MICTUNING Car Spot Lights - 2PCS 4 Inch 18W Led Light Bar 1260lm Off Road Driving Fog Lights, Waterproof Floodlight LED Work Light Bar for Car Tractor Trucks SUV ATV Boat

I bought here arrived i think in 2 or 3 days from UK to Ireland. Very bright better than normal quality, and add to the bike (; as nice looking.) i have to say good quality i have them for a few weeks now, and i was out in al kinds of weather. So definitely waterproof. Not I only bought one set which is one light for each side. So use them just for dims. If you need them for full lights, and dims yo you'd better buy two sets. Second Note: I only bought the lights; as I had parts to make a bracket to hold onto my bike. PLUS BOTTON TO TURN ON/OFF ( YOU'LL NEED) USAULLY ADVERTISED BELOW. I then just simply attached the to the battery.

I installed these on my motorbike and have found them to be amazing. Very clear light, extremely easy to install and seems to be very sturdy in construction. One thing to note is that it does not come with a mounting bracket and this will need to be purchased separately. It took about 20 minutes to install. Also, it is important to note that these are very bright and maybe a hindrance to other drivers, I was sure to point mine down towards the ground to avoid such an issue.

This was fitted to my Mitsubishi L200 Barbarian, and paired with the Mictuning 32" LED light bar in the lower grill and these on the Mictuning bull bar style mount and they look awesome. What a difference they have made, my standard headlights are Xenons and the full beams are halogens but these lights especially paired with the big light bar drowns out all the headlamp bulbs on my truck (and the headlamps are genuine Mitsibishi Xenons) I work in the country and routinely drive roads with no road lamps which during the winter usually has a foot of snow and these without a doubt will make it a safer journey, the odd occasion I've had to pull someone out of a ditch in my truck and although these aren't advertised as movable with a 13mm spanner you could move them very quickly to light up an area off the road which makes for a safe recovery. It was well packaged and I wired them to the included wiring loom I got with the 32" one and spurred the relay to my main beams too so I don't have to turn them separately. Can't recommend enough and would definitely buy more of these for the loadbay area when I get paid next month. UPDATE 27/10/2016 - The brackets that were supplied have completely rusted, this is just autumn so I dread to this how they will look at the ends of winter, I will have to look at other mounting options.

Although small, these lights are very bright. More of a flood than a spot, but for the price n size these are awesome! I've only just fitted them so I don't know about how long they'll last, but the construction is solid and they seem robust. I purchased the loom to fit them too and it's ridiculously easy. I'm a total mechanical mong and easily fitted them and got them working!

Although the advert insists that these work on motorcycles, cars and ATVs etc etc. Be aware these lights are 30 volts only and will not work on a 12 volt system. ie normal car bike etc. This I found to my disappointment, my fault as I only read as far as motorcycle and stupidly assumed they were 12 volts. Sadly not. I had already disposed of the packaging by this point. Read all the wording to make sure it is known what you are buying.

I bought these after seeing a "YouTube blogger " fit them to his BMW GS motorcycle as they looked very bright. They are, I have fitted them to a ST1100 Pan European and they are bright enough to swamp the dipped beam on the bike. I also bought a wiring harness as well as it made wiring them up a lot easier and as you can imagine there is an excess of wire for a motorcycle but this was lost either by trimming or doubling it up. If I have one small complaint it is the very weak battery connections, they could and should be a lot better. Other then that, I am very happy with the whole package.

Purchased these for my motorcycle as a secondary set of lights due to my headlights being very poor. First impressions, they look well built even though the cables come out of the same side on each housing which is a bit annoying as it means that its tucked out of sight on one side and clearly on show on the other !!! The cooling fins are a bit flimsy and the brackets aren't very self explanatory but I made do and got them to mount how I wanted them. Admittedly I removed these and returned for a refund as they kept flickering so I may have had a bad set but when they worked, they were very bright. Cheap and cheerful indeed !

Fitted these tonight to my Quad bike. Have to say for the money i am really impressed. Read on here people commenting these are floods or these are spots. Ok just to add to this i would say they have a spot focus with a fairly good wider flood also. I drove these up through woods tonight and i found ample lighting ahead and all around me. I may well add the light bar from this supplier also, bit quite frankly these lights are enough already, but if you want daylight flooding nearby then go for the strip also. Pros Good light pattern and compromise between flood and spot Brackets and bolts supplied good quality Cons Perspex thin style cover over lights, i feel the only weakness here if they were cake in alot of mud i think youd need to be careful hosing off first to prevent scratching the clear perspex lense cover. Apart from that i really recommend these.

Perfectas nunca me hubiese imaginado que estos mini Leds pudieran hacer tanta luz. La verdad es que he quedado muy contento.

Parfait

I installed this to the mirrors of my cbr1000rr track bike (which I installed the original mirrors onto) using an h7 adapter from ebay $5 to plug into the orignal harness. The left light pointed high and the right low for high and low beams, the results are beautiful! I couldn't be more happy. These lights are bright and it's amazing what you get. Make sure the screws are tight, I noticed a few loose and tightened them. Maybe I'll add a photo later. The results are bad a$$!

I installed these on the front of my ATV. They are quite bright and a big improvement over the stock halogen headlights. That appear to be well made and are all aluminum. Be careful not to ivertighten the bolt that attaches them to the bracket as you can damage the light and be unable to tighten it. The nut will turn. They came in a plain brown box with no instructions, not in the Mictuning mix depicted in the ad. But, anyone can figure out how to install them.

I just installed these work lights on my tractor to illuminate the work area for my back hoe. I haven't had the occasion to use them yet other than to just test them for alignment. They put out plenty of light. The four star rating is strictly due to the inadequate length of the wiring harness that came with the lights. I ordered the longest harness available (12 feet) which was not enough for a tractor installation. I ended up having to splice in an additional 6 feet on order to get everything connected and tucked away safely. Otherwise they are great.