

🎯 Dominate your desk clutter with pro-grade cable control!
The Updated Cable Raceway Kit features two 15.4-inch open-slot PVC channels designed to accommodate thick cables up to 0.4 inches in diameter, including power, HDMI, and Ethernet cords. This all-inclusive kit comes with adhesive tape, wire holders, and Velcro ties for a quick, customizable installation under desks or behind TVs. Made from fireproof, impact-resistant material, it ensures safety while delivering a clean, professional cable management solution favored by tech-savvy professionals.







| ASIN | B08LYKF8S1 |
| Best Sellers Rank | #3,052 in Electronics ( See Top 100 in Electronics ) #53 in Cable Raceways |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,653) |
| Date First Available | October 27, 2020 |
| Item Weight | 10.6 ounces |
| Manufacturer | ENONCI |
| Product Dimensions | 15.4 x 1.6 x 0.04 inches |
R**Y
Great cable management system
Really helped clean up the backside of my desk. Absolutely perfect, easy to use and easy to install cable management system. Wish it was $5.00 cheaper, but for $20 it's a good value. A few more Velcro cable ties would be nice. Seems very sturdy, had to get some very thick power cords in there and the "tabs" didn't even show any sign of fatigue (usually you would see plastic discolor under stress). Great concept and design. Super easy to cut and customize the length, so very flexible in terms of installation. Can hold multiple thick cables such as multi display ports and power cords. So good amount of space. Would buy again.
F**H
A bit better than I expected.
Pleasantly surprised at how well these are working. I got a large U-shaped work area, and bought two sets of these to go completely around the sides. I did NOT use adhesive; I have had such terrible luck with adhesive that I don't even try it for pretty much anything anymore; these are screwed into the bottom of my solid wood desk. If I want to remove them, I will not be stuck with residual glue, just some holes that no one will see because they're on the bottom - so that's the direction I went for installation. Of course, that made installation a bit more difficult. I used an electric drill, the appropriate sized bit, and a stop on the bit to that I didn't drill too deep. Held up each holder to the desk bottom, marked the holes, drilled, installed, repeat. The channels hold a decent amount of cables, which can "sneak" in or out virtually anywhere along the path. Most areas I did not need a lot of cable storage, but along the "main" side of my desk it's holding two power cables, two heavy duty HDMI cables, and some lightweight USB cables, and it all fits. The covers snap on easily, and slide off if you need to make adjustments. The tabs between the holes along the the channel are not too sturdy on their own; easy to bend one in or out to get your cable through; need to bend it back... I haven't had any issues with it, though, and actually makes it easier to finagle larger cables into place. I'm ultimately pretty happy with how neat my cabling has ended up. My office is pretty open, and the desks are just tops, no built in drawers or anything, and you don't see a bunch of cables hanging down, it's all nice and tidy, now, even if it was a bit of work to get there.
W**H
Sturdy and great the desk solution
Good raceways! Well worth the money. My desk is clutter cable free and I love it. Cable management is a real thing, people! These go a long way towards my OCD being satisfied. They were easy to attach under my desk using screws - though I upgraded to screws a little longer than those supplied. Suggestion: pre-drill and add washers to keep the screws from busting through the plastic. And don't over tighten them either. Big bonus: these raceways can handle a lot of cables: mine has 3 power cords and 3 monitor cords, plus 2 speaker cords, 3 ethernet cables and 2 USB cables. All running through a single raceway. I can also testify that the snap on cover stays firmly in place - even when mounted under the desk. I can make this statement because recently I had a real struggle trying to pull off the slide on cap to get at some cables I needed to replace. I had to use several 4-letter words and butter knife to pry it off. There was also a bandaid involved, which is how I learned a butter knife works better than a flathead screwdriver. The problem was I did not have room to slide the cap off, so I was stuck trying to pry the thing off instead. Lesson learned. Word of advice: make sure that you leave room to be able to slide the cover off the end of the raceway for future access. Things I would change: 1) Supply better screws and washers - not everyone wants to rely on just tape to attach the raceway. 2) Make the covers hinged to drop down instead of sliding on. This would make it A LOT easier to get at cables when you need to. If the manufacturer is reading this: contact me if you ever put out a hinged cap design. I'll buy it! You make a good product.
R**R
ENONCI Updated Cable Raceway Kit
Installation was quick and easy. Product works as advertised. It is very nice and manages the cables and keeps things neat
J**N
Clean look and easy
Includes everything you need to manage some cables, other than the cables. Works as shown and looks pretty good once installed. Very easy to install with either the tape or screws.
C**R
Keeping your cables under control!
This cable raceway kit is an Ideal Way to route and protect cables on model railways and many other electrical platforms around the home, office or factory. Easy to use, flexible, adaptable, easy to cut, has strong two sided adhesive included in the package, comes with capable ties and screws and plate covers to match the raceway. I will be buying more of this product.
E**.
MVP of Cable Management
This is one of the coolest cable management products I've ever purchased. It really helped organize the messy cable spaghetti I had behind my television. This solves the problem of having cables coming from different directions and routing them neatly. It lets you insert a cable from anywhere, run it through the track, then have it exit from any position. There's a deceptively large amount of space to run cables. The covers snap on easily and beautifully hide the cable mess. The tracks stick really well to the wall. I even have slightly textured painted walls, and they have stayed secure without any screws (though you can use screws if you want).
U**1
Good
S**R
Used these under my new desk for cable management. Worked great and easy to install, even when making a mistake they came off easy to be reinstalled correctly.
M**E
Exactly as described. Easy to use. Timely delivery.
B**E
Son bastante útiles y fáciles de instalar. Traen todo lo necesario para ese propósito. Yo usé la cinta de montaje,que incluso pude despegar y volver a colocar. Es de plástico y flexible, pero los agujeros por donde pasan los cables, se quedan marcados si se doblan. No son muy anchos, apenas lo suficiente. Quizá si tienes una gran cantidad de cables, no sean una gran opción.
C**S
Muy buen producto, hace que no se vea prácticamente ningún cable, lo recomiendo mucho si tienes un escritorio de cristal. Mi parte favorita fue la cinta muy resistente y la usé para más cosas y no se despega en ninguna superficie
Trustpilot
2 weeks ago
2 weeks ago