59896341 UPS15-58FC Super Brute Circulator, Red, Small

This was great stuff. Works super. This is my brand for the job.

Put this on my natures comfort outdoor wood stove. Worked well and was easy to install. Good quality built and good reputation. This is my second one.

Installed this pump last July during boiler shutdown. Throughout this winter so far, after several severe cold weather spells, this pump has performed flawlessly. It is very quiet---I only hear water moving in the pipes if I listen carefully!! This pump is Silent with a capital S! We had a conventional pump/assembly and electric motor set-up for 20+ years and those were noisy (at the boiler and throughout the system). Now, all I hear (At the boiler) is a click from the thermostat relay and the burners lighting in the boiler. Wish I knew of these pumps some time ago. Installation was less a headache than I expected. The best part = no more oiling. I used to oil the motor and the bearing assembly in the old setup and spent many moments trying to second guess myself on whether I got it right. I left the old set-up on a shelf in the garage in case I needed it. Now it looks like I can get rid of the old parts. I kept the check valve in the pump when installing and noted the water must stay stationary when the boiler is off because the temp of the pipes at the boiler remain hot. This tiny pump has more than satisfied the heating needs of our home under all conditions thus far (January 16, 2014).

just what I wanted except it didn't come with the gaskets as advertised

I replaced an existing Grundfos pump that went kaputt after 13 years. All the input from community regarding my questions was very helpful. The flange shape was slightly different but the O ring fit both openings that were already plumbed in. I tightened the bolts and no leaks thank goodness The old pump was single speed , the new one 3 speed. I cut the difference and set it to medium. I was able to use the existing power cord and connected easily to the pump’s electrical configuration. Quiet and most importantly instant hot water. I ordered the flange kit, but didn’t need it since It came with new O rings and was able to use the same housing and bolts that were there already. If I even get half the life I got from the last one, I will be very satisfied because the price is right.

Quiet and reliable. Wish it had an integrated bleed valve (maybe they do now, they didn't in 2016). I'd recommend installing a ball valve with bleeder on the inlet side (bleeder facing away from the pump) if using for recirculation, bleeding the system is critical for operation, and has to be done every time my plumbing is drained. Ymmv.

I use this pump to circulate spa water, to and from a hot water heater. I have had my spa for maybe 25 years and this latest Grundfos is perhaps my 3rd one. It is run day and night, 24/7. The pump is absolutely silent, which is amazing based on the amount of water it pumps. The pump draws about 25 watts of electricity continuous, so I don't think it affects my electric bill very much. This is a cast iron pump, so my spa water with the spa chemicals will eventually rust it shut requiring replacement. "Eventually" meaning years in my case. I have experimented with a lot of pumps for various applications, but this pump is by far the best I have found. I suppose I could buy the more expensive stainless version of this pump, but I can live with replacement every few years using cast iron. Remarkable product in my opinion.

Theis pump has three speeds and is a top of line brand. It is very easy to be wired up... user friendly and runs quiet.

The Grundfus Circulating Pump was ordered on a Friday at 5:00 pm and it was delivered (free) to my door the following Monday at 9:00 am. It appears the unit was shipped from Mississauga, ON vs. the Seller location in Victoria, BC. The Amazon pricing was very favourable compared to local bricks & mortar vendors. Packaging at the Amazon Distribution Centre was adequate but not outstanding... Grundfos documentation states: "Take care to ensure the pump is NOT dropped or mishandled; dropping will damage the pump". Clearly written & illustrated instructions are included together with a pair of new rubber gaskets. The replacement pump was virtually identical to the original 18 year-old unit with worn out bearings. Installation was straight forward and took less than 5 minutes (excluding preparation & clean-up). I'm disappointed Grundfos does not design these units to be refurbished with new bearings & seals but recommends "Disposal in an environmentally sound way". Overall, a very good experience and highly recommended.

Installed in the circulation line for our underfloor garage heating system. At first it squealed quite a bit and it didnt seem to be moving any fluid at all. I uninstalled it and removed the white plastic backblow valve on the output side of the pump, then primed the pump from the output side but filling the line with fluid and reconnecting it. After that the pump was nearly silent and we could see the fluid moving very quickly through the lines. If this pump is operating properly you shouldn't hear much noise, its a barely noticeable hum.

Installed in a hydronic heating application to replace a 10 year old pump that developed a leak. Corrosion and pinhole leaks can be an issue with these pumps. The three speed switch for this model makes it suitable for a variety of applications with different head requirements.

Very good

This product looked good but just doesn't work as described. I has a plumber come and install it . The pump wouldn't work .After a couple of hours of the plumbers time he discovered the 3 speed switch is the culprit. I certainly wasn't planning on having the plumber here for a couple of hours!