2 Door Sunshade for Ford Bronco,Mesh Sun Shade Bikini Top Cover Bimini Top for Ford Bronco Accessories 2021 2022 2023 2024 2025 2026 2 Door - Blocks UV, Wind, Noise(Flag)

Love this sunshade. It was easy to install and fits great. The bungees attach very tightly so there's no wind flop. It also gives good sun protection and keeps your seats from getting too hot in the sun and burning the back of your legs when you're wearing shorts. I will say that the instructions weren't very clear on where to hook the front corners. So when I originally put it on, it had wrinkles in the corners. I moved where they attached and it smoothed out. But definitely 10/10 recommend!

UPDATE: I was unable to close the soft top with the configuration I installed. The mounting cup placed on the inside bolt where the soft top latches did not allow the pin to fully sit. So I moved the cup to the outside bolt and used the #3 cord in the corner hole of the shade, and used the #2 cord with hook going to where the soft top latch closes. The hook needs to be removed to close the soft top, but not a big deal and actually i can remove it altogether. I test driving on the highway with the #2 cords unattached and there’s no issue at all. See the last pic. I was a little concerned because the pics and video in the description showed 2 front hooks mounting to the hole where the roof pin sits. But there must’ve been an update because now a loop mounts to the round receiver that you put on the outside bolt of the latch area. Installation was easy and I did it with the soft top flipped back in position 1 (rear windows still on). But I had to the the top fully down so I could add PPF over the areas where the large #5 cords lay on the paint. The spots where hooks are used in the front didn’t need PPF because the hooks luckily don’t touch the paint. The pics show how all the mounting is done. I only showed the driver’s side sine the passenger is the same. The second to last pic shows the amount of shade provided. The left side of the pic has direct sun and the right side is thought the mesh. Wind is also reduced during highway driving with the widows closed. Great product and great price! I recommend it.

Good quality. Feels very sturdy and does a great job filtering most of the sunlight also no flapping around at freeway speeds. Lost one star for the 3-4” gap at the front of the cover but kind of anticipated this from the photos and other reviews. 2025 Bronco Badlands

Fits well and easy to install. No troubles at higher speeds but I have a roof rack with a wind fairing. It stays installed with the hardtop on. You simply have to disconnect two small bungies right above the rear view mirror which iterally takes 5 seconds. It's a bungy bimini so its not going to be as robust as some of the higher end options. But it provides outstanding value at the price point for those who don't want to spend $300+. I'll just buy this one again when this one wear out in a few years .

We bought this for our 4 door 2021 Bronco after purchasing a bimini cover that was solid fabric. The mesh design of this one is actually more comfortable to the occupants even though it’s the same color. Heat can’t build up because of the mesh. We live in a very hot area of Texas and this shade cover makes driving around with the top down comfortable even when it’s 100+ degrees. The material is very tough and well made and the securing bungee cords are very strong. I am 74 and have lost grip strength, so getting the bungees around the hardware provided was a challenge. They are VERY tight. I found using a large Phillips screwdriver as a lever to guide the bungees on made that task much, much easier. The installed cover looks great, fits very tight and doesn’t flap even at 70mph. Sure, it’s noisy in the vehicle at speed, but it’s a dang open top sport vehicle….what else would you expect? It doesn’t interfere with the top when it’s put back on, so the shade will stay on all the time.

This sunshade cost me $39.99. I certainly didn’t expect much of it. The installation instructions are not as bad as other reviewers have said. It’s pretty straightforward. One person can easily accomplish the task, but two people will make it easier. Yes, there is about a 3” gap between the end of the sunshade and the bar above the windshield. However, that isn’t an issue for me. It is relatively easy to keep the sunshade installed and put the roof panels on over the sunshade. All you need to do is remove the front four bungee cords. No big deal at all. The sunshade does not have any zippers for securing the panel latches but I am easily able to reach under the sunshade and secure the latches. As for the driving experience; wind noise is actually reduced a bit, there is no flapping of the material, the mesh is not too dark that you can’t appreciate the sunlight, and it helps to keep the leaves from dropping in the vehicle. I am very happy with the product and strongly encourage others to buy it.

The instructions aren’t very clear but i figured it out and had it installed within an hour. It came with plastic caps to install onto the vehicle to wrap the bungee cords too. *see pictures* Those same caps need to be removed when installing your hard top back on. (Idk about a soft top) Overall, strong fit even on the highway. Keeps sun exposure out as much as u think mesh would.

It's pretty straightforward to install, and the included hardware is well thought out. But overall I thought it wasn't worth having it in. If your goal is to get some shade, this does help. But I was hoping for more wind protection for the backseat passengers and I couldn't really notice a difference when it was installed vs without it.