Wire Duct Kit, Open Slot Cable Management Raceway, 123in Track Desk Channel, Cord Cover Wiring, Cable Raceway Kit to Hide Wall Mount TV Cables - 8x15.4in X 1.97in X 1.97in

I bought this cable management raceway kit specifically to install and hide the cables from an inverter, and it worked perfectly. The pieces are easy to cut to size and come with everything needed: adhesive tape and screws. In my case, I had to organize several power cables of different thicknesses, and the raceways handled them without any issues. The open-slot design makes it very convenient to add or remove cables without taking apart the whole installation. The adhesive tape sticks well on smooth surfaces, but for an electrical setup like this, I highly recommend using the included screws to ensure extra strength and durability. Once installed, the space looked much cleaner, and the inverter cables are now well protected and out of sight. 🔹 Pros: Excellent for inverter or electrical equipment cables. Easy to cut and customize. Comes with both adhesive and screws. Practical design to add/remove cables quickly. 🔸 Cons: Adhesive is not strong enough on rough surfaces—better reinforced with screws. Overall, this kit is a practical, affordable, and safe way to manage and hide cables for inverters or any other electrical setup. Highly recommended.

Built a box truck camper and wanted wiring protected but accessible for upgrades/repairs. These work great for everything from #0 battery cables to 12 volt lighting wiring. Cut easily with jig saw or sharp knife. Screw mount easily.

The finish is great! Ends are frequently not square and perpendicular. They are also not grooved to be cut in the same place in whole pieces. Did not use the tape or screws included, used pocket screws with a much wider and smoother head.

Although very simple, these wire management raceways are very practical. I used small screws to attach the base, so I can’t comment on how well the adhesive works. The raceway covers attach securely, but they can be removed even in the middle of a long run with some simple finger pressure in the right place. Like others have mentioned, if you want to have a seamless transition between sections, you may need to do some careful trimming to hide the seams at the ends of the covers. Slots in the side give plenty of openings for 8-10AWG and smaller wires to exit the raceway without trimming any of the “fingers”. Adding these raceways will make a HUGE cosmetic improvement to any installation with a lot of wires.

Worked as expected.

The product itself is good. However, the process used to cut the product into sections for convenient shipping doesn't take into consideration the channel structure. Some of the channel ends needed to be trimmed / squared up for proper alignment. Also, the cover plating cuts were very rough and needed to be sanded to allow for proper fit and improved appearance.

I like the product and it’s reasonably priced the only issue I have is that the spaces between the side rails is not quite wide enough compared to all other wire duct. And they are not longer pieces but at the end of the day it is not a deal breaker it still works for my ever evolving and changing panel application.

For the money, these are very good value. I moved into my new office/lab and seriously needed cable management - these fit the bill! If you need longer runs, placing more than one in series is reasonably easy to get a nice appearance with some careful layout. I used a level & pencil to make my layout markings, and then aligned/screwed everything down carefully. The fingers are easy enough to remove if you have fairly thick cable, but definitely don't seem too fragile.

The two side tape these come with is great! Currently holding 13 sets of electrical cords and hanging from the two side tape on the ceiling easy to cut, just as good quality as name brand Panduit highly recommend

Good quality. I got a bigger size and was glad. Great to have the wires gathered.

Excellent product. Just need to consider Is not completly white, it has a greenish hue

Works great

Font le travail mais sont en plastique et le couvercle est ordinaire à installer avec les nombreuses encoches, il faut glisser le couvercle en tenant les encoches. Pourrait-être mieux