Large Square Rain Shower Head 304 Stainless Steel Ultra Thin Powerful High Pressure Top Spray Bathroom Rainfall Showerhead (10inch)

Just what we needed. 6 years ago I fitted a whole new en-suite bathroom. A nice new rainfall shower unit that was all brass and chrome and is still working well. But it had a rather cheap plastic head. The soft squidgy plastic nozzles on this head have over six years turned rock hard and so become difficult to descale. In the process of trying a couple of them had snapped off. This new head was exactly what was needed to fix it. Proper stainless metal with silicone nozzles that I think will last longer without going hard. There are 3 replacement nozzles in the box too. It is 2" bigger than the old one (I bought then 10" one, the old head was 8 inches) so makes for a better shower experience. My 10" one has just 100 nozzles though, not the unlikely 112 stated in the rubrick, but I had assumed that it would have 121 (11*11), but no, 100 (10*10). It was easy to unscrew the old head and screw this new one on. No leaks. Lovely job. Looks smart.

Got this to replace the one in our shower. Very easy to fit, looks great and works perfectly. Great price and great product,fast delivery and well packaged too. Very nice looking, fits perfectly and great price.

Nice even flow. I bought the smaller size (8”) as I thought the larger wouldn’t work due to terrible water pressure in the shower. This one is really nice, doesn’t increase pressure much but is much better then before

There is nothing to dislike about this shower head. Has a perfect finish, comes well-protected in a robust cardboard container, includes a spare mesh filter/washer, and has an adjustable swivel bearing incorporated in the hose-connecting joint. Given the circumstances of the existing shower hose supports here, it was necessary to remove these, and install a long pipe extension arm jutting from the wall, to centre over an existing bath: https://www.amazon.co.uk/Aothpher-Mounted-Stainless-Shower-stainless_steel/dp/B01LAF2YY8 Due to the weight of the shower head, and the leverage of the long extension arm, the fixing screws supplied for the wall flange were replaced by these much longer versions that have a hex head as well as Phillips screwdriver access. This enables much tighter socket spanner tightening if required. Both the drill-hole and plastic insert were filled with ‘Instant Nails’ to harden rock-solid over 48 hours, once screwed down tightly. The three plastic inserts absolutely need to be shaved flush with the wall/tiles/etc. to ensure full contact with the fixing flange: https://www.amazon.co.uk/gp/product/B083KFSTS5/ https://www.amazon.co.uk/sourcing-map-Phillips-Tapping-Stainless/dp/B09C8SFKWF/ Once the cover plate is fitted over the flange, and the ‘blind’ side of the included T-joint tightened onto the flange (using PTFE tape on the threads), with the extension arm fitted and tightened (PTFE), the whole assembly can still rotate around the flange without loosening the pipe joints. Before taking the whole weight of the shower head on the extension arm, it was thought practical to provide a cut-to-size stainless-steel chain support attached to a stainless-steel eyelet screwed into the ceiling. The hook easily accommodating the pipe diameter. This both levelled out the arm and eliminated any excessive leverage on the wall flange: https://www.amazon.co.uk/Teenitor-Hanging-Planters-Lanterns-Ornaments/dp/B07236KQFY/ Once the head was finally attached, levelled using its ball joint, and the water turned on, everything worked first time with no leaks. Due the hard water supply here, a Philips shower filter (with replaceable cartridges) has been attached to the T-joint feed using an adjustable swivel adapter: https://www.amazon.co.uk/Shower-Adapter-Extension-Connector-spinable/dp/B0CP7R4493/ The filter, which then hangs vertically, easily clears the bathroom wall: https://www.amazon.co.uk/dp/B09H5BVCMV/ Lastly, a matching stainless steel shower hose connects the Philips unit to the shower’s mixer head: https://www.amazon.co.uk/ZOTTI-Shower-Hose-Replacement-Resistance/dp/B089FHJRP2/ All these separately sourced compatible elements have been readily assembled together to provide a robust and highly practical shower upgrade. Thanks, Amazon…!

Good water flow, lighter weight than the old one, good price , see how it goes

This shower head has been in use for some months now. Easily installed, easy to clean. Gives a rainfall evenly from each jet. When jets block it is quick and easy to just run a damp cloth over to clear them. Looks nice and functions well.

I had to replace my original shower head. This one doesn’t have as many holes as my previous one but it works very well. Would buy again..

Just purchased and it looks good. Only problem is that it needs further plumbing attachments to fit it to my existing system. May improve my rating if I can get it fitted and working.

This was easy to install & it works great. The water pressure is stronger coming out of this shower head than any other one I've previously owned. The price was also great as I have spent double the money on inferior shower heads in the past. I'm very satisfied with this purchase.

Un buon prodotto di materiale ottimo

Este producto es cortito se sale por el lateral es perfecto catarata no lluvia desastre 2 meses me ha durado

Soffione veramente bello e funzionale, l’acqua esce dolcemente, sembra di stare sotto la pioggia. Per chi ha problemi di calcare basta spruzzare un prodotto anti calcare ogni tanto.

Es grande y está bien acabado, pero se necesita bastante caudal de agua