Sonax (246141) Profiline CutMax - 250 ml | For Highest cutting and Polishing results | Removes sanding marks of up to P1500

It does make a dull part of your car & gives it a great shine 👍😁

I tried to remove the scratch on the glass, but it didn’t work

Produits très efficace et si facile à utiliser.

Very good quality polish and good value for the money. Even a novice can get good results with Sonax products including Perfect Finish. Just couple this to a good quality polishing pad or finishing pad and use with either a Dual Action polisher or Rotary Polisher. Make sure you buy 3 or 4 pads or you'll have to clean your pads frequently. If you have 3 or 4 pads, you can switch out the pad after every few panels which will keep your polishing consistency about the same around the entire vehicle. If not, you may lose polishing ability as the pad gets loaded up with dead paint or polishing residue. If you only have one pad, plan on washing out that pad after every few panels. Then "spin dry" it on your polisher set to the highest setting to spin out any remaining water and get it as dry as possible before you start polishing again. This is perfectly acceptable, it just takes more time than having a few extra pads and just changing them out after a few panels of polishing. This polish is easy to use and gives you a really good "glossy" final finish after wipe down. It's also pretty easy to wipe off the panel and as long as you don't use excessive amounts of polish. It can be worked for quite a while which allows you to do 4, 6, even 8 passes back and forth, up and down (cross hatching). Polish your vehicle with Perfect Finish for a PERFECT looking vehicle! Most vehicle owners will be very happy with the results of Perfect Finish. 99.9% of vehicle owners are only looking to refine their paint, clean it up, and make it glossy in appearance. They aren't worried about 3 step paint correction and having a show car finish. It just isn't what most people want. They want a good looking vehicle....period. Sonax Perfect Finish can make that happen. As long as the proper "prep" stages are taken first, such as a good wash to remove all the dirt, clay bar (highly recommended if you are going to polish with Perfect Finish), polish with Perfect Finish, and then put on a good quality wax, sealant, or coating. For just a home enthusiast, do it yourselfer, I would recommend Turtle Wax Ice-Seal & Shine which is only about $12 a bottle (cheaper if you get it on sale) and you can get 3 to 6 months of protection out of it! Again, for MOST consumers out there, that's perfectly acceptable! Turtle Wax also has a new Hybrid line of products and a Ceramic Spray Coating for about $15 which is another great option for about 3 to 6 months protection. Then after 3 to 6 months, just reapply the spray coating or sealant after a good wash. Boom....YOUR DONE! You only have to polish about once a year to keep your vehicle looking great. Just use good wash practices (A WASH BUCKET WITH A GRIT GUARD AT THE LEAST). Turtle Wax has a great wash bucket INCLUDING the grit guard at Target for about $8. Harbor Freight just started selling a good quality 21mm long throw polisher for around $100 (with their 20% off coupon) and they also have decent polishing pads to accompany the polisher for about $10 each! That's a pretty good deal and for the home enthusiast, it's a perfect polisher since you'll probably only use it a couple times per year.

Excellent product, very good cut and leaves a pretty decent finish ready for refining.