Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike

Great product - looks the part and personalised it to make it fit my e bike. No flasher relay required unless your original wiring function has a blink option already installed - if they are given constant power to the indicator line, it will sweep and blink automatically with the built in flasher relay. Was great until I shoved 43V through it... Still responded very well and stayed alight rather bright until it muddled the indicator function and started swiping in a very dark orange (indicative of too much power).

They look amazing, too a while to install as my cables were crossed and I had the 4 way blinkers. But now it all good. Make sure you get a LED relay as they wouldn't work if you just install them. They are very bright trust me any enquires about them email me. [email protected] Update poor quality, ridden in rain and it like broke, some LED got like wet or something and like wasn't bright. Then for some reason. The bike would indicate left for no reason and stuck indicating to the left. So I returned and bought something different and that worked.

These are the best budget LED indicators. The design is excellent. This is my 3rd pair and with each pair I’ve found issues after installation. It took 3 previous pairs to get them perfect on the 4th pair. You need to buy clear/black silicon, strong glue, and thread lock. Silicon is to make them waterproof where the wires come out from, or else they will get damaged by water ingress. Strong glue is to glue around and inside the thread post as it will come loose from the indicator as they don’t go in much. Last the thread lock is 100% required as you cannot over tighten due to the thread again isn’t much inside the indicator and over tightening will force the threaded post out the indicator and break. Do not just buy these on their own without these 3 items, they will break one way or another if you don’t follow the above steps. Once above is done they are perfect, waterproof and tight fitted/no movement.

Absolutely not waterproof in any way. If someone were to boil a kettle three houses away, these hunks of garbage would immediately die. They only fit if you have an adaptor on some bikes. The wire length is just enough to get away with. As cool as they look, They will only last more than 2 months if you were to live in Death Valley. Unfortunately, I live in the UK, which is underwater 99% of the bloody time.

I bought these for my Yamaha MT07 (2020). They are a good fit but require adapter plates that I had to buy seperately. The first set of these lights I installed had two fail within the first week due to water damage. I contacted Kintecks and their customer service was excellent, helpful, quick to respond and they imeadiately sent me another set for free. With this set before fitting I sealed the ends and cable exit with silicone to prevent water ingress. So far this seems to have done the trick and they are working as they should. Point to note when installing these take great care not to over tighten as they only have a short threaded tube inserted into the plastic housing that is glued in. Over tightening will break the bond and the light housing will detach from the threaded tube. There is 10mm approx to allow for fitting thickness, which with the adapter plates I had to use made it tricky. I would suggest using some thread lock and hand tighten only. Taking the above into account and what they cost I think they are a great product, time will tell how durable they prove to be!

Amazing customer service and support, Pros: •running lights (white) are really bright, break light (red) are also really bright. •when they turn on the from lights do a swipe looks amazing. Cons: • slight issue with waterproofing, I rode in heavy rain that caused issues with the led’s, This can be prevented by not riding in rain or putting some electrical tape over the exposed holes Overall good product, worth to buy.

Surprisingly good quality & have lasted well. Good bright led lights

They look good. Seem good when working however when I'm using the indicator, the brake strip won't work. Only time it works if I time it right in-between flashes and will work untill indicator comes back on. Due to this it's not really safe to use as you will be breaking/slowing down to take the junction etc and could potentially get rear ended.

Elime hızlı ulaştı kesinlikle tavsiye ederim

clignotants sympa, installation simple sans besoin de centrale clignotante , elle est integrée à chaque clignotant , il suffit juste de l'alimenter pour que ça clignote en chenillard. effet superbe. les feux diurne avant sont tres lumineux et s'eteingnent dès que la fonction clignotant est activée . pareil pour les feux stop arriere ils s'eteignent dès que le clignitant est actif. installation faite sur un quad sans probleme. Petite modification a faire qui a son importance, c'est l'étanchéité. Car ils ne sont absolument pas étanches. un peu de silicone et le tour est joué.

Après installation juste des clignoteurs avant trois Leeds ne fonctionnent pas sur l'un d'eux. Je n'ai pas encore installé les arrières car j'attends un support de plaque. Livrez rapide rien a dire.

Knipperlicht is met een defect geleverd helaas kom je daar pas achter als je hem gemonteerd heb... Knipperlicht hoort het remlicht te overrulen en dat gebeurt maar aan 1 zijde. Bedrading nagelopen op fouten maar dit zit in het knipperlicht!

Fungerar riktigt bra. Ser riktigt bra ut.