Screen Protector For Oneplus 11 5G(6.7 Inches),with 2Pcs Flexible TPU Film,1Pc Camera Lens Protector,1Pc Backing Carbon Fiber Film [Fingerprint Reader,Easy to install]

Was a bit nervous about ordering this screen protector. None of the big screen protector brands make them for the OnePlus 11. All I can say is never judge a book by the cover. The screen protector is super easy to apply once you get to grips with the instructions, and it comes with a plastic bracket that slots into the type c port and holds the bottom of the screen protector while you're lining it up correctly. It covers enough of the screen to not notice there's a screen protector applied yet it doesn't cover so much that it would peel off with the use of a phone case. The fingerprint sensor still works flawlessly after application and the front camera has its own cutout so front camera quality won't be affected. The camera protector that was supplied was a bit more tricky, it takes a bit of skill and guesswork to apply it perfectly. I managed to do it just about perfectly. The 2 cameras on the left of the camera area are where the 2 slightly bigger cutouts should go. If you don't place it down perfectly first try, you can easily pick it off and try again as I'm assuming the adhesive takes a few minutes to fully set on the glass. I've never seen a camera lens assembly so big on a phone so the camera protector is a must-have to protect against scratches in your pocket. Update: I've had this product applied to my phone for more than half a year now. The camera protector is stuck down absolutely solid. Once the adhesive has had time to set, there is no way that thing is gonna fall off in your pocket. One thing I must say though, is the edges of the camera protector have gathered dust over time so IPA and cotton swabs are needed to clean up the area and get it looking good again. As for the actual screen protector, I've noticed some people are saying it peels up at the edges with the use of a case. I've never had that happen to me and I've had about 6 cases on my phone since I've owned it. I think just extra care is required to make sure it's aligned absolutely perfect. The use of an adjustable desk lamp can be very helpful in this situation. Also, the screen protector does feel rough for the first few days but it smooths itself through normal use. In the original review, I forgot to mention the carbon fiber skin that's supplied for the back of the phone. Applying that thing requires way too much skill. I tried applying it and could not get it perfectly aligned no matter how many times I peeled it and tried again so I threw it in the bin.

I don't really write reviews and I'm not a paid review or a bot. But I was really impressed with this screen protector. It is very easy to use despite others saying its not. Out of all the tpu film screen protectors I've used, this was by far the easiest to install. I had no bubbles lest 1 that was a spec I didn't manage to pick up. It goes around the edge very well. I've had on a for a week and I haven't had any peeling on corners etc. The main thing I was pleased with was the clarity of the film. Previous tpu films or self healing ones I have used were absolutely awful. They caused distortion on the screen and like lumpy lines. The previous ones also were not smooth to glide the finger. This one really is clear and gliding finger across the screen feels very much like the glass it self. Good for gaming I suppose. Oh well. It's been a week. If it lasts me or fails on me I will try to update. Edit : OK so months on and this is by far the best I've used. I'm an electrician so I have lots of issues with glass protectors scratching and chipping. I have exchanged this on my screen twice now (due to my own fault. Tools and screws in pocket). It's always easy to put on. It leaves no bubbles and most of all it doesn't peel away due to the case. Buy with confidence.

This felt tricky to apply without bubbles, but strangely they disappeared after about an hour! These protectors are great, they self-heal from minor scratches, and even if the edge lifts a little they usually settle down again after a while. They can shift a little, and partially cover the front camera lens but this is easy to fix. Great value for 3x items.

Edit: As feared, the film eventually bubbled badly at the edge. The second one did the same, not even lasting a month. The good news is that this is the first screen protector I've installed that aligned perfectly and had zero bubbles. That would get it five stars, but the film itself has a soft/tacky feel to it which isn't the best. It has also bubbled up on one corner a few times and, although I've been able to stick it down again, I don't know how long I'll be able to do this if the bubbling continues.

This is a great product for my phone screen. It comes with a set of really useful toolkit for installing it. It works very well, allows fingerprint reading, etc. but only one but, it doesn't last long. I have had to replace two already in less than two years. Might just be me and the way I use the phone....

PROTIP: run a hot shower and then fit your protector in the bathroom, the steam will eliminate dust in the air and get you better results 😉 Bought for my OnePlus 11 after the factory one came off and the cheapie ones I bought on eBay didn't stick to the phone's stupid curved edges. It may look like a generic brand but my gf asked me to fit one of these to her phone and I was pleasantly surprised by the quality so got one for my phone. Happy to report I got great results, perfectly aligned without a single bubble or mark. The little usb-plug guide works great and overall quality is really good. Mm, I've changed cases several times and it's stayed perfect. The little microfibre cloths are really nice and the tpu seems very durable. Fingerprint sensor works 100% (I recommend re-registering your prints but it did work fine without doing that). Only downside is the feel of the screen is a bit...rubbery maybe? Just a great quality pack, actually better than oneplus' factory protector.

Ero alla ricerca di una pellicola per il mio Oneplus 11 5G che aderisse in maniera perfetta allo schermo. Purtroppo, con le ultime 3 pellicole di vetro, ho sempre avuto problemi di distaccamento di quest'ultima dagli angoli, e per via di questo la polvere entrava e faceva staccare tutto il resto della pellicola. Con questa pellicola non ho nessunissimo problema di questo tipo. Innanzitutto badate: la pellicola non è in vetro. Grazie a questo, l'applicazione è facilissima (zero bolle) e protegge egregiamente il telefono da graffi ed anche botte. Inoltre, proprio per il fatto che non è in vetro, aderisce perfettamente a tutta la superficie del display, ed una volta messa non si toglie. Il kit è super completo e contiene tutti gli accessori di cui si può sentire il bisogno: c'è un tappetino che si applica per appoggiare il telefono ed evitare che scivoli, c'è un supporto che si inserisce nel connettore type-c del telefono e si usa come allineamento per applicare la pellicola, e c'è anche una sorta di plettro per far aderire alla perfezione la pellicola allo schermo rimuovendo le bolle. Oltre a questo, c'è anche la protezione per la lente tonda della fotocamera, ed anche una pellicola posteriore con trama "fibra di carbonio" trasparente che protegge il retro. Potete andare col sicuro con questo prodotto! PS: per via del fatto che la pellicola non è in vetro ma in TPU, potrebbe far storcere il naso il feeling col dito all'inizio, ma dopo qualche giorno ci si fa l'abitudine ed è quasi piacevole! Ho avuto inoltre un piccolo problema col prodotto ed ho contattato il venditore, il quale ha provveduto a fornirmi un'assistenza incredibile ed inaspettata!

OnePlus kullanıcısı için çok doğru ve kalteli bir ürün

This kid has pretty much everything and it's really good quality it has the foam that you lay your phone on to do the installation it has the guide it has the screen protection guide so that you pop it into your charging port and lay your screen on top of that line the dots and it makes installing the screen protectors so much easier. Has the camera cover and although it covers up the Hasselblad name it protects your cameras incredibly well. I haven't found anything bad or even remotely not useful with this kid cleaning tools are there the tool to remove air bubbles and do a proper install on the screen protectors there everything is there and the video instructions are pretty on point too.

Best oneplus11 screenprotector I ever owned, super thin, no bubbels and almost feels like I Aplied nothing at all.

最高