Aclorol USB COB LED Strip Lights Warm White Led TV Backlight 5V 1M 3.28FT 320Leds 3000K CRI85+ COB Flexible Lights with 1M USB Powered for Bedroom Under Cabinet Kitchen DIY Lighting Project

I am thrilled with these Aclorol COB LED Strip Lights (24V, 50FT)! I was looking for a long strip to put up in my bedroom and these were the perfect choice. Continuous Light: My favorite feature is the COB (Chip-on-Board) design. The LEDs are so close together that it truly looks like a continuous, unbroken line of light, not like the obvious dots you get with cheaper options. This gives a much cleaner, professional finish. Color and Brightness: The warm white 3000K color is exactly what I wanted—it's bright but has a cozy, inviting glow. Great Value and Quality: The price is great, making these the best value I've found. The sticky tape holds up great too, which is often a point of failure on other strips. Highly recommend these for anyone wanting high-quality lighting that looks seamless!

These work just fine and easy to install. I am please with the cool light they put off. They put of a nice even light for a much longer distance then I thought they would. I am very pleased with these lights.

I love inexpensive LED strips because they're convenient when you have a small space that doesn't warrant purchasing a $20+ system with dimmer switch and transformer. I used a spare USB 2.0 outlet as well as a USB 2 extension to create a cold white ambient effect for part of the DIY modernization that's in progress for this bathroom. The adhesive works fine, but it tears diagonally around midway so just be cognizant of that. Otherwise: Bright, proper color, works with any generic USB 2.0 outlet, and the continuous light bar look continues throughout the entirety of the illuminated area and you can't see the individual LED spots. That latter concern is not an uncommon phenomenon with inexpensive LED strips. The 3-ft segment was actually a little bit too much for my bathroom ambient light objective, so I actually soldered the scrap piece to another spare USB cable I had somewhere in my house and used (no surprise) a spare USB 2.0 AC outlet - I gave this little table outside in my backyard (in front of the door, to the left of the photo) a cold white ambient glow. So, I was able to add ambient cold white lighting to two things in my house with the purchase of one inexpensive cable!

These started off pretty bright, and very noticeable when I wrapped my cargo bike with it. I'm not sure what output it needs, and I learned that changing portable batteries with different outputs changes the light output as well. It can be dimmer at the end of the strip and brighter at the beginning. Not sure if it can change different colors, but I'm very happy with the daylight white.

Works exactly how it is advertised. Been using for more than a year and its still going strong.

As others have stated : the adhesive tape is not good at all - ESPECIALLY if it is truly 3M brand! As I was attempting to peel off the blue backing, the tape/adhesive stuck to the blue backing and just made a mess .. luckily I had some leftover 3M tape after repairing an old LG TV by replacing the metal LED strips for backlighting. I used that and just held the COB LED strip in place until the tape was secure. For My Project, I initially was going to run the entire 1M/3FT around the U-shaped housing, but decided to cut to fit just the top bar looking down. (See image) Since this item had a 5V USB end, I used that for testing, but when I made this more permanent, I cut that connector off and crimped the wires into a JST connector that fit my board inside the printer. This project cost me less than $10USD vs $35+USD for a much less bright option from the printer manufacturer itself. All-in-all: I'm happy with the COB LED strip, but peeled off the rest of the useless double-sided mounting tape and used my own. (NOTE: I also have leftover SOB LED strip material now for other projects, or models, etc. Very Cost-Worthy item nonetheless!!!)

I've been searching for some LED strips to light up 3d printed lightboxes. These are the best I've been able to find at a reasonable cost. They're bright and easy to use, but the adhesive doesn't stick very well unless you're in the perfect condition, even then it tends to peel off at times. I've been needing to use super strong glue on the adhesive to get them to stay, and this is messy and time-consuming. This may be something that is an individual need, but I would give them a better rating if they had an option for a 90 degree angle at the wire-light meeting spot. I already need to put a harsh bend on these at that joint which makes me hesitant because I don't want to break the connection but I wish they would make a 90 bend version.

I purchased this little light strip for a 3d printed lithopane in a 3d printed frame. It was perfect for a 4.5 x 4.5 square lithopane.

Seit mehreren Monaten im Dauereinsatz, effizient, guter Effekt, gute Klebekraft und leicht verlötbar. COB sind einfach viel besser als SMD-LEDs in diesem Bereich!

Bande à led au top!

Der Aclorol COB LED Streifen überzeugt mit einem sehr gleichmäßigen und hellen Licht ohne sichtbare einzelne LEDs. Das kaltweiße Licht (6000K) ist ideal für Küche, Schrank oder Arbeitsbereiche. Dank USB-Anschluss ist die Nutzung flexibel und einfach, und die selbstklebende Rückseite hält gut auf glatten Oberflächen. Die Verarbeitung wirkt ordentlich und der Streifen lässt sich problemlos anbringen. Ein kleiner Minuspunkt: Die Klebekraft könnte auf manchen Untergründen etwas stärker sein. Insgesamt ein praktisches und vielseitiges LED-Band mit schönem, durchgehendem Licht – empfehlenswert!

Not sticky at all.

This light strip is exactly what I needed. It’s bright, easy to set up, and the light is nice and clear without being harsh. I like that it’s flexible enough to fit wherever I want, and the adhesive holds well. The color is crisp and clear, exactly what I wanted. So far, it seems really durable too - I’ve moved it around a few times, and it’s held up perfectly. It’s simple, reliable, and adds a nice touch of light to my space. Definitely worth getting!