Janome HD1000 Heavy-Duty Sewing Machine with 14 Built-In Stitches

I just wanted a simple mechanical machine, no fancy stitches or anything, and this one looked to fit all of my requirements. Its very sturdy, and arrived in working order. (from Mr. Vac and Mrs. Sew, via Amazon) I have two other machines, basic Brothers that I've had for 5-10 years, they are good little machines but they get a bit cranky when it comes to heavier or thicker fabrics. I love how quiet it is, my other two machines are both a lot louder, no one in the house could hear me sewing from the other rooms on this machine :) Its very heavy and solid, no bouncing around while it sews. It was not too hard to thread, the instructions are very clear and easy to follow, and it wound a nice even bobbin. The manual is large and easy to read and flip through for help. The bobbin is the old school front load kind, with the metal casing and little latch, my old Brother has the same system (it looks exactly the same actually) so it was familiar to me. The thread cutter is a nice touch, I haven't used it much yet, its a hidden blade up on the upper part of the machine, near the needle threader, pull your project up, hook the thread into it and tug to cut the thread. The light is bright enough, it could be a bit brighter, but I can always get one of those stick on lights if I need more illumination. It has a drop feed mode, the lever to drop the feed dogs is easy to use, and you can raise the presser foot extra high for thicker fabrics. I only have two minor complaints- -the on/off switch is located behind the foot controller/power plug, its a bit awkward and fumble-y to reach it. -for bobbin winding, the stop motion isn't automatic like on my other machines when you slide the bobbin spindle over. You have to go to the handwheel and turn the 'stop motion' wheel before you start winding to disengage the needle. (and tighten it back to sew again when you're finished winding!!) Those are small complaints, and I'm sure I will become accustomed to them after a bit more use. Otherwise I love this machine and am very pleased with the purchase! So far I've only sewed cotton and batting, but I plan to use it on some glitter vinyl, laminated cotton, and heavier fabrics when I get a chance. it arrived with a hard case that slips over the top (the machine's handle pokes through to form the case handle, there are no latches or anything to hold it to the machine, and it won't fit over a spool of thread on the spindle) 4 clear plastic bobbins, a tube of oil, 4 feet, a seam ripper, two screwdrivers, and two red felt disks, the foot controller and plug, and a hem guide. I'm kind of excited to test out the rolled hem foot, I've never used one before :) EDIT/UPDATE: after about 7 months of use, something in the handwheel broke and it will no longer wind bobbins. I have one of those bobbin winder machine thingies that I prefer to use, so I haven't bothered to get it repaired or send it back in. I must have twisted it too far or the wrong way when trying to engage the stop motion and something in there snapped. so, be very careful when messing with the stop motion part of the handwheel :P BUT it is a total workhorse, I use it every day to sew, mostly through layers of cotton, twill, batting, and elastic. Easy to clean, open up, and oil, and very user friendly as far as maintenance goes. I still LOVE this machine :) (the placement of the on/off switch still bugs me though, such an awkward spot)

I was torn between this Janome HD1000 and the Singer Heavy Duty. Even though I'm a sewing novice, I personally dislike the new wave of plastic bodied machines. I was using a beautiful robin's egg blue Singer from the '60s or '70s--older than I am!--and it was great until perplexing tension issues began to crop up. I didn't want a slick computerized machine taking its place, so the Singer Heavy Duty immediately caught my eye, due to its 'traditional' looking body as well as exciting features such as a drop-in bobbin and 20 plus stitches, one step buttonhole, etc. However, the lackluster reviews, complaints of a very short lifespan, and overall disintegration of the Singer brand's quality left me wary. The metal body of the Janome is amazing. Sure, it may be heavier, but the overall durability seems greater than any plastic. The bobbin is front loading, which was frightening at first (no 'jam free' guarantee) but it hasn't been a problem at all. The metal casing that holds the bobbin seems very sturdy and made to last. Though the flashiness of a thousand different stitches is alluring, I realistically use only... Two or so for my garment sewing. I haven't touched any other stitches yet, so 14 is more than enough for me. Those who are doing projects that show off stitchwork might want more variety, but again, I think the Janome's offerings are more than adequate for most people. As I said, I'm relatively new to sewing machines (I used to hand sew everything!), but I was able to use the Janome soon after it was unpacked. I had to look up how to load the bobbin, and the inner hand wheel was initially stubborn (I used one of those grippy rubber jar-openers to help--very useful!), and everything flew from there. The automatic needle threader is an amazing luxury; at first, I thought it might not really be necessary, but I absolutely am in love with it. And oddly enough, I received a hard case even though I thought this Janome came with a soft cover (but no complaints here!) I first felt guilty about being unfaithful to my older Singer, but this Janome is quickly becoming an indispensible new friend. EDIT: It's a little over a year later (9/12) and this machine is humming away beautifully. I still use the metal Bernina bobbins, and they work very well. I did have some frustrating issues with getting the bobbin thread picked up, as it seemed to get caught and jam, but I realized that this was due to my own inexperience and stupidity! As I'm sure is common knowledge for everyone else, I only needed to make sure I was bringing the needle all the way back up to its highest position before attempting to pull up the bobbin thread. I only mention this embarrassing incident in case others may have had the same problem, as I had the initial reaction of blaming the machine rather than myself. Anyway, I've sewn quilting-quality cotton to oilcloth and several layers (seriously, like 4-5) of heavy cotton duck (to make a heavy-duty saddle bag for my bike.. it went quite well, considering I pulled the plan from thin air--I'm so proud, haha) and the Janome worked right through them. I occasionally had some difficulty with the layers and layers of folded cotton duck, but that's where the extra high presser foot really came in handy! A sewing machine isn't essential in my life, as I'm a casual, hobby sewer, but I love my Janome like I would an extra arm (and who doesn't need an extra arm sometimes?), though without the self-consciousness an additional appendage would bring.

