Airbrush Kit with Compressor - 48PSI High-Pressure, Non-Clogging Air Brush Set Cordless Rechargeable with 0.3mm Nozzle and Cleaning Brush for Nail Art, Makeup, Painting, and Cake Decorating

I bought other variations of this with the tank coming out with the hose coming out to a small handgun from other websites i found that hose always had clogging issues,Air issues, It was always one thing after another. No matter what variationsi change: the paint thinners,cleaners,brand of paint, but no matter what, in the end, ultimately, those always screwed up. The only thing I didn't do is go and buy, but you know, top of the line two hundred and fifty dollar just for the gun part of it, I'm not a professional like that yet. I didn't I like the fact that this was one kind of big thing unit.I felt like it might not have the control I want. Let me start over, so this is not for me. This was for my niece, but me being the artist with my inner child and hippie I felt like the need to master eagles, dragons and marijuana herb artwork sprayed on back of jackets and clothes at festivals for money out of my car.. Totally kidding.. I've purchased multiple variations of paint airbrushes and this one I can honestly say had no issues of the clogging, the handling is clean just as easy as using the pen ones, the pressure from the air i can't complain its just right... Overall, I mean, I don't know why I went to the trouble of all those other variations and spending more money when I should have started on amazon, where I always shop in the first place. And let's just say I had to buy three different versions of this from other companies before I found this one and i spent hundreds of dollars. Ultimately, those all had issues of clogging, mechanical error, they made returning the item impossible and unreasonable no matter how how thin you made, the pain or changes the variables, they always crap out. I recommend on my niece's behalf, but i'm glad I wasted it all the money and tried the other ones because if I hadn't gone through that process going to the bad ones I wouldn't appreciate this one for what it was. Oh, and one last note The machine doesn't sound like a screeching or a dying cat. The noise is reasonable. As far as durability, I haven't, I smashed it on the ground or ran over it with the car so I can't ill tell you on that level. I don't think I would recommend it though lol.

I bought this airbrush after wanting one for a while, but not wanting to spend too much money. It arrived quickly, and everything is neatly organized. The instructions were pretty short, and while it mentions the importance of cleaning there isn’t a ton of information on how to do that. Luckily there are a lot of YouTube videos out there and I ended up taking mine fully apart between colors, dropping the pieces into a cup of acetone, and using the brushes included with the airbrush kit to really clean all of the crevices. Then I took out the pieces and let them dry and everything worked great! The quality of the machine is great, my AirBrush came out really nicely. Be patient with yourself as you are learning what air settings work best for what you’re doing. The instructions had a really helpful guide of what problem causes what type of splatter, definitely refer to that. Overall, it’s a sleek looking airbrush that works well, is easy to use, and easy to clean

Two things to know: 1. The Airbrush is top notch. Accessories the same. Compressor? Not so much. 2. I tested the compressor after purchase. It worked. Then I tested it again a month later. Also worked. The third time I actually used and it did great job of makeup application. Then I tried to turn off the compresser. Nothing. The compressor continued to compress. How was I supposed to turn it off? I thought maybe the on off button that gives you 3 speeds was stuck? I unscrewed the base. Inside was a battery and a circuit board. The button on the exterior was loose up against a square switch. The switch appeared to be cracked. The black part of the switch that is depressed was not depressing or undepressing. Just sitting there. How did I turn it off? The battery cable attaches with a plastic connector. I pulled that off and the machine ceased compressing. Blessed silence. What does this mean? In normal law there's a thing called warranty of merchantability which says that if you sell an item and it doesn't do what it says it's supposed to do, the merchant has to take it back. Why should the consumer eat the cost of bad manufacturing? My kit can't have been the first and only one to have a broken compressor. So them not fixing the issue borders on fraud or violating the warranty. Regardless of Amazon's stance (you didn't discover the fraud in time so no return for you) this isn't a good way to treat customers. I want my money back. Oh, I can't clean the Airbrush because the compressor is broken.

Got this on sale, and it's a great little tool. It seems to be great quality for the price and works as intended. It's pretty light and the built in compressor is so convenient and not too loud. The assembly is a little complicated, but as it is an airbrush that is to be expected. I use it for painting base coats, not for details, so I'm unsure how it would handle miniatures/40k figurines. If you don't clean it properly and don't thin out your paints as instructed, you're going to have a bad time, but if you follow instructions, this is a great beginners option or a way to test out the medium. As with any aerosol, please remember to use a mask!

Works really well for my Model horse customs! The cleaning stuff and different size like bottle things are great too

I've had this airbrush for a couple months, for the day the need arised that I would need it for 3d prints. I have everything I need to service the airbrush and the airbrush paints. Well, the day came, I needed this to put a layer of valejo gloss varnish on a clear resin print, it takes the cloudy finish to a glass like look. Well, after a couple hours of researching hour to use the airbrush, how to clean properly, what to look for. I decided to start testing. I added the smallest cup, a few drops of flow improver, and tested it on the second speed, on a failed print I had no need of. It worked fine, an extremely light mist. I tested for maybe 1 minute, happy with the result. I immediately put the print I needed to finish into my booth sprayed my hand first to make sure and started to spray the print. It took 5 seconds of spraying before it shot a shotgun blast of large drops all over the print. I had to quickly grab a brush and flatten all of the big drops on the print. Tried cleaning, testing, over and over, spent a couple hours trying to get it working. Nothing. If anything comes out at all, it's a sputtering mess. So I got 5 minutes and 1 second out of this machine, it ruined my print, that I had to take 20 dollars off of, because after a sputter of varnish, I had to do the rest by hand with a brush and it looks awful, it needed airbrush coats. I want my money back, if I do, I'll raise it 1 star. If I don't, I'll update this review telling you what to expect from this company.