PF WaterWorks PF0989Garbage Disposal Installation KitWhite

Don't be fooled -- this is not the cheap plastic pipes -- those that are almost toy-like -- used in cheap bathroom sink plumbing. Very easy to install. Good quality. I did need to cut down one of the straight pipes to fit. Once installed, everything was rock solid -- no more leaks.

Worked great for us when installing a new garbage disposal. Good to keep one of these kits around the house for most kitchen sink drain problems and some of the later 1.5" inch codes on vanity sink drains sizes etc... when or if something leaks or have normal sink drain issues, this kit can help you and save you a service call to boot. It's easy to work with! Definitely save ya a trip to the Hardware store, will save you a headaches during after store hours episodes, like on a Sunday or after daily store hours when most local mom & pops hardware store are closed for the night etc... It's Inexpensive Sink Drain Help in a bag. However, Must use with a pair of med or large pair of channel lock pliers "not included" to firmly tighten up joints, nuts or couplings. Then run a little water & check for drips or leaks on the fittings. (Quick Note: this is a plastic or pvc product, so be careful & don't over tighten the nut fittings & you're good to go!) Hope that helps you in a punch! 😁 Thx PF WaterWorks!

Ordered this when I ordered a new garbage disposal to install in my kitchen, where there hadn't been a garbage disposal before. The kit had everything I needed, and more, to connect the disposal to my sink, my dishwasher, and my existing plumbing. In fact, with all of the extra pieces, I'm sure it would have everything needed to install a disposal in almost any sink. The only issue, which is probably to be expected, was that the short pieces were a little short for what I needed and the long versions were way too long. So I had to cut some of the longer pieces to length to be able to use them--which isn't difficult with PVC piping. I have had problems, in the past, with PVC connections leaking or coming apart. So far so good with these. Even with the vibration of the garbage disposal, nothing come loose and nothing has leaked. And I didn't even use plumber's tape or putty on install (I didn't have them handy and figured I could always put it on if there was a leak). That was a pleasant surprise.

My old disposal died and since I was replacing it, I decided to also upgrade the old plumbing under my sinks. The previous plumbing was all "flexible" joint, which seems to trap bits of food/junk, causing it to drain slowly. This kit came with everything I needed (a few extra pieces, actually). It was cheaper (not to mention easier!) to get this kit w/extras than to go to a store and buy pieces individually. You (most likely) will need to cut some of the longer pieces down using a hacksaw. For the straight pieces (where there's no threading on the end) you can easily trim the pipes down for a perfect fit. I had to do that on the pipe that connected the two sinks as (I guess?) my two sinks were an inch farther apart than one of the other pieces could reach. Easy to assemble and NO LEAKS!

Installation went easy, a few cuts then fit it together Done !

I returned due to what I considered a much thinner material that the pipes and fittings were made of and the perceived lesser quality/tightness of the fittings to to each other. Maybe my fault for not considering these perceived faults or actually researching these compared to other similar products on Amazon or at "big box" stores, but who does this on such a standard item. I assumed all were about the same.

I only needed a few pieces to reconnect everything after a remodel, but it's a solid kit

Used these to replumb a basement/laundry setup. Worked perfectly.

Great kit! All the parts needed to install a garbage disposal

Se adapto a mi triturador