ArmorSuit 2 Pack MilitaryShield Screen Protector Designed for Samsung Galaxy S23 Ultra 5G (6.8 Inch, 2023 Release) Case Friendly HD Clear Film - Made in USA

Update 1 year later: this is hands-down way better than the Samsung one. I finally changed my screen protector because the film slid a little and/or stretched and started blocking my front camera. When I removed the film, I was surprised to find no scratches on my phone. The screen protector itself had no scratches or tears despite being on my phone for over a year! Applying the new one was very easy and forgiving, as long as you don't run out of that spray bottle. They should provide more of it or a way to buy more. A speck of dust got under it during the install. I was able to peel it off spray the area, and remove the dust with my finger. And it looks perfect now! I can think of no other screen protector that is that forgiving during installation, protects your phone, and won't tear or crack. Here's a tip I discovered by accident: after the protector is installed, do something that heats up your phone, like play a video game or do a software update. It will help smooth out any remaining bubbles. I will be buying these for every phone I get. I highly recommend this brand. The tactile feel of the Samsung screen protector is superior. But it is not worth the hassle and cost of changing screen protectors every few months. I changed my rating from 3 stars to 5 stars. Original review: Samsung makes a similar TPU film that I would recommend over this one. This has some benefits but they don't overcome the biggest downside: the Armor Shield film is 1-2 mm narrower on the sides then the Samsung film. I actually confirmed this by putting my old Samsung film over this one, and the difference is obvious. As other reviewers have said, this film does not go over the curve. It actually does slightly, but nowhere near the edge. You can see where it goes over the edge during installation because it has a tendency to lift there until you smooth it out. I suspect Armor Shield wanted fewer complaints about their screen protectors lifting from the stupid curved edge and just avoided the issue entirely by making the screen protector narrower. But this is absolutely not a good way to protect your phone since you do have a stupid curved edge. It's something I would expect from some generic manufacturer, not Armor Shield. Interesting to note, nowhere on the packaging box does it say this is for the Samsung S23 Ultra. There is only a sticker sku label that says it's for the S23 Ultra. I suspect the same protector films are produced for the S23 and S22 line up rather than designing one to specification for the S23 Ultra. Lazy cost cutting. The crazy thing about the Samsung film is that despite coming closer to the case it has never lifted on me and I have used an OtterBox defender pro, OtterBox Commuter case, and currently a ShldAir Active case that has a bevel that is raised over the sides. So there is no reason to make these things narrower. The front camera cutout on this one is narrower than the Samsung film, which sounds better since it is a closer fit but can actually cause problems if you get dust or dirt on the edges or the film slides and the film protector blocks the camera cutout. It's too close for comfort. But mainly, the Armor Shield doesn't protect your edges where you are most likely to get sand (quartz) stuck between your case and screen protector and scratch the screen. Neither will give any kind of drop protection. Screen protectors are meant to protect against scratches to the front screen, while cases protect from fall damage and back glass scratches. The advantage of this one is that it is much easier to put on and very forgiving of problems with the initial installation, as long as you don't run out of the liquid. Which surprisingly, is very easy to do! During my first attempt, a single speck of dust got behind the film and I had to remove it and spray it liberally until I got the dust off. I wore latex gloves during installation, but I suspect as long as you spray your hands you can do this barehanded. I could not do something like that with the Samsung protector, and in fact, I ruined a few of them like that. These stupid films will draw every particle in the vicinity to them. They are lint magnets during installation. The Samsung film also has less resistance when swiping but that may be since I just installed my Armor shield film. I suspect that the oils from my finger will make it smoother over time and there may still be residue from the spray. One big advantage the Armor shield has: There was no crease during installation, fewer bubbles, and they disappeared quicker. The Samsung film looks awful when it goes on, but the film magically smooths itself out over 24-48 hours--as long as you didn't get any dust on the inside during installation. Which is not an easy thing to do. I tried this Armor Shield film out because the Samsung one was backordered but I will be going back to Samsung despite the advantages of this film because of the more precise fit. It's a shame. I really wanted to like this since I've had to replace my Samsung ones every 3-6 months due to tears in the film. Scratches are self healing but a tear in the film will not self repair. Armor Shield has a lifetime warranty which I immediately activated (you have 14 days to do it from the time of purchase) and was looking forward to testing out whether that was legit. I work around construction sites so my films never last. But my screen hasn't gotten a scratch yet. And I am not confident enough to wait and see whether this film will actually protect the screen since I know it for sure doesn't protect the edges. One final note: since TPU protector films are much thinner than glass protectors, the fact that the screen protector does not go over the curve is not noticeable in regular use, so asthetically, it looks fine, but functionally, it is not protecting your phone from scratches. And that's its only job!

