

❄️ Stay Cool, Drive Confident: The Radiator That Works as Hard as You Do!
The DWVO Radiator DWRD1012 is a direct OEM replacement designed for 1996-2005 GM 4.3L V6 vehicles including Chevy Blazer, GMC Jimmy, S10, and others. Featuring a TIG-welded aluminum core with brass transmission oil cooler and high-density multi-louvered fins, it delivers superior cooling efficiency and durability. Packaged securely with foam protection, it supports easy installation using existing mounts and sensors, making it a reliable, leak-free upgrade for professional-grade engine temperature management.











| ASIN | B07GKWRXDW |
| Best Sellers Rank | #1,462 in Automotive ( See Top 100 in Automotive ) #1 in Automotive Replacement Engine Radiators |
| Brand | DWVO |
| Customer Reviews | 4.4 4.4 out of 5 stars (4,376) |
| Date First Available | August 17, 2018 |
| Exterior | Machined |
| Is Discontinued By Manufacturer | No |
| Item Weight | 13.57 pounds |
| Item model number | DWRD1012 |
| Manufacturer | 15120548 |
| Manufacturer Part Number | DWRD1012 |
| Model | Radiator Compatible with GMC Chevy Blazer S10 Jimmy Sonoma Hombre Bravada 4.3L V6 |
| OEM Part Number | DWRD1012 |
| Package Dimensions | 34 x 19.8 x 4.7 inches |
O**H
Works great
Perfect fit and install. Replaced a cracked radiator on my chevy silverado. Product seems of decent quality nothing broke on install so thats a plus. Everything seemed just like the original however the plastic seemed not quite as thick. Its been a few days since install and have zero leaks. I would buy it again. Must take old mounting hardware from the old radiator and use on this one. Was packaged nice with no damages. The radiator keeps the temperature at 210 like it's supposed to.
L**R
Aftermarket brand that's an exact fit and does what it supposed to do - cool the engine!
The week of August 6-12 was soaring high heat and severe heat warning/record high to most cities in the Phoenix AZ area. I was driving home from work around 1/4 to 8PM when i suddenly saw on my dash "check engine" and quickly observed all gauges and saw temp at RED line so immediately pulled over to the side of the road and quickly put the vehicle on hazard lights and turn off the engine. My 2000 Toyota Camry LE 4 2.2L 4cyl car has experience engine overheat due to the radiator tank (top part) cracked almost 3 inches long. I had this aftermarket installed myself when my OEM radiator (made out of brass tank) has finally retired at 180k miles of driving in AZ. That aftermarket radiator lasted almost 5 years and at about 50k miles of driving. It probably gave up due to the extreme heat we had experienced during this 2023 summer. I was able to get home safely by letting the engine cool down a bit and I have my go to bag tools always in the trunk with 2 gallons of water that i always carry in circumstances like this. I applied several 3M packaging tape to the top tank (made out of plastic), fill the reservoir all the way to the top and slowly filled the radiator (2 gallons was more than enough). I left the radiator open (didn't install the cap) so the pressure wont build up and to allow the tape to patch/stick long enough for me to drive the car home ( about 4 miles). I made it safe and sound. I bought this DWVO Radiator and which by the way is 1/4 of the price of what i paid for with an aftermarket brand replacement from Oreilly 5 years ago. The radiator comes securely packaged with enough protection to prevent damaging the aluminum fins. The ATF oil cooler lines were made out of brass connector and it comes with drain plug (it does not come with radiator cap and AT sensor). What i really love with my good old Camry is that everything is as easy as DIY so removing the broken radiator was very easy. Installing the 2x aux fans matches exactly the mounting holes and radiator snug fit when i position it in the engine bay. Do not overtighten the ATF oil cooler line brass adapters just snug fit is enough. Reinstalled the existing AT Sensor after thoroughly cleaning the sensor body. First top off was pure Distilled water to flush out the remaining tap water i poured in with my 2 gallons. 2nd top off was 50/50 mix coolant (yellow ethylene glycol based engine coolant) used 1 gallon and drain again. Final top off another gallon of 50/50 mix coolant (i used super tech 50/50 premixed coolant) including the reservoir to max line. This Camry model engine 5SFE does not have a bleeder port and the way to bleed air from the cooling system is to squeeze both upper and lower hoses gently while engine is running idle and radiator cap off. I did a few times but the coolant bursts out of the radiator when the engine reached its operating temp which i noticed on the temp needle the temp rises 3/4 means there is something wrong with the cooling system (suspected cylinder head swelling, damaged head gaskets, damaged water pump, or thermostat). I let the engine cool down, fill up the radiator with coolant and lock the cap in place. Started the engine and observed the operation of the 2x aux fans which should run automatically when the engine temp reaches between 280-300F which means water pump still work, thermostat still good as well as the AT sensor. I decided not to use the car for work for a week and just drive around doing short trips errands and observing the temp as well as the reservoir level. I noticed the temp needle is steady even at 114F outside temp driving but had to fill the reservoir back to max line 3x before the air lock system has finally adjusted and all air was dispensed through the reservoir tank. I have driven the car for more than 5k now since replacement and the temp still steady needle just below the mid line and the reservoir tank steady at max line. I still kept a gallon extra of the 50/50 mix coolant just in case and a gallon of distilled water plus my go to 2 gallons water for emergency or top off. Very satisfied with my purchase. I know i dont expect this radiator to last very long despite routine coolant flushing and maintenance especially here in the AZ desert driving condition. Best bet would be same as the last aftermarket radiator but I am hoping this one from DWVO could outlast and get me at least to 6-7 years before i have to replace it again. Overall experience with this product 5 stars. Highly recommended!
A**R
Right product
Exact product i needed for my ‘09 Toyota Camry. Easy to use and set up. Def fits and fits perfectly. No issues and had it in for 1 month
J**S
Works great
Just installed, so far so good. Fit my 2004 Camry very well
M**N
Great quality part
This is a super find! A lot cheaper than the local parts store. Came fast. I needed because I had a slow leak in my old one. Quality product would order again.
T**.
Money saver
Perfect fit! 2003 Monte Carlo SS. This is the way to go, instead of paying$200 or more at the big name auto parts stores, for $70 you can have an exact fit for your OEM part. Wish I could give it more stars!!! Extremely satisfied!!!
D**D
Seems to be holding up well
Replaced my cracked unit and no issues months later.
M**N
Love!
Fits perfectly with my car!
A**N
Came broken and unusable. Manufacturing defects and poor quality. Don’t waste time or money.
D**E
Fit and works perfectly
L**T
haven’t installed yet but its very weak material. bought it knowing it would be. but it should last until i get a decent one
A**R
Installed radiator made up all line filled it with antifreeze and when I started the engine I found both engine cooler line leaking. As per an earlier review the radiator engine cooler line make up but don’t seal.
Trustpilot
3 days ago
2 weeks ago