Spigen EZ Fit [2 Pack] Tempered Glass Screen Protector for iPhone 15 Pro

The Spigen EZ Fit screen protector is excellent and was incredibly easy to install on my iPhone 17 Pro. The alignment tray makes the whole process simple, and the protector went on perfectly with no bubbles or dust trapped underneath. The glass feels smooth and clear, and touch sensitivity is just as responsive as it was without a protector. It also fits really well with the Apple TechWoven case. Once the case is on, the screen protector is barely noticeable at all and looks very clean around the edges. Overall, it feels like part of the phone rather than an added layer. Great quality, easy installation, and definitely worth buying.

The fitting system to get a perfectly aligned screen protector with no bubbles is great, quick watch of a video and fitted in only a few minutes and anyone could do it. I have dropped my phone, onto a sharp cornered and hard object, and the glass sprite tie sis exactly what is was designed for - it cracked the protector, which was easily removed and a new one straight on. This kit is my firstly choice for all our phones.

One hairline crack across a corner is now invisible, even with the screen off. Only the impact point on the very edge is at all visible (because there are multiple fractures in a tiny area, but in normal use I won't notice at all. Usually high quality from Spigen. Very easy if you follow the instructions or video - I watched my son do it for himself. With the tools in the pack you end up with a totally clean original screen and the new layer with zero bubbles (it's so much easier to get rid of bubbles than I expected).

Good value with being a twin pack. Instructions easy to follow, unfortunately I still ended up with some dust under the product despite the screen being spotless at time of application. Not taking it off to waste one protector though! Hopefully keep the screen scratch free that not longer and I’ll hope for a full dust free experience next time.

extremely happy with this screen cover. I had a cover put on my iPhone15 by Apple when I bought the phone which bothered me for ages as the edge of the protector was sharp. When I had to swipe from the bottom my finger grated against the edge of the cover. This is the first time ive used the phone and actually been happy with its screen and edge smoothness..super easy to put on with the frame provided. No nonsense and exact fit .Perfect thank you.

I’ve always been quite skilled at applying screen protectors. I got a new iPhone 16 Plus and used my usual brand (yellow box) with a basic applicator tool. Despite my confidence, I ended up wasting all three protectors in the pack because the bubbles were so bad each time, plus there was room for error with the tool’s positioning and they came out a little wonky. On the third time I accepted the bubbles, and when I looked at my phone a couple of hours later, there was already a huge crack in the protector! No idea how as it was just sat on my MagSafe charger! After a bit of research I decided to go for this brand with the applicator. It’s applied flawlessly. Perfectly positioned, and not a bubble in sight. Well worth the extra cost if you’re particular about bubbles.

I usually get my screen protectors from the Apple Store, but recently Belkin’s system for requesting a replacement has become so clunky. I found myself requesting a replacement almost once a month because they always broke so easily. Spigen has never let me down. Their installation kit is so convenient and easy to use. I’m used to applying these the old school way so this was refreshing! So much easier! I use my iPhone without a case and this screen protector still hasn’t broken, no cracks or chips. Really durable. Obviously the touch screen hasn’t been affected in any way, not in touch or appearance. All in all, a solid purchase. Even if it does break, I’ve got another in the pack I can bang on nice and easy!

Having dropped my iPhone 16 Pro onto my Nord keyboard this morning, I was relieved that the screen protector took the shock of hitting the projecting pitch bend stick and despite breaking quite badly, my iPhone screen was untouched and without a mark. I immediately needed to order a new protector and this Spigen Glas.tR EZ fit seemed a good choice. At £18 it is on the expensive side but you do get 2 protectors, easy application frames, cleaning wipes, dust removal stickers, a squeegee tool and microfibre cloth. Just as well as I ended up having to use both. Following the instructions carefully I thoroughly cleaned my phone screen with the wet wipe included, dried it with the rather small microfibre cloth and ensured there was no dust present. The packing foam around the included squeegee provided a handy spacer pad to accommodate the camera bump when resting the phone on a flat table with the cameras facing down. I immediately pealed off the backing paper of the screen protector inside the applicator frame and lowered it over the phone screen. After applying pressure in the necessary places as indicated and waiting 30 seconds, I lifted off the applicator and peeled off the remaining protector film. Despite my best efforts I ended up with a few small dust specks that create bubbles under the protector. The squeegee wouldn’t fix them so I managed to peel up the protector at the edge and use the dust removal sticker to clean the specks off. Unfortunately in doing that the protector came off and I spent quite some time trying to realign it manually by eye. This resulted in more dust and marks, so I ended up starting again with the second protector. Things went a bit better with the second one, but again dust bubbles! Eventually with patience and more luck I ended up with a perfect fit and no bubbles or trapped dust. However that meant I needed to use both protectors. The end result looks excellent although the protector is quite a bit smaller than the screen so leaves about a 1mm gap of exposed screen glass. That said once a case is fitted it looks ok and should provide full protection. It also ensures the protector isn’t overhanging the bevelled edges of the iPhone glass. It feels very smooth though and you wouldn’t know there was a protector without very close inspection of the edges. Image quality is the same as without the protector. In summary I’m a bit miffed having to use both protectors. Dust and bubbles are still a huge challenge when it comes to screen protectors. The applicator frame helps with alignment but won’t eliminate dust. That said £18 is a small price to pay compared to a replacement iPhone screen.

