MONTECH King 95 PRO Panoramic ATX Mid-Tower PC Case, 6 ARGB Fans, Black

I was having issues with my case so I was in need of a new one. After researching I found that this Montech King 95 Pro seemed to be the best for the price. After getting everything together I found out it was pretty much perfect for me! Pros * Price - While not the cheapest case out there, what you get for the money is pretty unreal. It is seriously feature rich. * Installation and Cable Management - Installation for this case is a breeze, it has a pinned stand off for alignment of the motherboard and plenty of room in the power supply chamber for all your cables. For Cable Management you have 3 Velcro straps going down the center which are plenty long to clean up the cables. It also has cable grommets are on all of the holes around the motherboard section to make everything tidy. * Hard Drive Cage - Even though they are outdated I appreciate the ability to install 2 3.5 inch hard drives as they are still a cheaper way of getting a lot of storage (I still have a couple I use for that). Of note it does block the back of the motherboard for a CPU cooler install so be prepared to remove it if your cooler requires it. * Airflow & Dust - The case comes with 6 fans pre installed (3 120s on the bottom, 1 120 on the back, and 2 140s on the side. While I didn't use them as I preferred my other fans, it is a great value addon. It has a large dust filter on the bottom and the also has filters on the side and top of the case. * Looks - Even though the curved tempered glass on the front is a bit of a gimmick, I must say it looks pretty cool in person. It has a large RGB strip on the front that is nicely defused and the overall builed is very pleasing to look at. * Build Quality - This is a very solid case, I didn't feel any flex at all while installing everything and there were no loose parts I could feel. Whileit does have plastic panels they don't feel cheap and don't really look like plastic. Cons While this case is near perfect I do have a couple gripes/suggestions for a future version. * Bottom Dust Filter - The case is designed so that you remove the filter from the back, which in most cases it makes it more difficult to remove due to the size of the filter. The size needs to be long as it needs to accommodate the 3 fans on the bottom, but it makes it so you would need to physically move the case to get it out. There is a lip on the bottom of the case in the front that is meant to stop the filter that can somewhat prevent you from inserting the filter from the front. I was able to install it from the front, at least with my case by working with it a bit. While reading reviews I've seen that some people have brooken off the lip, so I think the best solution would be for Montech to make this piece movable with screws so that it can be installed from the front or back. * Top Panel - Beware when installing an AIO as with some of the screws it can cause the top panel to not seat in correctly, there must be very little space in between the AIO panel and the panel. I found a set of screws that came with the case that fits the AIO which were lower profile that fixed the issue for me. But if Montech reads this it would be a good idea to add another couple milimeters of space above the AIO plate for better fits. * GPU Sag - This case has no anti sag bracket pre installed, so if you have a larger card prepare for some droopage. Due to the fans below the GPU it can be tricky to find one that works well, so having one built in would definitely be a plus. The solution I used was the Lian Li GB-001 since it stays well hidden since it mounts to to the motherboard stand offs, but would still prefer a built in solution. Overall this is a pretty amazing case and I would recommend for anybody to get!

This case has so many different features I love, it's got the mesh or glass choices for extra air flow. It's got soooo much space for ATX motherboard huge GPU and any other cosmetics youd want to add. Multiple spaces for 360mm rads etc. The hardware came in a labeled plastic case with all screws you could possibly need and some cosmetic items for ease of use like a screwdriver and zip ties, as well as Velcro strips for cable management. I think montech is the best price to performance case option for gamers. The colors are beautiful in the white case and plenty of fans arranged to cool the best way possible in the case. Cleaning will also be very easy with all the extra space in the case ! Perfect case !

Absolutely love this case! Bought it since I'd never built in a fish tank before and after years of not having a gaming tower I wanted to get back in to it. The airflow is great through this case, especially with the mesh front panel placed on and a few extra fans added to pull air through the front. I knew it was gonna be wide since it has to fit the PSU in the back chamber, but I kinda underestimated how wide. In terms of building in this case I have to say it was beyond easy. There are literally less than a handful of screws to open the whole case up. top and front panels are simply friction fit tabs. Side panels have one thumb screw each then just tilt and lift away. The case has pre-attached cable management in the back compartment that works very well. Extra Velcro straps or zip ties wouldn't hurt but you can definitely use what's provided and have zero issues. This was also my first PC Build that I cared how things looked since I hadn't bothered to get a new case since 2004-ish. The preinstalled fans have been great, Montech sells the same ones separately too if you want to keep any new fans you add identical (like on an AIO radiator) to the pre-installed. If you prefer to get your own fans, get the non-"pro" version exact same case sans fans. There is a nice slide in dust filter on the bottom of the case, but it slides out toward the rear instead of the front, so to clean that you may need to pull the case away from the wall if you have it placed the way most people will. My wife and I share a 9 ft long double desk (a little under 4ft wide at each of our spaces with a roughly 16-18 inch wide center piece with shelving) and my tower eats up over half of the center portion of the desk. If you don't have extra space this tower may be too big for you. Double check the measurements and if it'll fit in your space I highly recommend this case.

