Spigen for Galaxy Z Fold 6 Case, Slim Armor Pro (2024) [Hinge Protection] - Gunmetal

So far this is the best case I've found for the Z Fold 8. It is one piece, good bumper for the front screen, and keeps the phone slim profile while protecting the phone from all angles. It is thr only full case I've used that doesn't make it awkward to use the fingerprint scanner either. Hinge protector is slim against the phone so it doesn't feel bulky either

After trying a few cases and having issues with them (flimsy kickstands, loose fittings, or overly bulky) decided to try this case and absolutely love it though I do have two slight complaints. The case itself feels durable and install was super simple and straight forward. Peel the covers off the sticky mounts and press on the phone with it open. Before install I noted the case resisted flexing before install and either open or closed the linked hinges feel solid and always line up perfectly and just feels great in the hand. I very much like that there is no built in screen protector so you can choose your own. But that leads to the first downside for me. The left side of the front screen case is super thin and just flexes and shifts alot. I am tempted to try and find some super thin adhesive tape to hold it down but without the built in cover it's to be expected. Though would be amazing if that was included. The other issue is the hinge cover. The springs return nicely and it's a very slim cover for dust and dirt but being so thin it does seem warped and doesn't sit very flush with the rest of the case. Pressing on it gently you can see it shift closer and flex slightly. I am not sure if it's a general fitment issue from the thin flexible edge of the front screen case or not. While not a major concern it should be noted. The magnet itself is insanely strong in mine. I have seen others complain but I feel with quality magsafe products it's not an issue. My scosche car mount can hold the phone folded open in portrait view without falling or rotating. My battery pack attaches strongly but the real kicker is the magsafe kickstand. I can not remove it folded flat against the phone the magnets are just too strong. I have to open it and lever it off the back to swap the the car dock. Not a downside in my opinion. Overall it's an amazing case without the gimmicks or niche ideas I have had in others that honestly just complicate the design without adding long term value. Will definitely be choosing spigen again.

TL;DR: I WOULD recommend this to others, with a couple of caveats (adhesive strips, un-helpful install video, difficult install process), such that they go into the purchase fully informed first. But for only about $34 (at the time of purchase), this is a perfectly acceptable case. Make sure you get a screen protector for the outside screen separately, however, as this case doesn’t come with one! Will start with the negatives: For one, nowhere in the original product post did it say anything about adhesive strips needing to be used to hold this case on. Was willing to look past that (and the challenge it could cause with temporarily taking the phone out of the case), but then when trying to remove the little sticker back things on the actual adhesive strips, nearly every single one ripped off, instead of properly peeling. I had to go and get tweezers to try and remove the little backing paper, and even then, even when being extremely careful, the adhesive stickers basically disintegrated. So that was frustrating… If I had known this case requires stickers, I’d not have selected it in the first place. Then, actually putting the case on… it comes with a little QR code to scan, that instead of bringing you to the installation video/steps for the specific phone, model, it brings you to a full library of all of their installation videos, and this one was way down near the bottom (for the Galaxy Z Fold 8). Then, actually getting it on was a real pain… Even watching the video, since it didn’t have any explanation, and was basically a live-action version of IKEAs ‘picture only’ instructions, some very key parts weren’t totally clear. For example, needing to get the phone fully situated in the case on the camera side first, and then the other side wasn’t clear at all in the video, where it instead looked like the man placed his phone open, glass-side down, flat on a table, and then pressed the case on from the back. Trying to do it that way led only to frustration. It makes sense with hindsight why it’s required to seat this phone on one side first, but it would have been nice if the video made it more clear, or if, in the most ideal scenario, there were actual steps listed or printed somewhere. This was more frustrating than it needed to be. Final comment before getting to the positives, is (as seen in attached image), after only one day of use, there’s already a bit of wear and an indent on the back where it was attached to a mag-safe magnet. May not be a big deal, but was a bit surprising to see. Most likely just superficial. Now, onto the positives! Once the case is actually on, the look and feel of this case is great. It does seem like it will do a decent enough job protecting the phone. I especially appreciate the extra care and thought put into the little beveled area (see image) near the volume/etc buttons, that makes it so convenient to open the phone up. Compared to the other case I tried, and some others I’ve seen online, this hinge protector appears slimmer and better designed than most others. Finally, personally, I appreciate that there is more clearance around the charging port. I have a couple of charging/data cords that are a little beefy, and the previous case I tried had no clearance, resulting in the cord not being able to get all the way in, and thus leading to an intermittent connection (at best).

I am giving this case 5 stars because it keeps my phone incredibly secure. The hinge protection works really well and gives me peace of mind when opening and closing the device. Additionally, the MagSafe magnet is very strong and holds my accessories perfectly in place. The only downside is that it makes the phone feel quite bulky, but that is a fair trade-off knowing my phone is fully protected.