This recent purchase of the Janome HD 1000 is my third sewing machine during my lifetime. I bought a Kenmore when I graduated from High School and used it to make many, many articles of clothing ranging from dresses to suits to baby clothes until I quite literally wore it out. Then I replaced it with another Kenmore about the time my daughters were starting to learn to sew in 4-H and the three of us literally wore it out. We made clothes, quilts, repaired jeans, etc. until they grew up and I gradually stopped sewing so much. Recently I pulled out the old trustworthy Kenmore to find that I could no longer get it to do a zigzag stitch and my hubby confirmed that I had worn the mechanism so much that I might as well get a new machine. :) As I searched for a replacement I decided to try a Janome as I had discovered that they supply the machines for Kenmore. I also have a two year old Janome serger and just love it. I decided to get a machine that would do all I require without going overboard on too many bells and whistles and so wound up with the choice of this model. I have had this machine for about a week now and have tried it for a few projects to get the hang of it. I just found that I am going to be a first time grandma and must get working on all those little clothes and quilts! So how does it stack up? Well, here is what I think..... The machine came with an instruction book, two screw drivers,a seam riper, a small container of oil, extra needles, four bobbins, a package of needles, and four presser feet.The presser feet include an all purpose foot for straight and zigzag stitching, buttonhole foot, zipper foot and rolled hemming foot. The zipper foot is better than the old one I had and the rolled hemming foot is a nice option although I usually do that with my serger. The machine has a side bobbin insertion with a metal bobbin housing which is like my first Kenmore and I prefer that to the drop-in bobbin of my last machine. It makes for better adjustment of stitch tension in my opinion and just works better. It also includes a needle threader which I just love now that I am wearing bifocals. I know I will use that feature a lot! There are fourteen built-in stitch variations which are more than enough, especially if you do most of your stretch sewing with a serger like I do. The buttonhole stitch is built in but the buttonhole foot is not that great in my opinion. Fortunately, I discovered that my old presser feet from my Kenmore fit like a dream so I can make buttonholes just like I have done in times past and am happy. I might not have been so happy if that were not the case. I have tried out the machine on a pair of denim Capri's that I needed to mend and while it growled at me a little, the stitches were perfect so I can put up with that. The instruction book is not nearly as detailed as my former ones, but for an experienced seamstress, this is no problem. Bottom line, this is a good all-around machine for normal sewing tasks and will serve most people well although a novice might be a little confused by the lack of instructions. Also, don't expect a great number of accessories, just the basics. I knew all of that going into this purchase so I am happy and maybe this will be the last machine I will ever have to buy.

