make holes in the grout for the adhesive to enter. The adhesive is very thin requiring gentle pressure on the gun to prevent adhesive passing the bung seal in the tube

I bought the Fix A Floor Extra Strength Floor Tile Adhesive & Micro Precision Kit to repair some loose vinyl floor tile. The kit itself is very easy to use. The instructions are clear — you simply drill a small hole into the grout line and inject the adhesive using the precision applicator. The process is straightforward and doesn’t require removing the tile, which is a big plus. However, in my case, the floor didn’t fully bond back down after the injection. Although the adhesive went in smoothly, the tiles still felt loose afterwards. That was disappointing and the main reason for the 3-star rating. Overall, it’s simple and convenient to apply, but the final result may depend on the specific floor condition.

Purchased this produced as our tiled kitchen floor started having some movement in it under certain tiles, one of them was making quite the creak when walking on it and we were concerned it would crack. We bought this to try and needed the add on needle due to the size of our grouting spacing. Once in the floor the and set the product is brilliant! All our creaks and wobbles have totally gone away and we will be doing another round on a few we have missed - the only issue is, it's messy, very messy so have lots of rags / tissues and a big bucket of water and go VERY VERY slow, no real pressure should be put on or you will find the product all leaks out the bottom of the tube. I bought a decent gun as recommended and on my first try it still all leaked out and I didn't exactly squeeze hard, so the second time I just gently pulled for a second then let go then again, over and over taking breaks after each one second gentle pull. Full bucket of water sat on the tile for 24 hours was enough to set it.

Ho comprato questo prodotto perché ho delle piastrelle che suonano vuoto e si muovono leggermente. A causa di questo movimento, tra alcune piastrelle lo stucco è mancante, ho comunque seguito le istruzioni facendo un foro nella fuga con il trapano ma, dopo circa 1 1/2 ero riuscito a iniettare pochissimo prodotto e la maggiorparte era fuoriuscito dalla parte anteriore filetto/penta e dal pistone/pistone. Ho consumato anche parecchia carta per tamponare tutto il prodotto che gocciolava dall'erogare anche se imprimevo pressione con la pistola. Farò un ulteriore prova nei prossimi giorni ma, credo che procederò alla restituzione del prodotto che non mi sembra adatto per questo tipo di applicazione.

Instalé suelo LVT en cocina, salón y baño porque me aseguraron que resistía la humedad y no se rayaba. Eso es cierto, pero al año las juntas de la cocina empezaron a levantarse y, con el uso, algunas incluso se rompieron. El problema se agravaba porque debajo había baldosas de barro mal niveladas, aunque me habían asegurado que no pasaba nada. El instalador no quiso hacerse responsable, así que tuve que buscar una solución por mi cuenta. Probé este producto inyectándolo bajo las lamas y el resultado fue excelente. El método que utilizo es sencillo pero requiere paciencia: hago un agujerito con taladro (del tamaño de la aguja del cartucho) en cada esquina de la junta levantada, aspiro polvo y virutas, y aplico lentamente tres pulsaciones de pistola en cada agujero (unos 10 ml por pulsación). Como el producto es muy líquido, es importante mantener la pistola siempre hacia arriba, tapar la aguja con el dedo al moverla y sacar la aguja despacio para evitar fugas. Después tapono con un poco de cera de ortodoncia y celo. El producto se distribuye bajo la junta y entre las lamas colindantes, creando una buena superficie de adhesión. Para que quede perfecto, pongo encima un libro grande que cubra bien la zona y, sobre él, dos garrafas de 5 litros de agua. Así la junta se aplana, el producto rellena huecos y fija incluso pestañas rotas. Lo dejo 4 días secando con peso. Han pasado dos años desde que lo apliqué en la cocina y sigue perfecta. Ahora estoy repitiendo el tratamiento en el salón y el baño, porque aunque el suelo allí estaba mejor nivelado (cemento), también están levantando algunas juntas y noto que las lamas se comban hacia arriba por los laterales. Una vez fijadas, el suelo queda mucho más estable y duradero. Este producto me parece una maravilla: no es una simple cola blanca, es muy adhesivo y algo elástico, lo que le permite adaptarse a pequeños movimientos de contracción y dilatación. Lo recomiendo totalmente para reparar este tipo de problemas. Eso sí: lo que no recomiendo es el propio suelo. Resiste humedad y arañazos (tengo un border collie que corre y derrapa sin dejar marcas), pero las juntas son un desastre. Con este producto al menos he conseguido salvarlo.