Kuat Racks NV Base 2.0 Bike Rack

Had a Yakima OnRamp and could not get my eBike to ride up the ramp safely and it wobbled a bit while driving. I found it easier to move bike alongside rack, hold back brake and pull up front wheel. Put that wheel into rack holder then lift the back wheel onto rack. Cuts the eBikes weight in half thus no need for ramp. Also, with a ramp, you need 12ft or so on EITHER side of vehicle to load bike. The ramp is not practical for me. The cable lock on this rack is kinda funky and getting it locked and opening up the weatherproof cap on the lock is not easy. I will likely use my own cable/lock. Also, this rack does NOT have a welded ring or something to attach a lock cable to. The only way to lock a bike to the rack is to lock the racks cable into a loop and pass your own cable thru that loop. Going down road, this rack does not bounce, the bolts/fittings etc. are very close tolerance. I also found you do not use/need a threaded rod that goes thru hitch. All you need is a 5/8" pin with a lock on the end. The rack has a knob that takes out any slop in the hitch. I have checked the tightness a few times after driving a bit and sometimes I can put back another 1/8 turn but no more. It stays quick snug. Assembly was very quick and simple but the instructions could be improved. Why not give install details about end caps ? I had to take the rack all apart just to get the end-cap inserted properly. Then the wrench/tool. I don't recall any guidance on how to store that tool on the rack. Overall very strongly recommended.

Lets get the bad out of the way firstly.. It's very difficult to put together and I'm pretty good at putting things together. They give you a barcode that you are suppose to take a photo of with your phone which leads you to a video that instructs you how to put it together. There is not a lot of pieces to put together but the thing is awkward because of the way the middle hitch is elevated.. Basically there is a left and right side for the wheels that have to be bolted together that connect to the middle hitch and without something the exact height to elevate the wheel shafts to the holes are a real chore to line up. It's seriously difficult and will take most people around 45 minutes to an hour. It's super frustrating I'm not going to lie.. Also the kick lever to raise and and lower the bike rack has no indicator how it's supposed to face or go on.. If you can't find the video, or no device to help you it's impossible because it can only be screwed in one way to work properly although the rack will accept it mounted in other configurations as well but none of those work.. I ended up finding a video on youtube of some dude putting it on his car and watched how his was angled.. Okay, now the good- The bike rack is stunning looking and solid as a ROCK.. It doesn't move at all and can fit my two 29er beastly road bikes with ease.. The bike lock system is genius and the hitch lock is industrial grade. I couldn't ask for anything more out of a bike rack quite honestly.. Previously I owned a kuat sherpa 1.0 and that thing is a toy compared to the NV 2.0.

This bike rack is truly impressive. Although the installation process can be a bit cumbersome due to the large and heavy pieces, I managed to assemble it myself after taking some time to align and tighten everything. Once assembled, the rack feels solid and durable, weighing around 50lbs. Mounting it on the hitch receiver, you'll notice its weight, but the bikes are easy to load and unload. The rack conveniently folds and lowers, allowing access to the trunk or hatch of an SUV even with the bikes on. The only drawback I encountered was that the pin and lock didn't fit in the limited space of the Tesla Model Y's hitch receiver. I had to find another lock that fits. Overall, I'm highly satisfied with my purchase and expect this product to last for many years. I highly recommend it.

Sturdy and very well engineered. Everything on the bike rack is very well thought out. We use it to carry our 2 Evelo delta x's and they weigh about 60 lbs each with the battery off. It handles them very well. There is near zero wobble and putting bikes on and off is super easy and very quick. My bikes have fenders and that is no problem for the rack. I just clamp down as close the fender as possible and I dont over tighten the clamps down. They work great. The integrated cable lock works great for us to run in a restaurant and grab a bite to eat and we worry less. Its not a chain but if you park in a decent spot where the vehicle is secure I would not worry about someone grabbing them. Even Evelo recommends this rack for their ebikes.

I put it on a 2019 Tahoe. It fits great. You can lower it down so you can open the back hatch. I haven't tried that with two bikes on it though. I probably should. It doesn't block the camera too bad when there are no bikes on it but it does seem to block the back up collision sensor so you no longer get a warning when you're about to back into your garage door or whatever. With bikes attached, it blocks the camera considerably more but not completely and the camera is still functional I would say. It looks awesome. It is very robust, well thought out, well constructed with high quality materials and the tolerances are tight. All pieces were included though it seemed like they weren't for a few minutes. It is a lot of work to assemble however and the directions are not as helpful as they could be. That would be my only minor complaints. All in all, this thing is really nice, works very well and looks great and I have no major complaints so 5 stars.

Me gusto mucho el diseño es práctico, solo un poco pesado por el material pero excelente producto

Très solide même avec 2 ebike

this hitch rack is perfect. I wouldn't change anything if I were to build it myself. I don't build bike racks at all, but if I did and was great at it, I would build it like this. very sturdy. one of the only bike racks I feel comfortable enough just forgetting about instead of staring in the rear mirror anticipating the moment my bikes fall off and tumble down the road. this rack offers plenty peace of mind and also looks great. especially mounted in my KUAT pivot 2.0 swing arm.

Extremly fast shipping. Easy to install. Approx 1 hr install with breaks due to other commitments. Fits well and looks like it was a factory install. Great bike carrier and no rattles or movement during transport