Eve Motion (Matter) - Smart Motion Sensor with Light Sensor, IPX3 Water Resistance, Automatic Activation of Lights and Devices, Thread

I bought this sensor and really like it. It's fast and reliable over Thread. It allows you to set the hardware timeout that determines how long the sensor stays in the motion state. It also has a light sensor in it, so the user can create automations based on the amount of light in the room. The motion sensor stopped working within 3 days after I bought it. Taking the batteries out and putting them in again fixed the problem, but then after a few days the problem would come back again. I contacted Eve product support and they immediately told me this issue is a known problem and told me how to fix it. After the fix, the sensor has been working great since then. So, I would advise people to contact Eve if their sensor is not working correctly. Also the sensor detects my presence at a distance of about 15 feet with the sensitivity setting set to Medium. Very good product and good product support. The sensor is using Thread as the tranport and not Bluetooth. Very good product and good product support.

The good: It works, sort of. I set it up, and it does detect motion. I used it with Homekit and it connects with it after a couple of tries. I wanted to use it to turn the lights on when I enter a room and off when I leave. The bad: It doesn't continually detect whether you're in the room, so it's not good for what I wanted. it turns the lights on, but it was too difficult for me at least to get it to keep them on until I leave. The best I could do is have it turn on, wait 10 minutes, then turn them off, if it didn't detect me. but it does not detect me if I'm sitting still. So it turns the lights off and then when I move again, it turns them back on, which is annoying. The solution to this is to get a presence sensor, not a motion detector and Aqara sells a presence detector, which I hope will work a lot better. Also bad: I changed the name of the Wi-Fi in our home and had to reprogram this to use the new Wi-Fi and it failed totally. I couldn't get it to work anymore so even though it had good reviews, I definitely would not buy it again. Edit: after several tries, and resets, I got it to pair again, but it failed almost immediately. So even if you're willing to accept it being just a motion detector, Be prepared for it to only work for a few months.

After more than a full day of frustration trying to get a Shelly Motion product to connect (and STAY connected with my network) I gave up and tried this Eve Motion product. Setup was a breeze (after doing a factory-reset on the device) and took less than 5 minutes. Simply scan a QR code on the device from within the Alexa app, and it sets itself up - no additional app or hub needed! Two routines for turning on lights when detected motion and turning off lights after 1 minute of no detected motion are both working well (although turning on is a little sluggish, but that's due to Alexa delay not anything related to the device). This is the product I'll buy when shopping for additional motion sensors.

This motion detector works great and simple to set up with Google Home. We had someone go up onto our porch and steal a cheap wooden bench in the middle of the night so bought this to create a routine that if motion is detected on the porch it will turn on the lights in two different rooms, turn up the volume on one of our home speakers and trigger a 30 second doorbell and barking dog audio file to trigger our dogs to start barking. Then when motion is no longer detected it will turn off the lights. This was super simple to do in the google home app by following the setup to connect it to Google Home. The one thing I believe most people miss is that when setting up you have to ensure the network you are on is 2.4ghz. I did make the initial mistake of forgetting this and the unit would not work. Realizing this, I simply removed it from google home, connected to our 2.4ghz bandwidth and then reset up and once that was done everything was simple to set up and then create a routine for it as mentioned above. One thing that would help users is if they could show what wifi network the unit is connected to in Google Home. I cannot speak to the SmartThings app as I did not want another app install. The detection is pretty good, range was a bit too long for us to point it toward the street as it would trigger when cars passed by about 30-35 feet away, so had to point it toward the house. The cone of detection seems to be about 160-170ish degrees so works for our purpose and we don't get false alarms now from cars or people walking on the street. Overall, this works quite well as intended was super easy to set up. Once realized the 2.4ghz was required, it too a total of about 15-20 mins to connect to Google Home and have routines set up. It does require a hub to connect to, so keep that in mind also if you do not have a Google, SmartThings or other compatible hub already.

I picked up the Eve Motion (Matter) sensor to expand my HomeKit automations, and it has been a great addition so far. Setup was incredibly simple—pairing took only a few seconds, and it immediately showed up in the Home app without any issues. The Matter support makes it feel more future-proof, and it integrates smoothly with the rest of my smart home devices. I mainly use it as a motion-activated light trigger, and it’s been very consistent. The motion detection is responsive, the light sensor adds extra flexibility for daytime vs nighttime automations, and I haven’t had any false triggers. The IPX3 water resistance is also a nice touch if you need to place it in more exposed areas like hallways near an exterior door. One thing I’ve been especially impressed with is the battery life. Even with daily use, the battery has held up really well, and I haven’t had to swap it out yet. At its price, it’s a solid smart home upgrade that “just works,” which is all you can ask for with automation hardware. Bottom line: Easy setup, great HomeKit integration, reliable performance, and strong battery life. I’d definitely buy another.

Habe drei EVE Bewegungsmelder an unterschiedlichen Stellen in Benutzung. Am Hauseingang (Südseite) habe ich bereits 4 x den Sensor getauscht. Ziemlich genau nach 2 Monaten ist der Bewegungsmelder defekt. Die Einheit ist verbunden, der Lichtsensor funktioniert, aber der PIR Sensor ist defekt. Es wird keine Bewegung mehr registriert. Es ist kein Verbindungsproblem oder ein Problem mit meinem Netzwerk sondern ein Hardwaredefekt. Der EVE Support konnte mir nicht weiterhelfen, außer mir den Umtausch zu empfehlen. Kurioserweise funktionieren die anderen beiden Sensoren (Nord- und Ostrichtung) seid 1,5 Jahren einwandfrei. Habe von EVE viele andere Geräte und bin sehr zufrieden. Speziell dieser Bewegungsmelder hat ein Konstuktionsproblem und geht reproduzierbar kaputt.

I bought this at a discount through warehouse deals and am please with its simplicity and effectiveness. Many creative ways exist to use the device to trigger everything from notifications on your phone to various types of automations like turning on light when you enter a room. Security, automations, fun creative uses. We keep ours not anchored anywhere specific and move its location based on use. Is the kid awake, when we aren’t in earshot? Is there movement by the basement windows at night when we aren’t at home? Turn on the light in the laundry room when entered. If there’s no more movement detected for 10m, turn off lights. When the light level is this much (sunrise/morning) turn off lights. The device has a motion sensor and a light level (lux) sensor. Keep in mind many of these automations need other devices to function, smart lights, bridge/hub..

I have this sensor integrated into my HomeKit setup controlling lights I. The main bathroom. It triggers a Lutron dimmee switch to turn on the lights to different levels depending on the time of day or night. The battery lasts forever - I’ve been using it for 6 years and I’ve changed the batteries once. It currently shows 25% battery. It works reliably and quickly.

1st order, received open box item / returned. I got 3 of those. I use them with Home Assistant and the Thread border router from Casa / SkyConnect. While they work fine indoors, outdoors they are a bit finicky and produced a lot of false triggers due to anything emitting infrared (concrete, driveway). Effectivily, if it sits in the sun partially, or fully, it has not worked very well in my installation. I tried multiple setup, and they were not working very well. There was no option with Home Assistant to adjust the sensitivity of motion detection. There are limited options to attach this unit to a wall, or post. The hole at the back only fit #4 screws which is very limiting. I tried using magnets with double sided tape to hold them to a metal surface. Magnets seemed at also cause interference with the unit for both normal use and programming. I am not sure I will buy more of those sensors.

I have these all around the house - they're great, but they do occasionally stop working which is really annoying. Long term not the most reliable