Switchback White/Amber LED Front Fog Daytime Running Lamp w/Dynamic Flash LED Turn Signal light Feature Compatible with Toyota Corolla 2021-2022 L LE XLE Hybrid Accessories (Front Fog Light)

Easy to install!

Bought it for safety reason but it looks surprisingly good with my 2023 Corolla Hybrid LE. The build quality is just average but I think you get what you paid for. To make it more water tight, I added some silicone glue along the edge and hope this can prevent water leakage problem down the road. Installation is pretty straightforward. I took out the rear light Assembly and tap it into four existing electrical lines. (including driving light, break light, turning light, and of course the ground wire.). I found some YouTube video that is very helpful when I was in doubt during the process. One thing I noticed is that the rear bumper has the pre marked area for wire feed through and it seems this area was actually designed for LED lighting system. My car is in Dark blue and it has relatively smaller profile especially driving at night. this lights making multiple car more visible plus adding more dynamic effect when I use the turn signal. What’s not to like for adding something that is relatively inexpensive that make your car safer and look cooler. Update 04/2023 Just bought the front bumper light and managed to installed is on my 2023 Corolla Hybrid. I am not going to say anything here except to say that I am very happy with the result. Watch the video and make your own judgement. Update 05/2023 This update is to show you how I get the front bumper light installed. 1. To get access to the location for light installation: Removed some screws and one clip on the bottom plus the two clips in the wheel well. (Some youtube video about Front Bumper removal can give you some idea how to do it) 2. To connect the wires. For 2023 Corolla Hybrid, 7 wires connected to light assembly using a single connector. I used Multi-meter to find the ground wire first. After that, I found the wire with 12V indication when turn on the headlight. Then I found the wire with intermittent 12V when the turn signal is on. Simply tap into those three wires and that's it.

It fits perfectly with my Toyota Corolla 2024 SE and gives it an awesome look that nobody else has. It is easy to install if you are a little handy. I would recommend this item to anyone.

Love these. Fast shipping seems like decent quality. Didn't come with instructions so here is how I did mine for the 2021 Corolla SE. Yellow to yellow black to black beside the yellow. Red to my blue wire and green to my red I cut small hole in area behind original reflector in the small square with blade and fished wires through hole.

Buenas calida

ZERO install instructions available hardly anywhere. By spending about an hour researching I figured I needed to drill a couple holes for the wires behind the knock outs and then which wires I needed to splice together, which fuse was ACC and now it works great. Product is good but DO NOT purchase this thinkings it’s a simple plug and play. It wasn’t overly complicated or difficult but I’m not new to wiring electronics in vehicles. Also, it’s more of an accent than true “fog lights”. IMO.

Follow the YouTube video. Slide out the light fixture by pushing back toward the rear bumper one grove and guide pin holding it in place. Then push a long rigid snake from the opening behind the light fixture down until you see it under the car. Remove the one screw on the reflector and push down on the tab at top of the reflector under the side panel. Tape the wires to the snake and pull up to the opening behind the light fixture. The wire on your new led is long enough so don't worry. 2 wires connect to the wires 2 feeding the turn signal bulb ( yellow to yellow, black to black), and 2 wires connect to the 4 wires feeding the brake light ( red to blue, green to red). Follow the color guide in the box.

Just installed today. They work great and look great! Only time will tell how they hold up, but as of now, they look great! I got the set with wire harnesses and installation was a breeze!