I am a big fan of ArmorSuit and their screen protector product line. This is the only brand of screen protector I have used for the past 7 years on my Android devices and I continue to re-order from them each time I upgrade to a new phone. I don't really have another brand to compare them against but have been really satisfied overall. The installation is clear-cut and fast-- you turn off your phone, spray the liquid that's included on your fingertips and on the front and back of the screen protector, apply the adhesive side of the protector to your phone or device and slide it into position (making sure any holes/buttons are left uncovered), then use the included squeegee to smooth out any bubbles or wrinkles. You then leave the device turned off overnight while it dries and typically any remaining bubbles that resisted the squeegee will smooth themselves out by the morning. I like that the company provides video instructions to ensure that the protector is applied correctly the first time. Most newer phones are water resistant but even before with my older Android phone models, the small amount of liquid from the spray solution never damaged my phone which was something I was a little worried about at first. The touch screen works well with the screen protector on (and writing or drawing with the stylus is still smooth). I like that the protector sticks to the sides of the screen and stays down despite the curved edges of the Galaxy Note. One thing that I have found is that if you tend to take your phone case on and off a lot (or possibly even if you don't), the screen protector will eventually start peeling away from the phone on one side and will need to be replaced. Sometimes I've had the protectors last only a few months before needing a replacement but at other points the screen protector has lasted and been in good shape for over a year at a time. Since they are so inexpensive (especially compared to the really pricey ones I've seen at cell phone stores at the mall), I've never minded having to replace them periodically. I was really happy to see that this time two screen protectors came together in one pack so that I could replace mine once without even having to re-order. In the past I've used ArmorSuit's lifetime replacement program to order replacement protectors and have been happy with the customer service which was as promised-- they replaced the cover free of charge but I had to submit an order form and pay a few dollars for shipping. The best part about these screen protectors is that I've (so far) never had my screen crack when it's been dropped with the protector and a phone case on. My last phone was dropped and the screen cracked slightly in two places (before I had had a chance to put an ArmorSuit protector on it)-- I subsequently covered the cracked screen with an ArmorSuit screen protector and that prevented the cracks from EVER spreading over a period of several years until I upgraded to my new phone. I was really impressed since everything I read online said that the cracks in your screen will eventually start to expand no matter what you do! I'm convinced that it was the ArmorSuit screen protector that prevented the cracks from spreading and becoming more of a problem. I highly recommend this product and will continue using them for as long as they make screen protectors that fit my devices!

