Click: Tahikem Heavy Duty Black Leveling Feet

I used on a heavy 7 ft long cabinet work Bench to prevent it from rolling on wheels. They hold very wellI liked how easy they were to install and how they fit under the sidewall and screw to side.Easy to adjust and have no problem lifting wheels off of flooe

A guy made me a couple of really nice rifle bench rests out of 2 X 6's. They would have been great on a dirt surface, but the base was not flat enough to sit on my concrete pad without some wobble. These well designed, rugged leveling feet were easy to install, easy to adjust, and eliminated all of the wobble on the now perfectly level bench rests. My only complaint is that the included mounting screws were too small, and I used #10 1 1/2" deck screws into the 2 X 6's instead for a much sturdier mount.

Used these to level a shop cabinet in my garage. The brackets are strong and easy to install as far as these things go especially for any final tweaks to the height and to lock the nut against the bracket. As another reviewer said, the feet don’t swivel on the stems so with weight on them it’s difficult to turn the stems without grinding or twisting the rubber foot into the floor. In my case the cabinet I was leveling wasn’t too heavy so I could lift it just a tiny bit so the stem turned freely.Other thoughts: The nuts included are more the thickness of jam nuts than standard ones, so it you’re trying to tighten the nut against the bracket with the stem fully retracted, you’ll have to use the little stamped wrench provided as a regular open end wrench will be too thick. And the screws provided are worthless - too long for most applications and undersized for the holes punched through the brackets. I used #10 pan head screws which fit perfectly, and you can use #12 screws if you don’t mind opening up the holes a little bit.

Best product I could have used to raise my cupboards to have them level and sturdy.

Definitely Sturdy. Used them to stabilize an old bookcase. Working out great.

These leveling feet are a simple design that puts the weight of the object you are mounting them on in the correct place. They are made from very good material, easy to install and after installed are easy to adjust and lock in place. Will purchase again when needed.

Nice - use them on my BlackstoneI used rivets instead of the screws they supplies

The hardware it self seems really good, but the quality of the screws that they send with it is crap. They are made of a super soft metal and strip out super easy and the heads snap off easy as well. I did use pilot holes in the Doug fir I was screwing into. Good product but I would replace the screws with higher quality ones before installing.