Creality 2026 New Upgrade Filament Dryer Box Pro, Space Pi SE with High PTC Efficiency & Precision Sensor for 1KG Spools 45~65℃, 3D Printer Filament Dehydrator for PLA PETG ABS ASA TPU

Pros: 1. No fuss, no issues, it simply does what it says on the tin. Very nice! 2. Heats up very quickly to desired temperature in about 10 minutes. 3. Timer is convenient to prepare filament overnight, though it'd be nice to have settings longer than 24 h. Cons: 1. It only holds one spool, but this might actually be a pro since it's more convenient for managing different types of filament that has different optimal drying temperatures. As of writing the review two of this model is still cheaper than the dual-spool model. 2. The viewing angle of the display is poor. If you put this on a shelf or on the floor, you might have a hard time reading the screen. 3. The fan is a bit noisy. Overall: Cheap and effective, a must have for moisture-sensitive filaments like TPU!

This is a nice dryer that has worked well for me for dozens of spools. I have no reason to think this won't last for a long time. It effectively removes humidity and has improved my print quality for several spools that "should" have already been dry. I do think these are all somewhat overpriced, but this one is on the lower end of the price spectrum, and it works well and is easy to use.

For my filament drying, I mostly use passive drying (silica gel beads desiccants in containers). But I also have this active dryer box for filament like PETG which is less tolerant with moisture than PLA. This dryer works well. I had a situation where printing with PLA led to stringy results. But placing the filament is this dryer and drying for the recommended settings fixed that issue. I do find that the written instructions in the instruction sheet though accurate could use a of a bit step-by-step description as I found myself instead fiddling around with the knob and randomly pressing and turning. Instead of having to refer to the instruction sheet each time, I printed out more clear (I feel) directions on how to use and just taped that onto the dryer box. This solved my frustration level with the dryer as I was contemplating getting one with more intuitive operation (that is no loner needed). Here is what I like and dislike of this filament dryer: Likes: ------ 1. effective at drying 2. allows for use while drying is running 3. affordable Dislikes: ---------- 1. One knob control needs clearer instructions 2. No lock for lid - box cover can open when moved around. I give the Official Filament Dryer Box 2.0 four out of five stars.

This dryer was very easy to set up and use. You just plug it in, push the knob and make the settings listed on the instruction sheet. The dryer was less than 40 bucks and it rescued a 20 dollar spool of TPU.

I bought this to help with the stringy-ness of my prints. It defiantly dries out the filament and works as described. I'd buy another if I had to.

High-quality product with good temperature range good flow provides much better adhesion the brittleness depends on what temperature you set. It’s decent value for money, but it is on the rather expensive side. It looks pretty cool, especially with other reality products though it does not come with a Teflon two which is needed if you want to print with it.

All filament, even fresh out of the bag, has moisture content that's detrimental to print quality. You spent the money for the the printer and filament, get the most out of your investment with a dryer. This is a simple, one bay printer that goes up to 65C for drying PETG and other such filaments. The one knob system is a little quirky. Turn it to select either temperature or duration, press it to enter your selection, turn it to adjust the setting up and down, press again to store. Turn to the other and repeat. There's a hygrometer built in, to keep and eye on it, but its lowest value is 15%. I like to get it down to that and go another couple hours. They give you a reference chart for recommended settings based upon filament. Pro-tip: you need to leave the dryer open a crack so the moisture has somewhere to go. I don't think they really address that anywhere in the papers.

This dryer works great in term of drying Petg filaments to as low as 9 or 10% degrees in humidity in Houston, TX. This is what i like about this dryer. Unfortunately, it's very loud even louder than my Bambu P1S. Sometimes, it's extremely loud that I have to shake the box several times to bring to its normal loudiness. Wish the Creality gives me discount so I can change to ball bearing blower to reduce the noise

Extremely easy to use, though maybe a little effort to get used to the pattern in the input-movements from the dial/button to set temperature and times. I have not been able to get any of my rolls - pla or petg - below 13%, even if running for days, but it does manage to bring even a fairly humid roll down near there in a reasonable handful of hours. A table is provided to set the temperature for various materials - it would be nice if that table had been on a sticker that could be attached to it, but unnecessary once you're familiar with the process enough. Box is also very quiet, compared to the baseline noise of the fans in my printer, and takes up a very small footprint easy to fit anywhere. Can be used while feeding line through a port but I havent' had need to do that, just run it overnight on the material I want to use if the rolls are out and open, or before packing rolls away in vacuum bags for storage.

Funciona bien, he podido rescatar filamento que venía con humedad, se nota el cambio en la calida de impresión despues de procesarlo en la caja. Es recomendable ver la tabla de temperaturas y tiempo para cada material que viene impresa en la hoja. Los únicos contra que he visto hasta ahora es que el manual no viene en español, el orificio por donde sale el filamento no parece muy resistente y que el indicador de humedad en tiempo real no parece que realmente funcione.

Les deja un pequeño porcentaje de humedad pero cumple con su función

Great little dryer box for a hobbyist 3D printer. I bought this to dry some stubborn PETG filament that came out of the package with too much moisture. The filament would not adhere to the print bed and kept stringing badly. After drying for 6+ hours the filament was dry enough to produce incredibly great quality prints - PETG quickly went from my least favorite to favorite filament. The dry box does not read humidity below 15%, and does not heat higher than 65C, so if I am having trouble with my filament I just throw it in for the recommended length of time

En la unidad que recibimos el botón de control no funcionaba bien (no presionaba para seleccionar función) y tuve que sacarlo y hacer una adaptación.