I just got my new S8 plus phone and decided to add some additional protection to my phone. I decided to also start making customer reviews on this product to help out fellow buyers and make sure that they are happy when buying Amazon products. I will add additional pictures in the description as well. History I do have a S6 Edge and I have the same armor suit protection for almost a year and I can say depending on how you take care of your phone it does pretty well, and so I bought one for the S8 plus because I loved it. Pros and Cons Pros *The price - For the price of the product i believe it is fair as you do get what you paid for. *Installation -It was very easy to install the product. Make sure to follow the guidelines or you can go to www.armorsuit.com and watch the video on installation. honestly I attempted like 4 times putting it on to see if it will still look good after 4 attempts by taking the screen protector off and on and applying the spray that came with it and I can say with confidence that it still look pretty good after letting it dry. *The feel of the protector I love the touch and feel of it, as I was scrolling through the touch screen there was no issues or any lagging everything was smooth, and it did not really feel like there was any protector on my phone. *It is case friendly as I also bought a Unicorn Beetle Pro sup case it really fit well with the case. Cons The reason why I can't give it a 5 star *Fingerprints -After letting it dry, unfortunately it does leave fingerprints on the screen protector. you might need an extra microfiber cloth to bring wherever you go just to wipe them off. * The edges, on the right side where the power button is and at the bottom of the phone, since the screen protector does not really go all the way to the edge of the phone, probably to make it more case friendly, but you could feel the sharp edges whenever you try to swipe from the left to right to get the people edge and such. The bottom as well when I try to swipe it up for the home, back button i could also feel the sharp edges of the screen protector. You have to be aware and be careful to swipe careful as you could peel the screen protector off ( Now this disappeared when I put on my Unicorn Beetle Sup case as the casing did cover the sharp edges which could be a pro but without it would be a bit annoying to feel the sharp screen protect edges.) Verdict Other than the fingerprints being left and the sharp edges of the screen protector, it is a good screen protector. Now for me using it personal I am the type that is very careful with my phone in terms of handling, I don't do any heavy activities with my phone like using it at the gym, taking it for a hike. In my honest opinion I do have that feeling that if you still dropped your phone on a pavement it is still prone to crack, however as I said I am the type of user who is very cautious when bringing my phone out however for me my needs are satisfied because it does protect your phone when it is inside your pocket together with keys and coins and such as you can see with my S6 Edge for about a year it still holds up I am hoping it will still do the same for my S8 Plus and I will give an update in the future on how it holds up. l still would definitely recommend buying this product. For those who read this I would to say thank you for taking your time in reading this and hope you are satisfied with my review.

The ArmorSuit 2 Pack MilitaryShield Anti-Glare Screen Protectors were easy to apply and have worked great so far. I’ve only had them for a couple of weeks, but they’ve done a good job reducing glare and keeping the screen protected without affecting touch sensitivity. A solid option if you want extra protection with less screen reflection.

Getting a good screen protector is tough for a smart phone with a curved screen such as Galaxy S8 plus. After reading many reviews of both tempered glass and film screen protector, I decided to go with film because the film touches all parts of your screen whereas the tempered glass only adheres to the edges and there is an air gap between your screen and the tempered glass that reduces sensitivity and creates an annoying click click sound when tapping the tempered glass down against the screen in the middle. In looking for a good film screen protector, I decided to go with ArmorSuit because of its wet application method (I tried previous dry applications and the dry film always peeled off the curved edges). Things to note: 1) There are different size cuts: a) case friendly version leaves a gap around the edges intentionally, so do not think it was cut too small b) non-case friendly version, this does not work well with a case and have a high chance of bubbling up when touching the case c) sometimes Amazon packers ship out incorrect versions, so you receive Note size for galaxy 8, or galaxy 8 for galaxy 8 plus, or tempered glass (I think ArmorSuit only makes available tempered glass for iPhones), etc..., this is an Amazon issue, they are shipping incorrect items to you and has nothing to do with the quality of the product you are receiving. 2) Application is important. Best to apply in the bathroom. Layout a Bounty sheet on top of toilet to put your phone on. Turn on the vents to suck out dust. Turn on shower with hot water to steam the air for a few minutes, turn off shower afterwards, this will clean the air of dust since moisture pulls dust down to the ground. a) watch the video on how to apply b) there are two modifications I would make to the process i) when squeegeeing, be gentle and light, use finger tips to gently hold the screen protector down on the phone while lightly squeegee the air bubbles out. If you using too much force, the screen will move around and you will scratch the screen protector with the squeegee. Make sure spray the solution generously on the underneath of the screen protector when applying, and on top of the screen protector when squeegeeing. The good part is since this is a wet installation, you are allowed many redos, and you don't have to throw away the film just because you misaligned it on your first try. ii) when pressing down the edges of the screen protector, spend a little more time on this part, don't just slide your finger across the edge to push the film down but use your fingertips to hold the edges in places for 10-15 seconds for each section of the edge. then let dry for 24 hours, seriously you need to let it dry or the edges can become undone since there may still be liquid under the screen that may get forced under the edges if you start using your phone. Unfortunately there is no easy way to apply film screen protectors, and tempered glass screen protectors are easy to apply but have useability issues. If you are looking for a good film screen protector, and take pride in installing it on your phone meticulously, then this screen protector will work for you. After a few days the touch and sliding is smooth and the visibility is crystal clear. And please don't think this will protect your screen if you drop your phone, that is what a case is for. It's all very logical. Finally to add, ArmorSuit customer service is superb. You can contact them thru their website form, very easy, or call them. They are not robots, just tell them if you have any issues, be frank about it and tell exactly what the issue is, and they will do what they can to resolve your issue with sincerity. This is a 5 STAR product and company. Please ignore my 1 star rating as I wanted to help those researching this product. Hope this is useful to someone out there looking for a good screen protector.

