ATG Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool

Very pleased. For the folks complaining about no instructions. I’m not sure why they can’t look it up on Google or watch a video on YT. The product works great, it’s very sturdy. The only catch I ran into was the plastic inserts were a bit oversized so you gotta kinda work them into the grooves and that shaves away the excess plastic. I used a small punch set armorer hammer to gently tap them into place. Once that was done, they are a perfect fit now and can be easily exchanged between the different insert sets.

This is a review worth reading if you need a pistol sight pusher. I have 2 other highly rated sight pushers. One $100+. Changed out enough stock sights that I refused to bang on them with a hammer & delrin anymore. Upgrading to tritium night sights? You don’t want to bang in this with a hammer. Can cause permanent damage. Hammering in place not a very accurate way either. My other sight tools work ok but both have issues & some slides won’t fit quite right. If you’ve used a sight tool before you know proper holding of the slide makes a big difference. So this ATG is very well made. Good fit and finish. Seems well thought through. Example: doesn’t just hold slide from sides. Nice round screw plate on bottom so you can adjust to the height of your slide. About a 3” round plate big enough to give great bottom support. The sides screw in to hold slide. Delrin inserts so no steel contacting your slide. Holds sides very firm. The Felton inserts are not perfectly flat, so will work on slides other than perfectly flat Glock slides. Then they go a step further and provide a 4th plane of support with a top screw (also with delrin insert) that adjusts down on top of your slide. Last the heavy duty steel pusher when properly aligned will move the tightest site. You carefully set this bad boy up and it will remove and reinstall your sights. I’ve used it now on Glocks, 1911’s, CZ75 & a SIG micro 9. Worked well on all. Probably some slide out there that won’t fit, but it would be a 1%-er. I don’t think you’ll be disappointed. PS: no instructions included but intuitive setup. If your buying a sight pusher you’ll figure it out. By the way it comes with a nice zippered case with urethane foam cutout to fit tool. Extra delrin protection inserts. They’ve though of almost everything. For $60 you can’t go wrong.

Very well made, and the carrying/storage case was an extra plus. At $44+ - felt like I got my monies worth. Recently purchased Trijicon HD night sites and read the reviews on the difficulty of installing the rear site. Since I do all of my own gun work (by no means an expert either) I decided to give this product a try, rather than chancing damaging the tritium-phosphur site tubes using the good old punch method or taking to a gunsmith to install. Already had removed the Glock OEM plastic rear site easily using a plastic punch without damage. The Trijicon (metal) rear site fit VERY TIGHT. Even after several passes of the bottom of the site over 1200 grit sandpaper to remove any high spots, the fit was perfect but tight. Very high quality Trijicon fit and finish. Using the NcStar tool, the slide was cinched down on all four surfaces. Advise using vinyl electrical tap on the side clamp surfaces, the surface of the moving slide of the tool that makes contact with the site, and on the top side of the pistol slide itself to avoid making any potential marks or scratches on the slide during the installation process. A drop of oil in the site channel (wipped across with my finger) also helpful. Take your time and check all settings before wenching the movable tool slide! The NcStar tool worked like a champ! The Trijicon rear site was so tight. I proceeded by holding the NcStar tool secured in a vise, and used a 15mm socket (with ratchet). NcStar was thoughtful in offering this alternative method to turn the movable slide, rather than the provided turning handle. Made installing easy - went on without a glitch. Centered the rear site as needed. No damage to the site or slide. Highly recommend this product over costly site tools costing 2-3 times the price, taking to your gunsmith, or using the "punch" method.

I have been an handgun shooter for many years and I collect handguns. That said I usually upgrade my sights. Prior to this tool I took my guns to a gunsmith and paid them $40 to remove and install the new sites. 2 sight upgrades and this press pays for itself. The good: Works great for removing and installing dove tail rear sights. Easy to figure out, easy to use, and easy to adjust sights. Small enough to take with you to the firing range and adjust your sights. Very satisfied. The bad: No instructions come with the press. Also the slide locking clamps do not have marking so you can center your slide. There are some markings for the sight press itself but they are nearly impossible to see. These marks would assume you have your slide centered and are not particularly useful. The ugly: There is a wheel for adjusting the height of the slide so the sights themselves reach the press area. However if you adjust the wheel up to the top of its range it interferes with the slide clamps. There is a shim included which I assume is for placing under the slide to remedy this. There are also inserts for the slide clamps so you do not scratch your slide but they don't really fit well or at all in my case. Summary: For $58 dollars it is a bargain! It works and is heavy duty. It is not perfect but you can figure out how to get the job done without being a rocket scientist. I love my purchase and I look forward for zeroing in all my handgun sights at the range. Remember to order a bottle of thread locker and a set of both SAE and metric Allen wrenches to tighten and loosen your sight screws.

This thing come in handy for changing the rear sights way better then using a brass punch and hammer to beat them out. I will say that the bolt that moves the pusher side to side is hard to twist but put some gun lube on the threads and work it back and forth and it will get easier. Used this on my G19, G21, and PDP. Work like a charm.

Me encantó el material, muy buena calidad. De las mejores herramientas que puedes tener para cambiar o ajustar tus miras.