Don't recommend for anyone who uses the open mode to play games. Very expensive and because of the design the hinge protector, phone can no longer sit flat on table in tablet mode. Some people like this as it props the phone up a tad for watching a video. The problem with this is if you want your phone to stay still while tapping on screen, it will not. Since there is no way to disable hinge protector, especially while open that does not require you to either completely remove the case (ruining the adhesive strips every time) or ripping the hinge off completely defeating the purpose of a hinge protector in the first place as once it's forcibly removed I doubt it will just pop back on (considering it's held in place with springs that would unwind once removed). This is an enthusiast level price being 75+ USD and some countries complaining of prices due to shipping issues of 200+ in some areas because of availability. That is a lot to spend on a case that offers close to no protection if dropped while screen is open (the bevel on insides is same level as the screen, so realistically it's offering no protection for dropped open devices which is the most likely scenario I drop it in. Realistically, with this case on this phone it becomes worse than my s23 for gaming purposes since the outside screen is smaller, and who buys a MSRP $2k phone for not enjoying games on the larger screen. TLDR; Overpriced cheap Chinese design that uses super glue to hold it on the device (adhesive strips). No forethought went into the design of this case for the device it was made, as the usage of this device is meant to be primarily open for the bigger screen real estate. Avoid this and get an otter box, you'll get a better protecting case, that is bulkier, but will not require you to play games at a third of the size of the device is capable of. If someone had handed me the (2) pieces of the case that locks on phone and asked me how much I thought it cost, I would have said 15-20 bucks, not 70+. I probably wouldn't buy another Spigen case, as this is the second case I bought in the last 3 years for 2 different devices at a high price that burned me. If Spigen would stop firing their engineers (the people that made them a good company in the first place) and outsourcing their manufacturing needs to a cheap Chinese company(ies) (only to slap their own "logo" on the side and call it a day) they might retain some of their somehow loyal customers for a mediocre overprice product. I on the other hand won't get burned a third time, and if you're considering buying spigen, don't. Save 30 bucks and buy an otterbox, as it offers better protection and a better design especially for games. Couldn't be more disappointed in spigen products over the last year or two. Management seems to be making poor decisions to cheap out in cost while cheapening the quality of the product. Some might call that "good marketing" but even a student failing a basic economics course in college can tell you this strategy only pays off in the extreme short run and always leads to bankruptcy. The shame here is spigen used to make amazing cases. Now management destroyed the name.

I've tried 6 different brand cases for the samsung z fold 8 wide. So far this is my favorite. No built in screen protector which is a huge plus. Samsung screens are strong enough to not need them. It has a strong magsafe magnet. Open volume and power button. Comfortable texture. The only problem is see so far is the hinge protector. It's surprisingly weak. Weak spring and the top and bottom bend easy. I'm assuming it'll break soon. Thats my only complaint so far. I'm sticking with it for now. Edit: I took another star off. The hinge protector sucks. Its too thin, flimsy and the bottom corner catches on my pocket when I pull the phone out. The springs are way too weak. It already stopped closing all the way. On to try phone case #7. I'll be returning this one.

Spigen is awesome!!! I've bought Spigen cases for the past four Samsung phones I've had and it's never disappointed. I spent over $50 on z-fold 7 case and it was garbage compared to this one. Quality material, spring loaded hinge unlike others where it's just a plastic hinge, feels great in the hand with awesome beveling for ease of use of the sidebar and ease of button accessibility. Definitely worth more than what I paid great case

The Spigen Fold Seven case is exactly what a foldable phone case should be. The fit is absolutely perfect—snug, precise, and secure without adding unnecessary bulk. It maintains the sleek profile of the phone while still feeling solid and protective in hand. One of the most impressive aspects is how fluid the open-and-close motion is. The phone opens and closes smoothly with zero resistance, binding, or awkward pressure on the hinge. Even better, there is no separation at all between the faceplate and the phone. Once installed, it stays firmly in place and feels like a natural extension of the device rather than an add-on. The case doesn’t flex, shift, or loosen during daily use, and it inspires real confidence when handling a foldable phone—something not all cases manage to do. Spigen clearly put thoughtful engineering into this design, and it shows in everyday usability. If you’re looking for a non-bulky, well-engineered case that protects without interfering with the foldable experience, this one is an easy recommendation. Spigen nailed it.

J’adore cette coque de téléphone. Elle protège très bien mon téléphone. J’ai juste une question : quelle protection d’écran puis-je utiliser avec cette coque pour le Samsung Galaxy Z Fold 6 ?

It is the best case for protection and looks if you don't care about pen or stand BUT EXPENSIVE

Encaja muy bien y el tacto de la bisagra y calidad es muy bueno

Product was easy to install, feels solid and like it will actually protect the device. Adds a lot of much needed grip and thus enhances the phone when opened. Recommend. Price is high though

Ottima. finalmente una cover come si deve. Non facili da trovare per i fold