I bought this machine about a year ago and had not taken it out of the box because I was using my basic Kenmore and basically was too lazy to switch over. Then I was not sewing as much, life got busy and kind of forgot I had it in my sewing closet. This past Christmas (2013) my daughter (on a whim and because it was a good deal) bought me a Singer Heritage machine, computerized and beautiful. I began sewing on it - was much better than the Kenmore but almost felt too lightweight. However, I loved the automated tension adjustment and ease of stitching. But then needed to make a buttonhole. That particular option would not work and much to my complete and utter disappointment, there is NO recourse for obtaining help except to go to the Singer web-site and watch the video that does not address how to make a buttonhole much less how to troubleshoot. There are NO contact numbers and one is basically left with nothing in place to address such problems. I boxed up the Singer and pulled out my Janome and it was the best machine I've EVER sewn on (I've been sewing about 45 years.) The machine is solid, heavy and stitching is sure. Everything about this machine is sound - it even sounded more substantial than the others. I just finished my first buttonhole on the Janome and it was a breeze and took me less than 5 minutes. And to think I've had the machine in my closet for about 3 years! <kicking myself in the butt> The machine is a wonderful machine. No fancy bells and whistles but enough extras to handle most sewing projects. There are also numerous youtube videos for operation and the manual is concise and easy to understand. I'm looking forward to many years of operation with this machine.

I’ve been using Janome machines for heavy weight duffle bags, beach bags, and backpacks. The Sewist performs well. The stitches are even and the machines runs through multiple layers without complaining. I bought this HD 1000 to give my Sewist some rest between projects while it was being cleaned. Waste of time and money. The front loading bobbin is a bother when changing thread color. There are tiny metal flaps that catch the bobbin thread and tear it while stitching. The fly wheel loosens during multiple layers which spins the wheel without lifting the needle. It needed to be tightened several times to make its way to the end of the seam. Forget about adding zippers. The placement of the notch it the foot deliberately shredded and broke the thread. The bobbin thread became so knotted that it was necessary to clip it close to the casing to free the threads and manually work them free because the wheel was useless to help lift the needle until the bobbin was cleared. Save your money. Buy the Sewist instead.

I bought this machine in 2011. I sew flannel quilts, denim bags, plush creatures of decor weight fabric, Leather bags ~ you name it and this machine can handle it. Bring on the thick layers of denim, this Glorious Beast can take it (I use a Janome walking foot and a little plastic tool called a " Jeanamajig" to hem jeans). This machine is CAST METAL and is SOLID. It does not jump around when you sew like my cheap plastic-body sewing machines (I'm talking to you, Brother: never again!) I have had it for 14 years and never had it serviced. It maintains perfect tension (amazing!) and lets me know when it needs to be cleaned and oiled by being noisy(it is a relatively quiet machine but starts to sound like a machine gun when it needs cleaning and oiling). It takes less than 10 minutes from start to finish to service it; remove a few screws and the old needle, remove any lint or thread (using a cotton Q-tip) and add fresh machine oil (also with a Q-Tip) as per the instructions in the manual. Then it is all ready again to make more delightful cozy items for family and friends. I would not hesitate to buy this machine again. My neighbor also bought the very same model at about the same time and sews even more than I. Both of us love our Janome HD1000's! This does not have any of the gimmicky nonsense like fancy stitches, just the ones you need for making new items and hemming or repairing old ones. If you sew anything thick (like quits!) the Janome Walking Foot (sold seperately) is well worth the price and takes the swearing out of quilting. I freemotion quilt and use a darning foot for that task with excellent results (the most reliable thread I have found is the German thread made in Greece called Gutterman). To be a Happy Sewist, invest just a bit in this machine and it will reward you with years of frustration-free sewing, no regrets. This is so well built I will be passing it down to my daughters who also sew (but they can't have it just yet!)

Just got this machine today and it works well. It's not Bernina quality (which it what I used for 30 plus years until it finally wore out), but it's looks like it will be very good for the occasional sewing that I plan to use it for. The other reviewers really seem to love their machines, and I am hopeful that I will continue to like mine as time passes. I did have one problem, which, thankfully, I was able to fix. The bobbin holder didn't work right and apparently was not installed properly. Took a little while to figure out what was wrong, but the machine is now running very smoothly. Another reviewer mentioned using metal bobbins. Based on that I decided to try out the leftover bobbins from my old Bernina machine. They work beautifully--the machine actually runs a little smoother than with the plastic bobbins that came with it. I especially like using the Guterman all cotton thread in this machine. My only current complaint is that I can't find a walking foot that will work with this machine. Review update: After about a year this machine started not working all that well, and then it just stopped working completely. For the price I paid,Idid not expect much longevity. I have replaced this machine with a Babylock Grace, which seems to be a much better machine.

I finally found what I was looking for. Machine that reminds me my old German build sewing machine that was strong and last me more than 2 decades with 0 issues. This Janome machine even sounds just like that one. I had a problem to start it though, it wouldn’t move the fabric, I was about to return it, but first I called technical support and they explained me that there is a switch needs to be turned in the order to lift the teeth that move the fabric. I never came across with anything like this before. They said it’s one of the features of Janome. Works great!