Avery Printable Single-Sided Business Cards – 85 x 54 mm, 10 Cards per A4 Sheet, White, Pack of 250, C32011-25

I like these. They feed through my laser printer without fuss and have never jammed, even though it's a fast laser that feeds 70 pages a minute (yes seventy not seventeen). Fast laser printers are a good test of the quality of any print media as they are much more prone to jams with poor paper or card. The resulting print quality is as crisp as with the best papers and stays on the cards. When separating the cards the resulting edges are properly sharp, with none of the fuzzy edges that result from some micro-perforated cards. The result is fine for contact cards and reasonable for business, though in some businesses you might want heavier card stock to be taken seriously.

Instead of getting 100 plus cards, I can print number required as and when. Good quality card and on line templates fit.

I bought these to use as membership cards for 150 people. It was very easy to use the template to design and print the desired format including a predrawn logo. The layout fitted onto the individual cards exactly. The cards broke apart very easily and neatly. I have not tried mail-merging names onto them but not everyone would want to do that.

I manage membership for a small club and needed to replace our old laminated card system with cheaper ones that I could print myself as needed. I chose these cards as they are not too expensive, are good quality, thick enough to last in someone's wallet for a year and can be processed by an inkjet/laser printer. The only downsides to using them are ... * The rear of the card is treated with something that prevents ink/toner from being absorbed. Printing on the front has no problems but anything printed on the rear using a laser printer will not survive even light handling. Printing on the rear using an inkjet can result in handlable cards, but you have to wait 18-24 hours for the ink to dry properly. * You cannot easily re-use partially printed sheets so wasteage can be high. Removing a few cards form a complete sheet often stops those sheets from being run through a printer for a second time.

Easy to use these to print membership cards on my hp ink jet printer. Simple to push printed cards out giving a professional finish.

Excellent product delivered quickly.

I predict that in ten years no one will have a business card of any type. However, in the meantime these do an excellent job. Print quality obviously depends on your printer (duh), but our high quality laser produces a good result. Just make sure you snap them out as directed, or you will be left with ugly paper bits on the outside of your cards.

If you feed the sheets into the printer separately, there is no problem with jamming despite the thickness of the card and the fact that each sheet is 10 cards loosely connected! Very simple to separate the cards after printing, and all with clean edges - no micro-perforations. Print quality good when set to matte.

Fácil de usar. Programa online muy intuitivo.

Sehr gute Papierqualität und hervorragendes Druckbild. Super glatte Schnittkanten, machen einen professionellen Eindruck. Ich verwende einen Tintenstrahldrucker und bin mit der Qualität sehr zufrieden.

Attenzione : in caso si voglia stampare il retro bisogna usare una stampante laser in quanto è rivestito da una foglia sottilissima in polietilene ed i normali inchiostri non essicano.

Not sure if it’s the paper or printer settings but I can’t seem to get it to work unfortunately

Ottimo prodotto, lo usiamo da anni per stampare badges personalizzati per partecipanti a congressi. Non si inceppa neanche nelle multifunzione