HONEYBULL Anti Grinding Guard Set [12 Pack - Thin] Comes in Smaller Size for Better Comfort | Comfortable Custom Mouth Guard for Nighttime Teeth Grinding

Read the directions and follow them. The directions are simple to follow and help give a better fit. Don't use without molding them or they will be uncomfortable and likely cause discomfort. I have been using these for years since radiation damage during treatment of head and neck cancer. I only clench my teeth I do not grind them. It is important to mold this guard! When molding I use my thumbs to mold it to my back teeth. These are reusable for about 1 month each before they breakdown, then are discarded in the trash. I purchase the thick guards as the thin didn't last as long. When molded they suppress headaches, tooth pain, jaw pain and cracking of teeth. I have used other products that are more expensive, but these have been just as effective and are of comparable quality. I will continue to buy these annually. I reccomend purchasing this product.

These work fairly well to keep my teeth from damage while sleeping. The biggest downside is that they split lengthwise, sometimes after only one or two nights. Having said that, they are still a good value for the money. The night guard that I broke from the dentist cost $350. These are a much better alternative. I wish they would stop putting a case in every package. You only need one really to start. It's a waste. They should make a package of just mouth guards.

I bought these guards when the brand I previously bought suddenly doubled in price (tariffs?). I get twice as many guards for half the money and the fit fine. I have a large mouth and this guard spans my entire upper jaw, minus the last molar on each side. Even though they are labeled as thin, I find them to be fairly thick.

Chewed right through, didn't last too long for one. Kinda big & bulky. Not too comfortable. Kinda a waste of money, instead just go to the dentist to get a nightguard. 🫠

I had been looking for a different set of mouth guards for bruxism due to a prior brand smelling like a plastic swamp on a recent purchase. These have almost no scent, and they seem to be made and cured properly. I have no idea how or why some of these products absolutely reek of plastic and chemicals, but I am not ever accepting a product again that does. It's not normal. Don't accept it. In store you are basically getting fleeced, paying upward of 15 bucks for ONE plastic or silicone guard. This is a great deal by that standard. They list silicone for these, but I am not quite sure what they are made from. It works much better than some of these store bought ones that claim to be made with vinyl or other chemicals. I shredded a couple of those ones in days from Walmart. These hold up quite well for the cost. I'd say I usually start to see degradation after a couple weeks, and these are still looking okay. I expect a guard to last about 2 weeks to 1 month for me personally, and that's why the 12 pack is such a huge issue. A lot of guards start to break apart, and you might be eating those bits if the deterioration becomes too much. Nobody in their right mind should pay 15 dollars for what amounts to a tiny bit of chemicals in a mold that will last two weeks. They are very easily made overseas or even in the US. That is why Honeybull is giving you 12 of them here. Because they are still making good profit. Now imagine the profit on selling 1 of these for basically the same price lol! And with worse quality! By their factory mold these do NOT fit in your mouth well. You NEED to trim these. In fact you need to TRIM ALL MOUTH GUARDS TO FIT YOUR UNIQUE MOUTH. I do NOT boil them but put them into hot water to get semi-molded. Use a small sauce pan for the least amount of water wasted. Never do 20 seconds of boiling water ever. It's complete overkill and almost always ruins or partially ruins the mold. You don't necessarily want a deformed mold that is softer than normal, as that will lead to degradation for many quickly. Just start with 5 seconds in not quite boiling water and go from there. These are big guards even for the slim version. Cut the back section of the guard off completely to your preference, and then trim the height so it fits in your mouth. Adjust as needed as you trim. I trim the front wall almost completely off. This is necessary so you can fit the entire guard in your mouth, close it, and sleep without drooling. What you are left with is basically more of a half piece guard, and this is EXACTLY what you need. You should be able to breathe and close your mouth completely with this guard in. Can't? You haven't trimmed your guard properly. Follow these directions and this guard will be absolute heaven at night. Minimal or no drool. Covers all relevant teeth. Nothing jutting in between your lips to crowbar your mouth open leading to drool on pillows. After a couple wears you barely notice them. I cut basically the entire mold to what amounts to a mostly flat tray in my mouth, leaving the centered tongue protector on. When I bite down most of the pressure is spread from the front to the middle, and the smaller guard works better because your mouth feels in a more natural state. Even when biting hard, a smaller guard should protect all teeth without needing a section to cover the back. I have severe bruxism at night, and this seems to be work best for me while allowing me to breathe and sleep on my side. One should be able to CLOSE their entire mouth without leaking on their side. If you cannot close your mouth with this in it and be comfortable, then you have NOT trimmed your guard properly. It's that simple. So far this is the best deal for mouth guards I have found. The silicone, or whatever, material seems to hold up quite well, though, slight degradation will get to it after a couple weeks like always. But so far they have kept a pretty smooth and robust appearance compared to some of the more useless and softer guards, which do not hold up for even a week. Lastly, I always soak my guard in some soap and water before use anyway. Just to get any gunk off that might be from the factory. That's about all you need to know for these mouth guards. I hope you find what you need. Bruxism sucks!

The guard does stay in place as you sleep and I didn’t wake up while using this mouth guard so my quality of sleep wasn’t disturbed. However…The silicone is so thick that I noticed my jaw position completely shifted when I woke up. It took over an hour of massaging and movement to get my bite correct again. I bit hard to form the fit and it still wasn’t enough. The thinner trays were way too large for my mouth so I couldn’t even use them. If you have a clinically diagnosed small mouth, these are not for you. Also, you cannot return them for a refund (on your own) so you’ll have to reach out to Amazon Customer support for assistance if you don’t like them.

I was very surprised by how comfortable these HONEYBULL anti-grinding guards are. They offer good teeth protection, stay in place during the night, and are easy to use once molded. The quality and overall functionality are impressive for the price. They’re not exactly the same as the custom dental guard I had before, but very similar in comfort. I previously paid $720 for a custom one that my dog destroyed, and I would never pay that again. I’ve seen some negative reviews, but so far I only have positive things to say. This is my first time using them, and I plan to post an update after a few months of use.

I am a serious grinder. These are supposed to be extra thick for us extreme grinders. They do not last one night! They are worse that the regular ones (not thick). I hate that I'm giving these a bad reviews because that's not my prerogative in life. They just simply are not hardy enough for my grinding. Twice I have chewed simply through the whole thing and ended up with two pieces of product.