Absolutely love this case. The build quality is excellent, and installation was way easier than expected. It has great airflow, plenty of room and the finished build looks amazing. Definitely one of the best PC cases I’ve owned and I’d recommend it to anyone building a new setup.

This case was an absolute JOY to build ! This was my first build and the main thing I was worried about was fan placement and connection to the controller plus the cable routing. I picked this case because all of that is done for you. It was so easy to build in and it has a ton of space. Everything feels premium well made. I chose to go with the glass panel instead of the mesh panel for aesthetics. This case is super cool. I have a 4080 super and a AIO for my CPU the case fans barely have to work to keep everything cool. I bought this PC case in 2024 for about 150 bucks and I still think it’s a steel. There’s lots of space and cable ties built into the back to help you rout everything . This is a very well thought out case. I was gonna go with one of the popular YouTuber Lian Li cases but I’m glad I didn’t.

I have been using this case for around 8 months now and it is an excellent deal. Having 6 fans preinstalled and hooked up to the included fan hub is a great convenience to those new to PC building while still getting great cooling for your components. The "fishbowl" design of the case is great for easy installation of parts and showing off the aesthetics of your new build. The built in RGB button with almost 30 different color options is a great perk for those who want RGB but don't want to add any additional software to their PC. It comes with 2 dust filters which helps make cleaning simple and easy and keeps the noise level down because of ample airflow. Be warned, it is a big case so it's fairly heavy and takes up quite a bit of desk space, but it works like a dream and feels like a premium product at an affordable price.

Love it, first time building a pc and this case was my go to for price and size. It’s a nice build and it traps dust very well and thus allows for easy cleaning. It is a fairly large tower but it’s necessary for the correct PSU and GPU. Only thing they cheaped out on is the rgb which is not a huge issue because you can replace those on your own. Fans spin flat, no wobbles. Has wire management capabilities for clean look. And it keeps GPU at 60°C and CPU at most at 80°C Solid choice

Really nice for showing off those pretty PC components. And for the price, considering the Pro version comes loaded with fans, an AMAZING deal. While you can find cheaper cases, for sure, the quality is quite nice here with thick glass and sturdy panels. And after buying fans, most other entry/mid priced cases will often run about what this one costs anyway. I spent a lot of time researching cases before I settled on this one, and came to the conclusion that this is one of the best valued cases on the market. Montech is killing it! I also have one of their mechanical keyboards, and the features, not unlike this case, are really exceptional at the price point. Great company. Great product..love it. There are a couple of "downsides", however subjective - the case is very big. Probably too big to fit on most people's desks, if that's something important to you. Because the glass is so thick, this case is pretty darned heavy. It feels solid, and that very much makes it feel premium. But you probably won't want to lug this thing to a LAN party or anything. That also makes getting to the bottom mesh filter a bit difficult. I actually bought a little stand with wheels to make it a bit easier to get to it. All in all, very stoked on this case!

Great case. The build quality is really nice. Love the fans. Looks beautiful. Lots of room for cable management.

El Montech King 95 Pro no es el típico gabinete de cristal; es un camaleón del rendimiento. Lo que más me ha sorprendido es su capacidad de transformación y el espacio interno. ​Innovación en el flujo de aire ​Lo más increíble es su sistema de bisagra lateral: puedes mover los ventiladores laterales hacia el frente en un instante. Además, si te preocupa el calor en verano, incluye una tapa frontal de rejilla (mesh) que puedes intercambiar por el vidrio frontal. Esto lo convierte en una bestia del flujo de aire si no quieres el look de vitrina todo el tiempo. ​Espacio para componentes masivos ​GPU: Instalé una MSI GeForce RTX 5070 12G Ventus 2X y queda muchísimo espacio libre. Caben perfectamente tarjetas gigantes como una RTX 5090 o 4090 de triple ventilador sin complicaciones. ​Refrigeración Líquida: En la parte superior hay espacio de sobra para un AIO (enfriamiento líquido) de 280mm o 360mm sin que choque con las memorias RAM o la placa base. ​Detalles técnicos y calidad ​Gestión de cables: El compartimento posterior es enorme, con velcros incluidos que facilitan un armado limpio. ​Accesorios: Trae toda la tornillería necesaria y 2 bahías para HDD muy sólidas. ​Importante: El hub de ventiladores y ARGB requiere alimentación SATA. ​Veredicto: Excelente calidad de construcción y diseño inteligente. Si buscas un gabinete que te dure varios años y soporte futuras actualizaciones de hardware pesado, este es el indicado.

Montech king 95 pro, is one of the best cabin out there, 6 fans best to keep up the system cool and running for long section....

The PC case existed , it got everything. vintallation ease of installation, the look. dedicated botten for RGP. toolset and box included and ( MARKED ) simply you will not find better than this. and i built alot.

Overall a good product but arrived missing the 9 screws that hold the motherboard down. Everything else seems fine.