UPDATE: I really liked these protectors so when I got a gouge in the latest, I ordered some more. Not at all happy with these. They are a lot thinner material than the previous purchase. I've gone past my 30 day return window or I would return the rest. This product does it's job. Not as fond of the thickness of the film at first because it has a drag to it, but as it wears some it seems have less of a drag. I'm not easy on my phone and drop it often and on gravel face down. It has protected the screen. The film has had cuts and gouges but no damage to the glass underneath. The installation couldn't be any easier and it sticks well. I don't have much problem with touch sensitivity or fingerprint reading. I do have to get my finger a little wet at times for it to read better. No more than usual without the film. The camera lens protector is great! Once again, my phone fell out of my back pocket and onto gravel. It shattered one of the portion of the lens but that's what it's designed to do. It shattered but my phone lens didn't. This is my second purchase of these for my phone. The great thing is that you get two to a box so if one gets a gouge, you can replace it. If not for the initial drag after the fresh install on the screen I would have given 5 stars.

When it comes to using a case with my valuable device, I always look to Armorsuit to provide me with most compatible screen protectors out there. Their case-friendly version is slightly slimmer around the edges, just allowing enough space between the case and the screen so that the screen protector would not be pushed along the edges after a case has been applied. In addition to that, the screen protector is designed to fit the device perfectly! Once it is on, you can't even tell there is a screen protector on the phone. It provides a glass smooth feeling with no bubbles presented. It also reduced a lot of fingerprints and the self-healing feature is excellent. The application was easy, especially after watching the video installation instruction. I recommend installing this product during the night time because it does take some time for the product to fully settle. The company recommends waiting up to 12-24 hours depending on your application process but I found that my screen protector was fully settled after a 6 hrs with a good night of sleep! Here is a general idea of how I personally installed this protector: 1) I cleaned my hands and wiped down my device with the microfiber cloth that was provided in the package. 2) I sprayed the finger tips with the solution spray and then sprayed the solution spray onto the screen protector, NOT the device! 3) I adjusted the screen protector so that it would align perfectly with all of the holes and cut outs 4) I used the squeegee to get rid of any excess solution and bubbles that might have formed during this process 5) I let the protector dry overnight and in the morning I was already using my device with no visible imperfections or bubbles anywhere! It was almost like there was no screen protector there at all. The best part was, now I can apply any case I want over my phone without having to worry about the edges lifting. Thank you Armorsuit, I will definitely be purchasing more of your products in the future.

