U.FL Mini PCI to RP SMA Pigtail Antenna WiFi Router Cable Antenna NGFF Interface for WiFi Router Gateway Wireless PCIE Network Card Pack of 2

This order was great. I think I purchased it for six dollars and expected only one pigtail, but two came and I was completely surprised. Now I use these for a project. I'll explain the project below. Know if you need any help with the same project or projects similar, let me know if I can help in anyway. I would be more than happy to help you out. I absolutely loved these panel antennas. These directional antennas I used to have them for my project. My project was to take my existing access point extender for my DJI phantom multi-copter. What I did was I purchased two pigtail connectors, and I drilled a hole in the phantoms repeater and connected the antenna parts on the circuit board. I mounted the directional antennas. you can use only one panel antenna if you want, but I decided to use to directional panel antennas because you can't beat the price. They do work and they work incredibly great with my phantom vision plus. I mounted them on my tripod. You could do something else and mounted on a pole with a base but I decided to purchase a tripod which was cheap because I found it at a thrift shop and it was broken. I fixed the parts on the tripod that were broken and I installed the access Point extender and I mounted the two directional panel antennas , one pointing more vertical and one pointing more towards the sky to capture the height and altitude of the drone and the other one antenna to cover the distance of the drone. You can use any router extender if you're not comfortable taking apart the phantom vision control repeater but keep in mind it is so easy to do the mod, but nonetheless you can get a different router or any router and configure it but remember you have to rebind the camera system and the access point So, I am extremely happy with my set up. I have my tripod. I have it extended all the way out, I purchased an attachment that holds an iPhone up to an iPad so that I could see it a bigger picture of my flight, I added the two antenna panels, added the access point, and I also decided to purchase a power bank and attach that to the tripod is well. The power bank I think is it 3200 or 5300 milliamps per hour. Has an indicator of the capacity of the power bank and it also has a cool flashlight on it. Which is useful when it gets dark and you're putting things away. The power bank is constantly connected to the access to charge while it's in operation. Overall a sweet success

arrived on time and in good packaging. Well it is exactly as advertised. My only issue was that I needed a pigtail with wire leads to solder to the board, but I could not find any such animal. If any one knows where to find one, please let me know. In the meantime I had to gently strip this miniature coax cable to separate the thinner than hair bundles of wire to tin and attach them. Worked very well but for my new twitch in the eyes, haha. All kidding aside the product is very well constructed and works very well.

These worked fine for me, but the cable is very thin and the description doesn't give any specification for it. This concerned me for two reasons: first, on my initial install I inadvertently put a sharp bend in one; this is too easy to do and kind of a no-no with antenna cables as it can seriously impair the signal. You want to curve the cable at a radius of maybe a half-inch, no less. Second, when it' s this thin I'm inclined to doubt that it's adequately shielded; which means you can get signal attenuation (leakage), and noise reception, particularly from the electronics inside the machine and/or any adjacent metal surfaces. So while these did work, because my installation is marginal (I have some range and blockage problems to punch through) I decided to spring for another, much more expensive pair that used rg178 cable. The thickness and stiffness of that helps ensure a broader curvature when routing the cable, and it's about as well-shielded as a U.FL-connected cable can be. All the same, these are good value for the price and at these short lengths, signal attenuation and RF noise is not that big a concern; in my case I'm just scrounging for all the signal quality I can get.

I bought these pigtails to replace a broken connection in my original set. These are so much more sturdy feeling. The snap that attaches to the wireless card feels solid and it connects with authority. The insulation is stiffer than standard and has a nice sort of smooth surface with just enough of an embossed pattern to provide grip. Both ends are sealed with heat shrink. All-in-all, a high quality replacement for a usually fragile item. I recommend it highly with one caveat: it is only about 200 mm (roughly 8 inches) long. That's not a fault, it's simply a spec that you should be aware of. In my case, it is the perfect length. I will definitely buy these again when the need arises.

I made a modification to a device I have here. This Pigtail cable worked just fine. I suggest to people to be careful when installing these as they are fragile. I might have pulled on the end where the cable actually attaches to the Pigtail because the little middle connector got pushed in enough that it was not making a connection. I was wondering why my signal was not raising when i first installed it. I like how this purchase has 2 Pigtails inclosed ! I was able to take apart my device & use the other one that came with it. It worked just fine. They work great just be careful when handling them installing them in whatever it may be you use them for. I could have used needle nose pliers to pull the middle connector back out but I don't own a pair yet.

If you have to cut the small and off to solder to the receiver the wiring is extremely delicate and small and fragile.

Bought these pigtails to replace the wimpy built on antenna on my router. Popped the cover off, unplugged the old ones, popped them off the case, aligned these to the hole and tightened the nut down and it worked perfectly! Allowed me to use a better omni-directional antenna to allow me to access my wifi in an over crowed area. I've since replaced the router and these have been moved to a modified Wii U for better range with the gamepad.

Used these pigtails with the high gain antennas Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna With magnetic base for Alfa - WUS036H, WUS036H1W, WUS050NH, AIPW610H, AIP-W610H, APA05,...