3 senedir kullanıyorum hala ilk günkü gibi

Spigen’s tempered glass fit for the iPhone 15 Pro is excellent, it doesn’t have any borders which will expand the bezels, and any tight phone casing will not lift the screen protector up. However, this means that there will still be a slight gap for dust to creep in. I have been using their tempered glass for a long while and each pack has 2 pieces. The easy application tray helps cut down the application time. I don’t usually have a problem applying screen protectors myself but this makes it super easy. Squeegee included in packaging helps smooth out all the bubbles. The dust sticker included is also generous. I just use the biggest piece to lift up all the dust particles before application. And best part? Each piece lasts me 2 years before the coating wears off and I need to replace them.

As capas e películas desta marca, são muito confiáveis, por ultimo usei uma capa para meu iphone 14 pro, original da apple, o telefone quebrou a traseira toda. Quando usei a capa da spigen em meu modelo anterior, nunca tive problema, com inumeras quedas, o telefone sempre esteve protegido

I recently purchased the Spigen Tempered Glass Screen Protector for my iPhone 15 Pro Max, and I've been quite pleased with it so far. The installation process was remarkably easy, resulting in a completely bubble-free application. This is a major advantage compared to other screen protectors I've struggled with in the past. One of my main concerns was compatibility with my Otterbox Strada Folio case, but I'm happy to report that it fits perfectly. There's no interference along the edges, and the case closes properly with the screen protector installed. This is crucial since many screen protectors claim to be "case friendly" but still cause issues with more substantial cases like the Otterbox. The glass itself has a premium feel to it. The surface is smooth under my fingers when swiping and typing, maintaining the responsiveness I expect from my iPhone's display. The clarity is excellent as well - I can't detect any reduction in screen brightness or color quality. As for scratch resistance, it's too early to make a definitive judgment. The 9H hardness rating sounds promising, but only time will tell how well it holds up to daily use. For now, I'm enjoying the peace of mind knowing my expensive iPhone screen has this extra layer of protection. The 2-pack provides good value, giving me a backup for the future or in case I make a mistake during installation (which thankfully wasn't an issue thanks to the easy application). Overall, if you're looking for a well-fitting, easy-to-install screen protector for your iPhone 15 Pro Max that works with an Otterbox case, this Spigen option is definitely worth considering.

I’ve used these screen protectors for a few years now and keep coming back because of the straightforward application process. When applying screen protectors you will face two main challenges: 1) alignment & 2) dust & fibres 1) Alignment - Solved These screen protectors come mounted on a jig designed to align with the phone perfectly. The snug fit of the jig ensures that the protector is correctly aligned with the screen (and cutouts, if applicable) “the first time you do it!” 2) Dust & Fibres - partially solved There’s no easy solution to this but the kit includes the pieces that make this challenge easier. Here’s some additional comments on steps to follow to make this a success: 1) remove your phone cover - the jig is designed to fit snugly on the phone and anything else on it will get in the way 2) have a well lit area to work - looking for dust and fibres on the screen isn’t easy BUT good lighting will help 3) turn off fans etc. - small dust and fibre particles will easily blow around. This will reduce the chances of something settling on your screen at the last moment 4) use the provided materials - they are there for a reason 5) check orientation of the jig to the phone - make sure the indications on the jig for the top AND the top of your phone are aligned 6) wet wipe - go right to the edges, it’s better to clean a bit further than where the screen connects 7) carefully inspect for dust and use the tape to remove anything you see 8) lift the edge of the protective film so it can be easily removed BUT don’t remove it yet - do another check and tape removal of dust and fibre then remove the protective film and promptly mount 9) keep the sticky surface facing down - harder for the dust to go up! 10) read and follow the directions they provide (they are enough but the above tips should be useful too!) 11) admire your handy work. It is satisfying when it’s done right, so give yourself a pat on the back when you’ve done it well! If you’re going to use a screen protector (I have without fail for years) do it from the very beginning when your screen is still clean and scratch free. Screen protectors are not absolutely necessary on high end phones like the iPhone Pro models which have VERY hard and strong glass BUT glass can get scratched. Less high end models will scratch easier! If resale or a longer life to your phone is important, then I thoroughly recommend using them, and for a few years now, this protector and application method has been my “go-to “ for ease and quality.