Milwaukee Cordless Rotary Tool, 12.0V

Being a user of a "dremel" tool for many years (non cordless, with extension wand) it was always a great little tool when you needed it, but setting it up and putting it away, especially with the extended cable arm, was always a pain.. Now, to be clear, the extension wand on the corded dremel tool is a real necessity when you have to get into very small or intricate spaces.. . However, for the mainstay of those types of jobs, this M12 battery powered Rotary Tool from Milwaukee does the job, and very conveniently.. . Nice part was mostly all my dremel bits fit with the chuck that came with this. . RPM's are great, and with a cutting head this thing can go the distance for those small, precise rotary tool type jobs. I used it to cut off 1/2" case hardened bolt heads with a thin abrasive wheel. Took some time and patience, but it did a fantastic job (Yah, I mean, abrasive wheel's break or shatter, but easily replaced to keep going). Even with a 4.0 M12 the tool didn't seem to run out of juice (Small motor).. I recently purchased a 6.0 M12 and that lasts even longer.. Also nice that with the square end M12 batteries you can just prop it up on its end when you're not using it. . I expect this to last, as usual, forever with the M series Milwaukee's. . Tip, when you naturally hold it your grip will want to cover the vent holes, just be aware of that and to not plug them up with your hand, tool should function fine and cool itself if you don't cover them.

Very nice

The Milwaukee cordless version make some tasks a lot more convenient. I've had no problem with battery charge length. All the Dremel attachments including the flex pen fit on the Milwaukee. I think Milwaukee makes good tools. I was disappointed in the last Dremel tool as the speed control failed.

Milwaukee fanboi here, and heavily invested in their M18 platform. This is my first tool that is from their M12 platform, and it doesn't disappoint. I purchased the tool-only version of the rotary tool, and I got a package of 2 M12 batteries from Amazon as well. Honestly with the tool and 2 batteries, I only paid slightly higher than I would have paid for the tool-only at my local box store. Since I have a good number of M18 tools, I have the M18 chargers that charge both the M18 and M12 batteries. If this is your first Milwaukee tool, you'll need an M12 battery AND a charger with this tool. The tool did come with a small wrench, so not a completely tool-free chuck, and a few cutting discs, which isn't clear in the product description to my recollection. Nevertheless, I did also purchase a set of Dremel cutting, sanding, and polishing attachments I could also use with the Milwaukee. Attaching and removing the bits is very easy. Simply press the lock button, and use the small wrench to loosen or tighten the chuck to secure or remove the disc holder. Changing discs is similarly easy, as you just unscrew the flathead screw holding the disc to the holder and change it out. The tool is powerful, and is speed-adjustable. The best part though, is that it has an auto-shutoff feature if the motor gets to bogged down or heated. It'll work again in a few seconds, but it's just the tool's way of protecting the longevity of the motor. Besides, you don't want to crank down hard on your material. Just apply a light to medium steady pressure, and let the tool do the work. Great purchase, and I highly recommend it and other Miulwaukee

Don’t know why came without the original box. It looks good and milwaukee quality. I hope that is not refurbish even that it looks new and the description mention it was new. Have to wait for a m12 battery to test the tool because is my first m12 tool and i only have m18. As a milwaukee fan i expected everything including the original box same way a the hardware store but can’t complain because was cheaper than local.

Very well built and easy to use. It’s very quiet too, unless you are using a disk cutter that is out of balance. Then it sounds like a Dremel. I would have preferred the brushless version, but it doesn’t get the 35K RPM. like this one. The chuck is surprisingly easy to tighten without a wrench. The knurled knob makes it easy to get a good grip on it. The good part is that all of you old Dremel bits and accessories will fit it. If you take the battery out, it even fits in the Dremel tool box. I talk a lot about Dremel only because i went through three of them before I got this one. Dremel is the only power tool brand that I have ever had to routinely replace. I have Milwaukee and Makita tools that are so old that i forgot when I bought them, but they still work great.

Quedé encantada con este vestido que compré en SHEIN. La calidad superó mis expectativas. La tela se siente muy buena, suave al tacto y con una caída hermosa que hace que el vestido se vea elegante cuando uno se lo pone. Las costuras están bien hechas y los detalles se ven muy cuidados, no parece para nada un vestido barato. Algo que me gustó mucho fue que el diseño es exactamente igual a las fotos. A veces uno compra en línea con miedo de que no llegue como se ve, pero en este caso llegó tal cual. El color es precioso, el tamaño corresponde bien a la talla y se ajusta muy bonito al cuerpo. También me sorprendió lo cómodo que es. Se puede usar tanto para una salida especial como para un evento más elegante dependiendo de cómo lo combines. La tela no es transparente y tiene buen grosor, lo que da más seguridad al usarlo. Definitivamente volvería a comprar vestidos así. Si alguien está pensando en pedirlo, de verdad lo recomiendo porque la relación calidad-precio es muy buena. Estoy muy satisfecha con mi compra.

It was a day late for shipment, but I was very pleased with the product

No servía para mi

Le produit est conforme à la description et répond bien à mes attentes. La qualité est au rendez-vous et l’utilisation est simple et agréable. Rien à redire pour le moment, c’est un bon rapport qualité-prix. Je recommande.

excelente producto

Was tied between this and a dremel. After doing research and watching videos I learned that this has more power than the dremel and best of all , I can use my Milwaukee m12 batteries with it. Run time is excellent and I use it weekly for little projects. If your on the fence , this is probably the best one you can buy

I do a bit of wood carving and have always used a Dremel corded rotary tool. It's often annoying to find a place to set up a bench, hang the dremel and use the flexible rotary shaft extension. The Milwaukee M12 tool eliminates all the set up time and annoying cables, I can carve just about anywhere on a whim, the cordless aspect and light weight makes it easy to manipulate. Adding a higher mAh M12 (red lithium XC) battery and this tool runs for long periods of time. Highly recommend!