ENGINEER エンジニア ネジザウルスGT なめたネジ/潰れたネジ/錆びたネジ φ3~9.5mm用 PZ-58 グリーン

インパクトで思いっきり舐めてしまったネジ。以前から気にはなっていたネジザウルス、家の常備工具としてダメ元で購入。全く滑ることなく、あっさりネジが回りました。もっと早く買っておけばよかったと後悔するほどの威力で文句なしの星５です。

一個あれば安心だしこれで必要十分です

何度も助けられた。いいツールです

まだネジには使っていませんが精度が良いので簡単にものを掴めました

用途には非常に便利だが グリップが抜けやすい

頑固なねじさびもがっちり加えて回せます。やはりネジザウルスはとても必要な工具だと思います。

ネジ頭が潰れてが困ったときに重宝。先っぽの形がちょっと違うだけなのに簡単にねじが回せるのが不思議です！

すごすぎる。 固着したM4トラスネジが外せました。 クレ556とか買ったけど意味なくて、これだけで良さそう。 マストバイです。

very nice pliers , high quality and surprisingly not small , which is a plus.

Bin Hobbymechaniker und repariere regelmäßig Autos, Motorräder und vieles mehr. Diese Zange darf mMn in keiner Werkstatt fehlen. Sie ist vielseitig und qualitativ Hochwertig. Ich habe sie schon mehrmals im harten Einsatz (z.B. an einer abgerissenen Schraube angesetzt und noch zusätzlich mit voller Kraft mit einer größeren Knippex zusammengedrückt- sie hat gehalten und hat keine Schäden davongetragem) Sie ist jeden Cent wert! Absolute Kaufempfehlung!

Lätt och smidig

I swear to god the people who made these pliers are MAGICAL WIZARDS. tl;dr: Dremel didn't work? Rubber bands didn't work? Tap extractor didn't work? Before you give up and just drill through the darn screw, possibly screwing up all the material around it, BUY THESE. It will be the best $31 you ever spend. In fact I would have these on hand FIRST and try them before anything else, while you still have an intact screwhead (though it will totally still work on one that is messed up). Long story: I purchased the Sainsmart x Anet A8 printer DIY kit. It came in a super sketchy box from Shenzen. The build quality is a little inconsistent and some of the nuts and bolts are a little tight. This isn't really a problem...until it came to the BUILD PLATE. If you 3d print, you knows that the build plate leveling makes or breaks you. So imagine my abject horror when I discovered that one of the screws for build plate leveling was so tightly stuck in the build plate that my screwdriver had started stripping it. First I tried the rubber band trick. No dice. Then I tried the Dremel with the reinforced fiberglass cutoff wheel, #426. Pro tip for future people in this situation: DO NOT USE THE 426 WHEEL TO CUT A SLOT, IT IS FAR TOO WIDE. The thickness of the cutoff wheel itself combined with the vibration and slippage of the Dremel created a slot that was far too wide for any flat head screwdriver that I owned, and I simply started stripping that too. I kept cutting a deeper and deeper groove until I realized I was simply destroying the screw head. At this point I was ready to cry and give up and detach the whole hot plate assembly so I that I could just drill through the damn thing - but before I did that, I told myself I'd get this little set of pliers ($31, free one-day shipping on Prime to Canada) and give it a try. BOY AM I GLAD I DID. I was afraid the screwhead would simply fall apart under the force of the pliers, but miraculously, this set of pliers is somehow designed to generate enough friction that it was able to grab the screwhead with ease. From the minute you grab and start twisting you'll know whether this is going to work out or not (if even the Nejisaurus won't do it, you're probably actually SOL and should just drill the thing out). You can see from the photo how much of the metal on the plate was literally carved out on to the threads of the screw and how impossible this would have been to remove with a screwdriver. The NEJISAURUS IS MAGIC! (ok really it's friction, but FRICTIONAL MAGIC) Literally shouted for joy. Best $31 I ever spent. So glad to have this in my toolbox now. Also fun fact - neji means "screw" in Japanese. I love these people. Oh my god. <3 FWIW wrt previous reviewers who said the handle was too wide - I am a short female with small hands and I thought this was perfectly fine.

Fantastica pinzetta per svitare viti incastrate o con la testa non più operabile mediante il normale giravite. Personalmente l'ho trovata molto comoda ed utile specialmente in tutti quei casi laddove non è più possibile svitare una vite o bulloncino con un normale utensile in quanto la testa si è rovinata. Ringrazio innanzitutto AMAZON che come al solito è stata fantastica per quanto riguarda i celeri tempi di spedizione, l'imballo e la qualità dei prodotti consegnati. Quante volte capita di usare il cacciavite della misura non corretta o magari di operare su viti corrose o troppo dure in modo che l'usuale cacciavite non ha più la giusta presa sulla testa della vite. Ecco, in tutti questi casi e non solo, questa pinza corre in aiuto del malcapitato rivelandosi un valido ausilio per completare il lavoro. Si tratta di una pinza (meglio dire pinzetta) molto semplice da usare, di robusta costruzione e con la dentellatura studiata per fare presa anche nei casi un po' più difficili. Ha anche una molla che consente una facile apertura durante l'uso. A me è servita in molte occasioni e mi ha dato sempre una grossa mano di aiuto. Dal mio punto di vista ed in base alla mia esperienza, può essere tranquillamente usata in diverse posizioni ed in tantissime occasioni. La marca è una nota marca giapponese sinonimo di qualità, l'impugnatura è ergonomica ed offre, a mio avviso, una buona presa evitando che la pinza scivoli via dalle mani durante l'uso. La dentellatura delle ganasce (tra l'altro fatte di buon acciaio) conferisce un ottima presa sulla testa delle viti e dei bulloni che devono essere rimossi. Nel mio caso ha perfettamente contribuito a soddisfare le mie esigenze. L'ho già usata svariate volte e mi sono sempre trovato bene riuscendo a portare a termine il lavoro senza eccessivi sprechi di tempo. Secondo me è un articolo consigliatissimo.