BLCH 3/8" NPT Air Pressure Regulator - Air Regulator for Compressor,Air Compressor Regulator Air Drying System AR3000-03 Gauge 0-160 PSI

Works great for my plasma cutter. Mounted to the wall by my machine with included bracket.Easy to use and priced right.

Appears to be very high quality, however because of the size of the blue knob I couldn't spin the valve on my compressor without taking the valve apart. If you need to do this here are instructions: 1) Unlock the blue knob by lifting gently until you hear a click. Turn blue knob counter clockwise until it stops 2) Remove four philips head screws. 3) carefully lift top half off the valve. There will be a spring, a brass shaft and a rubber diaphram inside. Remove all parts and note how they go together.4) There is an arrow on the bottom of the valve indicating flow direcrion. Attach a bare nipple on that side and and then a quick connect on the other side. You only need to use 4 or so turns on the nipples using teflon tape. 5) thread the assembly onto the compressor, carefull not to over tighten until the gauge hole is facing you (there are gauge holes on both sides of the housing depending if you want the knob facing up or down. A bung is supplied to plug the hole you don't use for the gauge. 6) install the gauge. Don't over tighten. 7) reassemble the valve, tightening screws in a criss cross pattern.

Works as it should!

decent cheap regulator, outside is all metal my last one self destructed because of to much plastic hope to get 2 years out of it, shipping was 1 day,, excellent!

Quality low cost, low pressure regulator for home shop use. Use as pressure testing gas tank pressure regulator for leaks

The regulator on my compressor was leaking. After replacing with this my compressor is back in operation.

Looks good in the box

I was surprised with the quality of this product for the price I paid. I am very satisfied and would recommend this to anyone that needs a nice air regulator.

Worked as it should good product

Needed to update the shop air system. This was perfect.

Bought this to replace the regulator on an air compressor. Had to buy a longer connecting nipple in order for the regulator to clear the tank on installation, but other than that, the new regulator worked great.

The regulator is excellent. The diagram (pictures) showing the input and output ports is wrong. The ports are actually opposite to the picture. Look for the tiny embossed arrow next to the input port (hard to see).

travail tres bien