SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey

Extremely impressed! This stuff is some of the least expensive out there, and works great! Prints come out perfectly and clean. I even forgot I hadn’t cured some recent prints yet because they were so clean post washing and dry. Love this brand!

Cheap and reliable resin, packaged very well. Once my machine was calibrated for this, I found the prints to have very crisp details, supports were easy to remove. I love the translucent. I alternate between blue and red, and I found that I can just mix the colors when one runs out without losing any print quality. I have also found that this material, when cured, responds very well to Dremel cutters. I did recently try the 2kg packaging, and I think I prefer the 1kg for ease of use. But price will ultimately decide what I order next. Also, I have had success adding small amounts of clear tough resins to improve the durability of my prints. But this has not been necessary for the tabletop miniatures I print.

I use this for all my 3d printed statues and cosplay props. Its rigid but not brittle. So it works perfectly for statues. The price point for how this stuff prints is amazing. Im able to use the same printer profiles across all sunlu resins that ive tried, which is a huge time saver.

Okay, I'm not a 3D resin printer expert but I did get this to work after a bit of trial and error and would like to offer a few points for consideration: (a) This is a thick resin. When starting a print, the motor and gear couldn't push the resin fast enough. Therefore, it seems to like to be a bit on the warm side to make it a little runnier. If that does not help, what did work 100% of the time is to use the front panel and sink the build plate into the vat and then start the print. That way it didn't have to push around so much material and printing started perfectly every time. (b) Be careful of void that generate suction. I got into the habit of putting in supports even with not needed to eliminate the suction. (c) Solid forms are still hard and of course, use more resin. Hollowing out will give large forms the soft feel. How thick depends on what you are attempting to achieve, but I just offer this as a note so that you can start experimented from the start. I have not been successful in creating a gadget for an enclosure. I'm still trying to figure out out make those work well. Anyhow, do expect some serious trial-and-error but when you get dialed in, the results are pretty neat. BT recommended if you like to experiment

I purchased the beige resin. I'm a little dissapointed that the default picture on the store is indeed beige, but the actual color of the resin is a peachy "skin tone". The resin itself is thin, which is nice so that it flows well in the vat. It does require a bit more exposure time that my sirayatech resin does (somewhere around 3.5 seconds on an anycubic M3 max). That said, I had no failures out of the bottle using the default Lychee slicer layouts and supports. Lychee is nice because you can enter your machine and resin and there's a good chance it can provide a profile that will get you started. As for the actual prints, they came out crisp and clean. Though I will say the surface texture is noticibly chalky compared to more premium resins. The resin is extremely brittle. Which is typical, but not at all abs-like. The instructions warn not to leave the resin out, and if it would sit more than a couple days, to return it to the bottle. I can confirm that it starts to separate out this quickly, and when it does so, it separates like spoiled milk, with the resin looking splotchy and curtled. Not a big deal, you just have to shake it back up and its good to go. But again, more premium resins can last for a week in my vat with minimal separation. And when they do separate, usually the color falls to the bottom evenly. Overall, I'll probably purchase more of Sunlu's resin in the future. This performance was acceptable for the parts I generally produce as they need to be painted anyway. And hey, it's half the price of higher quality variants. Just make sure you shake vigorously and return leftover resin to the bottle if you're not going to use it.

This resin is a great deal for the amount you get. The price gets even better when you buy in bulk, but even a single bottle is worth it. It was a perfect starter sample — enough for about two full prints, depending on the size of your machine. If you’re just getting into resin printing or want to test out a new brand without committing to a large quantity, this is an excellent choice.

I keep this resin in stock always, use it to make very detailed anime figures. It's a nice color to be painted over. Allows for fantastic print quality and any texture. Very durable once printed!

Cheap price for quality prints, it is my go to for all of my resin printers.

I've tried out the "Standard" variant, and while it's not my primary choice (I typically prefer ABS-like), I've been pleasantly surprised by its durability in comparison to other standard resins available. This aspect solidifies SUNLU as a dependable brand that offers an attractive blend of affordability and quality control. Moreover, it's worth noting that the resin manages to maintain excellent detail in the prints. I've also found that it cleans up nicely without leaving any sticky residue from the cleaning process using the isopropyl alcohol

très bonne résine, très satisfait.

The tips of ghost rider fire tips all turned white. It seems the pigment can't remain as saturated on very fine details.

Finding the proper settings for my printer wasn't as easy as some others. looks great when cleaned and cured. great shade of green wife hates the smell.

Es wirkt, als hätte ich etwas aus Wachs geschnitzt. Das SUNLU Harz ist super und kann mit dem Halot Mage 8K problemlos gedruckt werden. Einziger Minuspunkt und warum ich es außerhalb des Tests nicht kaufen würde: Es ist nicht mit Wasser abwaschbar. Aber das ist meine persönliche Referenz.