TMR Magnetic Joystick Replacement Kit for PS4 DualShock Controller,Anti-Drift Electromagnetic Stick Repair Module with Thumbstick Caps, Soldering Required

These are high quality replacements for the original sticks and work perfectly, even with the deadzones in games completely turned down to 0. They should last basically forever too. Definitely worth the price. The replacement stick caps feel a bit low quality, so I just reused the ones that were on the controller to begin with. Don't be intimidated by having to solder these on. Soldering is extremely easy and you can learn how to do it from watching a couple YouTube videos. Desoldering factory solder is a bit trickier, but you could probably go to an electronic repair shop and have them install the new sticks for somewhat cheap if you don't want to figure it out yourself.

This product works very well, I have high hopes that stick drift possibility will be eliminated entirely but only time will tell me that, I will update in a couple of months. As for now there is a trade off that buyers should be aware of and that is that these sticks require you to use the thumb-stick provided, it doesn’t screw on like the factory sticks instead it pushes on directly. It makes me concerned that it will come off during gameplay. This also takes away the ability to swap out the magnet sticks this controller comes with so there is no more stick customization what comes with this pack is what you get. In my opinion this is a fair trade for never getting stick drift again if the advertised feature is to be believed but once again time will tell. As for installation, this is not something that the average Joe should try you need at least basic soldering equipment and knowledge. If you don’t have that take it to a local repair shop and ask about possibly installing these for you. In conclusion so far these sticks are great after recalibration and I will be buying again for more controllers in the future. ( I was not paid to make this review )

Works perfectly! I’ve always bought favor union tmr sticks for the previous controllers I’ve been working on, but I heard from many that Gulikit was the best of the best. Figured I’d drop the money on one just to try it out, and sure enough I see what they mean! The sticks were about as easy to install as the previous ones, but the movement of them feel JUST like ALPS sticks that were in here previously. Calibration was no issue as I just used the Xbox accessories app to fix them right up, and hopped right into my games! The controller now works flawlessly and will never have a drifting problem again!

I had a repair shop install these on my old DualSense, they also calibrated it, and the sticks managed to reach as low as around 3% circularity error. The addition of easily removable thumbsticks makes this a rather compelling product, since you can buy the "King Kong Ring Thumbstick Kit" and have different heights that you can swap to. Most stick replacements don't really offer something similar from what I've seen, so it's quite a nice bonus. While I am happy with the sticks, they're a little too stiff in the lowest input zones. If you're trying to register as little input as possible it's actually quite challenging, which makes me wonder if going with the tension adjustable module GuliKit has instead would have been better. Also, when moving the sticks in a certain position and letting go, it doesn't always return to 0.00, it instead hangs around at 0.01 or 0.02. Max I've observed was 0.02, I've tried to calibrate that away but it doesn't quite go away. This might be very reasonable, or completely unreasonable. I don't quite know, though I'm including it in case this is a deal breaker for anyone, though I have no idea how much of this is tied to how the repair shop installed it or even if they installed it perfectly whether or not you'll get the same experience if the unit to unit variance is high. Either way, not a bad product, just a little too stiff. As for the installation, I most definitely would not recommend trying to install these yourself if you have no experience in doing things similar. I highly recommend just looking towards a nearest repair shop instead.

The sticks themselves work great. They feel smooth and responsive. After initial calibration I can set my deadzones to nearly zero. The install is the only part I didn’t like but it’s not the fault of the manufacturer. It’s purposefully designed by Microsoft to be difficult to remove the stock sticks. If you don’t have a very good soldering iron, solder sucker, and skills, I would highly recommend taking it to a professional. My install almost went south, as I had to bypass some connections since some of the solder pads were destroyed when I removed the old sticks. But if you can someway get these in your controller, I’d highly recommend it.

These thumb-sticks work great! But they are not easy to install at all! This isn’t the products fault! It’s how Sony designed the controller. I would strongly suggest to not attempt this repair unless you have some “helping hands” a good soldering station with proper desoldering tools. A hot air blower may even be a good idea. Took me two days to finish this repair. I have marginal skills and a basic soldering station. But I love these things! They feel great using them and I know that should last. Still better than spending $80 on a controller.

These PS5 thumbstick replacements are amazing. It took me about 3 hours to install because im not a professional solderer. Removing the original thumbsticks was extremely difficult and I ended up just taking pliers to them after removing as much solder as I could. The pliers were able to remove them perfectly. Installing these new thumbsticks was very easy and soldering them was easy as well. Buy yourself a desoldering heat pump and soldering kit with flux and you should have everything you need. I even upgraded the battery to a high capacity one while I had the controller open. My 5 year old controller will probably last another 5 years now! Very pleased!

Quick delivery. Fitted while doing the ABXY click mod. Which I do recommend very pleasing clicks. However one of the joy sticks didnt have a full rotation. I removed and fitted some standards joysticks and was fine. Disappointed as I have been told they was good. Maybe just got a faulty set. Refund in place and may buy again and try one more time or maybe just get hall effect. I also did notice the right joystick was scraping on the front shell which didnt feel very nice.

Joystick s’arrête des fois un peu sur le côté, ce qui me fait quand même avoir du Drift

A la medida para control dualsense edge, funciona excelentemente, otorga mayor precisión. Fácil de instalar y calibrar.

Perfettamente funzionanti! Spedizione veloce!

Perfect