I should have bought this screen protector for my S8+ in the first place. I have a Blackberry PRIV with a curve screen and I installed an ArmorSuit matt protector. When I got my S8+, I tried a glass screen protector instead. I had gone through 4 of them. The first two was of different brands and both only had adhesive along the edges. These are easy to install and provide a bubble and air gap free viewing area. The issue is that these do not stay on the screen reliably. My first one popped out and cracked when I dropped my phone. My S8+ was not damaged as it had a case and the screen was also fine. As long as my phone screen is protected while the protector is cracked, I do not mind as protector is cheap. So, I went ahead and try another similar one from another manufacturer. The second one lasted longer but it did not stay glued on the screen after a few months. So, I use a little contact cement on the edges and continue to use it. The protector popped a few weeks ago while I was changing phone cases. I could have use contact cement fix again but I notice that the protector is a bit scratched up. That means that these glass protectors are not as hard as they claimed. I order a package of two glass protectors with full adhesive this time. That was a mistake. I spent 2 weeks trying to install the protectors and cracked them both. The problem is that the one I bought does not fit the screen. It looked like it fit but it did not. I could not get the curve edges down. There is no way I could press the edges down long enough to get them glue down. I even put rubber bands on to get the edges down. I placed the phone under a stack of books overnight also. Every day, I remove the rubber bands and the edges were still popping up. However, this condition improved and I managed to get rid of all the air gaps and bubbles other than one corner. I reduced the rubber bands and only placed them where the pressures were needed. I cracked both protectors while working on moving the bubbles out to the edges. I was unable to use my S8+ for 2 weeks, luckily this is my spare phone as I switched to a LG G7. I had no issue in installing a glass protector on the G7 but this S8+ was a nightmare. Quite a few of my phones and tablets have ArmorSuit protectors so, I ordered one. I thought I would be saving time by using a glass protector but no. Compare to the full adhesive curve screen proctor, this film protector is time saving. What was not expected is that there is may be 3 tiny air bubbles on the display even though I cleaned and cleaned the phone before installation. Since the protector was only installed a day ago, these tiny air bubbles might go away in a few more days. These bubbles are quite small and they are small enough that I could not take a good picture of showing them. The important thing is all the edges are glued down. If you have a phone with a curve screen, I would definitely recommend using this ArmorSuit product. All of my phones and tablets that have this film protectors are still on without any issue.

This may be a great product for non-curved devices. Just not this phone. I installed the film on the phone as instructed and with no problems but when the sides dried up they started lifting. I wrapped the phone in saran wrap to keep the sides in place overnight but as soon as I removed the wrap the sides lifted. I cannot be bothered with stuff that just do not work no matter how much hype companies create. I repacked everything and it's going back. My rating does not reflect the quality of the product for other applications, only mine. Two stars for quick and bubble-free installation. If you can make it work on this phone you're laughing!

Muy recomendable.

compared to spigen neoflex, this is far better, before this i have used spigen neoflex, mob-Ac and baseus guards, none of the above is actually perfect with a case, if you are using samsung original case , it is ok but if you are using spigen case etc the chances of pushing the guard is much higher.. note:I have seen my spigen case pushing the guard at some places so i have moved back to my samsung case..

This is really awesome protective Shield . Phone looks way beautiful I would easily recommend anybody for this. My suggestion is close your eye and go for it

This is actually a great screen protector, I bought it quickly after buying my S8+ and although I am becoming a bit of an expert at fitting these things, having bought, and tried many in the last week or two - this one was a little tricky. Perhaps I used too much of the liquid they give you, but I couldn't get the protector to sit still on the screen when I was using the squeegy to get the liquid off. Anyway, eventually I figured it out, and the protector sat nicely, no smudges, bubbles or dust, and there was no loss of sensitivity when using the screen. It was also case friendly for my Spigen Tough Armour case, had no issues with the two being on the phone at the same time. I have to say that in the end I opted to go for a tempered glass cover for my phone, as I am just too clumsy and paranoid to risk it, but if I wanted a screen protector, this would be very high on the list