Mount-It! Mobile Projector and Laptop Stand (2 Shelves), Rolling Cart with Ventilated Tray, Heavy Duty, Height Adjustable Laptop and Projector Presentation Trolley, Black

I was recently approached by a leading television network to be interviewed in my studio, via a large tablet like all-in-one PC (Cisco DX70-08). The producer needed to have the unit setup in different positions, for different angle shots. The Mount-It stand seemed the perfect choice, rather than to perch the heavy, 14" wide tablet PC on an a bulky, non-movable platform, or cabinet. Moving the PC to different positions was made much easier with this stand. Assembly was easy, and only took about half an hour to complete. The stand seems fairly stable, but if you're supporting a camera equipped device on it, just be careful not to bump it, as it will sway a little, from a strong bump. I never felt afraid the device would not handle the load of a DX70 PC, but it handles it nicely. I also liked the fact the stand's platforms have cable management holes, as well as slits near the edges of the platforms. This makes it possible to strap down a projector, camera, or PC / laptop to it. Also a plus, are the raised edges, which stop your gear sliding right the way off, in the event of a tip-over situation. The platforms are very stable, and made of thick metal. I wish the stand had quick release latches for easy raising, and lowering of the mast. As it is, you have to completely remove the two bolts from the mast, in order to raise, or lower the mast. I also wish the loser platform could be raised, or lowered, as well. As it is, you "have" to sit, if you're running projection, with a laptop. I suppose one could clamp another laptop shelf to the rig, at a higher position. I like the 30 degree tilt capability of the upper platform. The locking casters are also a plus. Great, if you're doing video production with the stand, or positioning a projector. I like that the mast can be raised enough to shoot projection over a seated, or standing audience, no problem. This stand is also great, if you're in a place that won't allow ceiling mounted projectors, as it has a fairly small footprint. I only wish this thing could be easily collapsed. However, it is fairly small, when the mast is lowered, and it's light enough to carry, and load into a vehicle, yet heavy enough, it won't tip over, as long as you don't overload the stand.

This mount is beyond great! 1. Its very heavy duty (maybe steel since it has a good amount of weight to it). The casters are also really good and smooth. 2. It is very slim and has a well balanced weight for the legs so I am not worried about it tipping over. 3. I needed a mount that is slim and can fit behind the couch. This product comes with the center of mass in the middle, so I made changes to the design to fit my needs. Just used a couple of L Brackets and made new mounting holes. Even when the center of mass is moved all the way to the end, there was no tipping or sagging from my 15lb projector (VANKYO Performance V600 - AN AMAZING PROJECTOR). Drilling into this was a bit of a struggle but get yourself a center drill bit and perhaps a step drill bit and go to town with your drill. I also redrilled the holes on the bottom so that is as close as possible to the edge. The weight of the legs are decent enough that there was no tipping with my setup. Very versatile mount and very great quality. I bought from Amazon Warehouse to save $20bucks and it came without a couple of bolts. Clearly by my pictures you can see I'm a DIY'er so a few bolts was a simple task to find in my spare drawer. Only suggestion would be that the laptop mount be height adjustable, instead it is welded on to an exact stationary position. Would be also a nice touch is have some sort of simple cable organizer that can be run down the tube for a clean look.

I searched everywhere for a cart to use for my Dad's lymphedema / leg compression machine. After making a rounded cushion for the top for the leg wraps, this is now the perfect solution. Sturdy, rolls easily and the slots on the shelves make it easy to attach things to them. I do wish the top shelf was a little easier to raise and lower (a ball plunger would be better than the screws).

Very sturdy, keeps my computer and projector in an organized space. And it doesn’t get in the way at all.

I wanted something sturdy to hold my projector (at 5'), a laptop, or other devices and this product did not disappoint! For my needs, the mount-it stand was perfect as it allows me to easily move my projector setup and not be stuck with a permanent location. The stand is quite heavy duty, rolls nicely, and the top platform tilts (in case your projector doesn't have lens shift capabilities). The tilt functionality would also be useful for people that wanted a more ergonomic setting while using a laptop. The welds on this stand are great quality. With the geometry of the stand's base, it's way more steady and durable than any other stand out there in it's class. There are slits in the platforms which allow for cable management using velcro straps or zip ties. The casters have locks on a couple wheels so you can better maintain a fixed position. Anyway, I'm super happy I found this product as my initial research took me to a bunch of shoddy tripod-type stands that just looked incredibly flimsy and were only a little cheaper than the mount-it. However, if you are looking for a tripod-type stand, I would go with the Hola HPS-300B which seems quite versatile and would work well for an outdoor projector use case. The rest of the tripod stands can't compete with the Hola at all.

Bought this for the projector we use in our family room. I also bought the projector for outdoor use. Have not used it outdoors yet, but this far it's been great! Holds the projector and a DVD player. I zip-tied a surge protector to the lower upright and plug everything in there (plus the cords). Keeps the unit portable and not cluttered. I added a portable Bluetooth speaker and we have our own movie theater. This unit is solid and extends pretty high. I use it over the back of our couch and it raises to probably 2.5 to 3 feet over the couch, so no fear of someone being able to sit in front of it and block the projector. Extremely happy with this unit!

Artículo de primera, muy resistente y estable, armado fácil. Ajustable en altura y ajustable en inclinación de la base pera el proyector.

Great Projector Stand ! Very sturdy , solid looking and stable , it came in way ahead of time , very timely for our Church Christmas Celebration . Very good projector stand at the purchased price , the base is very firmly constructed .. highly recommended.

Lo uso para ver cine en casa y colocar la Compu y el proyector, es resistente y funcional

Browsed through reviews of similar stands before deciding on this. It arrived on time and was relatively easy to assemble. I've used it for two weeks and it feels solid and sturdy. It's bottom-heavy as it should be. It's an excellent value for its price.

Se mueve con facilidad, es fuerte y soporta el proyector y la laptop al mismo tiempo.