SurmountWay Chainsaw Mill Guide, Portable Vertical Lumber Cutting Guide, Timber Chainsaw Mill Attachment with Cutting Width 2"-6" for Lumber Sawmill Woodworkers and Builders (RED)

I used it with a Husqvarna Rancher 460 chain saw w/24 in bar. The log is hardwood: pecan. I made the planks with this vertical chainsaw mill (you can find how to videos on you tube under "vertical chainsaw mill" I didn't use a ripping chain, might have made for cleaner cuts. My result was the rough cut bar top shown in the last picture. For the price, this is great. If you have to mill a lot of wood - not your best option. Be sure to really tighten the device bracket to the chainsaw bar, the fasteners vibrate loose, then you have to sift through saw dust on the ground to recover them.

I was excited to get this product because of the welded construction. However, there is a major manufacturing defect. The pivot tube is to large for the pivot bolt. This creates a great amount of slop in the pivot which would make consistent straight cuts impossible. The second defect is the saw clamp mechanism. The corners are to big to allow it to pivot, so the saw can only make a limited depth cut. I could have fixed this with a grinder to round off the corners a little. But because of the first issue I mentioned above, it was not worth the effort. If the manufacture would have used a properly sized bolt and pivot tube, I would be telling a different story...

Horrible quality. Threads were buggered up from the start. I guess nobody at quality control was working that day. Being as there is nothing to hold the end of the bar steady, there is some play and you will not get a smooth cut. I did manage to get the job done. It just wasn't as good as I had hoped.

this works great. i did drill holes for the set screws in my chainsaw as have many others in their review but I was already planning on that and it. i was cutting freehand and while i did a pretty good job this has helps immensely. if you want to try to mill some logs this is a great way to get started

Fast delivery, very competitive price. I just started using my chainsaw and bought this accessory to start doing some art work with wood. I am very impressed of how easy is to set up and use (I did not drill any holes in my brand new chainsaw) and it stay steady during the cutting. Photos attached.