Koala Printable Glossy Sticker Paper for Inkjet Printers, White 8.5x11 Inch Self Adhesive Photo Sticker Printer Paper (120 Sheets)

Photo printing on these sheets, got great results using my Canon PIXMA printer.

malisimo, la impresora epson L3250 se atora el papel en ella, se enrosca parece humedo aún, se atora en la impresora no me gustó ni me fué útil

يمكن يناسب طابعات الليزر اكثر

I ABSOLUTELY LOVE this sticker paper! It’s great quality paper, high gloss and sticks perfectly! I printed it on my well used Epson 2800 series inkjet printer. I used photo glossy and high settings. As a crafter I’ve used many different sticker papers and this far surpasses any that I’ve tried in the past. My printer didn’t jam at all and I printed up to six pages in one batch. No jams, no steaks, no wet ink blotches; perfect print every time. I made composition notebook covers for my grandchildren and they loved them; they thought I purchased them from a store! At 120 sheets for about $22 it’s a win-win! I would rate this product 10 out of 10 — would definitely recommend!!!!

Update (2022): It seems that the adhesive of this sticker paper as of late have not been up to par so I would recommend reading the latest reviews (Feb/ March 2022) before you buy. I am leaving my review as 5 stars though, because my rating is based on my impressions of the product I purchased and received in the past :) --------- Update (2021 Mar): Added custom cut settings for silhouette portrait 3 --------- Original review: I was a little bit apprehensive about trying this paper out based on some of the reviews I read, but I'm glad i gave it a shot! I've used a few sheets now and so far, I have yet to encounter any problems with this product. In my review, I will also address some of the points that other reviewers have mentioned and some suggestions that might help if you are unsure about buying this paper. 1) The odour: Yeah I have to agree with other reviewers in pointing out the smell (the adhesive perhaps?). It's definitely there. I wouldn't say it's downright unbearable, but I can certainly see why people don't like it. It's probably just because there are so many sheets in the package that altogether, the smell is pretty strong since I can't smell anything coming off a small handful of stickers cut from this paper. Edit: after some time, the smell has faded considerably. The smell is no longer noticeable unless you bring it up to your nose. 2) Paper jamming: So far, I have NOT had any issues regarding jamming in my printer (Canon MX330). I think this might come down to the type of printer (loading mechanism?) you have and how many sheets you try to feed in at once. I usually only load 1 sheet at a time since I don't need to make my stickers in bulk although I have loaded up to 5 with no issue. I've heard a few comments from other people who say that some models that use a bottom feeding tray might have issues with passing thicker paper through, although I don't think this paper is particularly thick. The thickness is comparable to something like a light weight index card, if that gives an accurate comparison. 3) Adhesion: No issues encountered thus far. Stickers have stayed on virtually everything I've stuck them to with no peeling off. Depending on the surface you stick it on, you may be able to remove the sticker off without leaving any residue. Do note that if you try to remove the sticker, you'll probably damage it. It's hard to explain, but the surface gets crinkled with the action of peeling it off. I'd consider this sticker paper to be one time use. 4) Coating: The glossy paper is really nice and makes colours pop! Compared to my really expensive sticker paper which has a bright white, this paper has more of a cool, slightly off-white. I've used some paper where the gloss coating scratches when I run my nail across it, but this paper has held up to light scratches thus far. You can probably use some sort of coating to prevent some wear and tear, but since this material is still paper, you should expect that anything that ruins paper can ruin these stickers -- especially water! I have used this paper for shipping labels and I have not had any issues with barcode scanning (your mileage may vary). I prefer matte for shipping but I was in a pinch and didn't have any on hand. I have also written on the paper with permanent marker without any problems, although if you try to go over the same spot multiple times, the marker might eat away at the paper's gloss finish a bit... *** Printing tip: Be sure to set your printer to glossy media settings and avoid using the black ink cartridge, or any ink that is pigment based. Set your printer to use colour only and/or tweak the black to be an off-black. The reason for this is because black ink in my experience is usually pigment based and so it won't fuse properly with the paper which results in smudging! For the price, I'd say that this sticker paper is definitely one of the best I've tried. I was also a little skeptical as to whether or not the glossy package really came with 120 sheets so I weighed it on my scale. I had already used a few sheets, so my package was 1397g (each sheet is approximately 12g), for a total of 116 sheets, so there are definitely 120 in there (weird number for a pack of paper, but I'm not complaining). Do note that the backing is a FULL, UNCUT sheet, meaning there are NO SCORE LINES to help you remove the backing. I personally prefer this since I use this paper to make stickers, but it might not be preferable if you are looking to make something else like shipping labels. The backing sheet also has yellow text that say "PHOTO PAPER" running diagonally in multiple places, so keep that in mind if you are looking for a product that doesn't have any text on the reverse! Personally, I prefer a blank lining sheet because I think it looks more professional for my stickers, but I'm probably just picky about aesthetics. I just use the sticker paper for making return address labels and packaging stickers for my store so this doesn't bother me. In any case, I wouldn't dock a star for that minor detail. If you have a Cricut and are looking to make stickers, here are my settings that might help you out... I should point out that my blade has been used for several projects so at the time of writing my review it's not new. Each Cricut is slightly different so only take these numbers as a rough guide and adjust accordingly: Kiss cut: 140 Die cut: 200 Edit: Here are my settings for silhouette portrait 3! Kiss cut: force 3/ speed 10/ depth 3/ passes 1 Die cut: force 14/ speed 10/ depth 3/ passes 2 Tl;dr: 5/5 in my books!